Please take a look at Fukuda's dedicated leak test system for small electronic components!

This is a composite airtightness testing device that completes filling by bombing, gross leak detection through pressure change confirmation, and fine leak detection using mass spectrometry, all in one unit.

The "MSX-0101 series" is a compact leak testing device specifically designed for electronic components such as MEMS, crystal devices, and SMDs. It is fully equipped with helium filling, gross leak testing, and fine leak testing in a single system. By managing the filling time and waiting time, it allows for proper gross and fine leak testing. 【Features】 ■ Ideal for leak testing of electronic components such as MEMS and SMDs ■ Quantifies gross and fine leak amounts while managing filling time and waiting time ■ Capable of performing both gross leak testing and fine leak testing with one device ■ Enables highly accurate fine leak measurement by appropriately setting bonding conditions and gross leak conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

This is a leak testing device compatible with ultra-small packages measuring 1.0 × 0.8 mm and 1.2 × 1.0 mm.

The "MSX-7000 series" is a leak testing device for sealed package products such as small electronic components, crystal oscillators, MEMS and optical devices, and various sensors. With a new mechanism, it has achieved inspection of sizes as small as 1.0 × 0.8 mm for the first time, and the transport accuracy has improved through position correction using image processing. It can perform both bomb testing and gross/fine leak testing in a single unit. 【Features】 ■ Achieved inspection of sizes as small as 1.0 × 0.8 mm for the first time with a new mechanism ■ Improved transport accuracy through position correction using image processing ■ Enhanced gross leak sensitivity to 8.5×10⁻⁸Pa·m³/s *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

High-sensitivity leak testing for small electronic components! We offer solutions down to ultra-fine leaks [patented technology].

The "MUH-0100 series" is a leak testing device specifically designed for ultra-micro leak measurement that employs the "capsule accumulation method." Our company has developed a high-sensitivity helium leak detection technology called the "capsule accumulation method" for measuring ultra-micro leaks. MEMS components such as angular velocity sensors and infrared image sensors, as well as small electronic components, need to maintain their sealing properties over long periods, requiring high airtightness. 【Capsule Accumulation Method Features】 ■ Capable of measuring up to 4×10⁻¹⁵ Pa·m³/s (He) ■ Significantly reduces background noise ■ Capable of detecting ultra-micro helium leaks ■ Reduces the influence of gases other than helium, which can be sources of error ■ Eliminates the need for heaters or ultra-low temperature pumps, with startup maintenance times comparable to standard helium leak detectors ■ Commercially available standard leaks can be used for calibrating helium accumulation amounts *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

Introducing our lineup of fully automatic machines, dedicated machines, and tabletop types! We present a specialized airtight inspection device for small electronic components.

The "MS series" is a leak test system for small electronic components that require airtightness, including: - Crystal devices - Ceramic oscillators - Optical devices - Power semiconductors - CAN devices - Laser diodes - Capacitors Leak testing of sealed products may involve both gross leak and fine leak inspections, depending on product specifications and characteristics. We offer a lineup that includes fully automatic machines capable of performing the entire process in one unit, custom-built dedicated machines, and convenient tabletop types for sampling inspections. 【Lineup (excerpt)】 <Fully Automatic Devices> ■ Gross Leak Test System - MSZ-6200 - MS-6086 ■ Bombing Gross and Fine Leak Test System - MSX-6110 - MSX-6200 - MSX-7000 *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

PFAS-free! Why not switch from using fluorinated inert liquids for liquid immersion testing to pressure leak testing for airtightness inspection?

As an alternative inspection method to liquid immersion testing (leak testing) using per- and polyfluoroalkyl substances (PFAS), Fukuda Corporation has been providing airtight testing equipment using pressure change leak testing methods for some time. The 'MSA-0101 series' is the latest airtight testing equipment for sealed products that confirms gross leaks. It is designed for small-scale applications such as testing during device development and random airtight inspections. (For mass production testing or line integration, we offer fully automated testing equipment in the 'MS series.') The product size for inspection ranges from small devices measuring a few millimeters to medium-sized devices up to 80 × 70 mm, which can be accommodated by manufacturing measurement jigs (cores).

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Environmental Test Equipment

Fully automatic airtight inspection device for relatively large electronic devices such as LEDs, optical devices, high-frequency devices, power semiconductors, and IR sensors.

The 【MSX-7003 series】 is a leak testing device designed for relatively large electronic devices ranging from medium to large sizes. It is capable of performing leak tests on electronic devices smaller than 10 mm square, such as LEDs, optical devices, high-frequency devices, power semiconductors, IR sensors, gyro sensors, angular velocity sensors, and electrolytic capacitors. The 【MSX-7003 series】 is the top model in the series and is a composite leak testing device that automatically performs three processes: - Helium bombing - Gross leak test - Fine leak test It is also compatible with inline applications (the pass line height is 940 mm). Additionally, we offer a lineup tailored to customer needs, including: - The 【MSZ-7003 series】, designed solely for gross leak testing - The 【MHX-7003 series】, which performs bombing and fine leak testing - The 【MSH-7003 series】, which does not have a bombing device You can watch a video of the actual device in the YouTube link below.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

At Fukuda Co., Ltd., we not only sell standalone testers but also manufacture leak testing equipment tailored to our customers' requests and specifications.

At Fukuda Co., Ltd., we not only sell standalone testers but also manufacture leak testing equipment tailored to our customers' requests and specifications. We believe that by not only providing leak testing machines but also maintaining and improving seal jigs and components around the testers, we can achieve high cost-effectiveness and equipment stability, and we are promoting the provision of equipment. Our lineup of leak testers includes flow meters, air, hydrogen, and helium-based testers, allowing us to meet a wide range of customer needs from parts to assembled products, low pressure to high pressure, and small flow rates to large flow rates. Please feel free to contact us. ● Automotive-related Intake manifolds, common rail systems, lithium-ion batteries, cylinder heads (oil and water passages), cylinder blocks, in-vehicle harness assemblies, fuel tanks, delivery pipes, injectors, brake calipers, headlights, battery cases, heat exchangers, etc. ● Electrical and electronic-related Harnesses, electronic components (fully automatic), electronic components (desktop type), MEMS, quartz oscillators, ceramic resonators, relays, switches, connectors, cable assemblies, waterproof cameras, clocks, etc. (Continued below)

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.