We will hold a company information session for new graduates in 2024.

Top class in industry share!! "Takaya," the company that gathers trust and support from around the world for its circuit board inspection equipment.

The "electronic circuit board" is one of the important components widely used in various fields as a fundamental part for controlling electronic devices. The "board inspection equipment" developed by the Industrial Equipment Division is an "in-circuit tester" designed to inspect whether all components function correctly and whether there are any installation defects after various electronic components have been mounted on this "electronic circuit board" (ICT: In-Circuit Test). Among these, the "flying probe tester," which uses a needle called a "probe" that is rapidly moved by a robotic arm to directly contact the electronic components on the board for inspection, is a flagship product developed by Takaya ahead of the world. This device enables the quick detection of various defects that occur during manufacturing. Additionally, it allows for rapid adaptation to a wide range of boards through program changes. It has established an indispensable and solid position in modern manufacturing, which is characterized by small-batch production of diverse products.

• Circuit Board Inspection Equipment

Supporting cutting-edge technology in the digital network era, responding to industry-specific needs with "high quality," "short delivery times," and "low costs."

The advancements in technology in the field of communication imaging show no signs of stopping. The new digital network market is rapidly expanding, and there is a demand for technological capabilities and production systems that can supply cutting-edge products in a timely manner. In response to the needs of this era and the industry, the EMS (Electronics Manufacturing Service) Business Division is responsible for designing and manufacturing based on customer contracts. We cater to a wide range of needs, from simple assembly-type EMS through component supply to integrated EMS that encompasses all processes from development and design to final product production, as well as small-lot production of various types and mass production of small models. By bringing together the "wisdom," "skills," and "experience" of Takaya's engineers and flexibly combining them, we provide EMS solutions that address various challenges.

• EMS

RFID technology enhances the value of diverse business models even further. It is active across a wide range of industrial fields, from security to factory automation and logistics.

The core business of the RF Division is the development, manufacturing, and sales of products that use radio frequency. Since 1996, we have developed various products including radio wave-based store security gates, 2.45GHz RFID readers/writers, and 13.56MHz RFID readers/writers, with Takaya products actively used across a wide range of industries from security to factory automation and logistics. We not only offer our own planned products but also provide OEM/ODM supply, contract development, EMS services, and system solutions, contributing to the creation of added value in diverse business models.

• IC tag

Providing custom security solutions for various industries and businesses. One-stop support from infrastructure assistance to software development.

The core business of the Solutions Division is IT services for enterprises. By effectively utilizing the experience, know-how, and personnel that the Takaya Group has cultivated through various system developments, along with the latest IT technologies, we provide optimal solutions to the IT challenges faced by our customers. For example, our highly skilled system engineers respond to the diverse needs of customers with systems such as RFID process management systems, attendance management systems, access control systems, warehouse management systems, and parts management systems. Utilizing advanced research, analysis, and design capabilities, we propose and build optimal systems ranging from infrastructure support such as server implementation and network construction to software development, maintenance, and operation, providing one-stop IT solutions.

• Process Control System

Four business fields that create synergy

Takaya accurately responds to diverse needs from various industries and production sites with its "manufacturing power." The synergy of experience and achievements in four business fields, along with technology and people, generates further growth potential. 【Industrial Equipment Business】 - Development and manufacturing of in-circuit testers (flying probe testers) - Global sales and service network - Flying probe testers hold the world's top market share - Printed circuit board inspection technology - Over 30 years of sales experience 【EMS Business】 - Design, procurement, production, and contract services - Mass production design technology services - Proposals for wireless module utilization - Suggestions for optimal production locations (Japan, China, Thailand) - Abundant experience and achievements 【RF Business】 - Development, manufacturing, and sales of HF band RFID reader/writers - Manufacturing, development, and sales of store security products - OEM contract for wireless application products - RF circuit and antenna design technology - Certification of radio wave standards in various countries 【IT Solutions Business】 - IT consulting services - Contract development services - RF solution services - System support services - Software product sales

• Circuit Board Inspection Equipment

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.