ADLINK Japan will exhibit at the "12th IoT Solution Expo [Spring]" held at Tokyo Big Sight from April 5 (Wednesday) to April 7 (Friday), 2023!

A compact and robust intelligent AMR that optimizes the efficiency of intralogistics.

【Sturdy and Compact】 • Maximum speed of 1.5 m/s with a full load of 250 kg • 70 minutes of charging for 8 hours of full load runtime • Achieves optimal space utilization, including navigation in aisles 80 cm wide 【Compatibility with Top Modules】 • Built-in mounting points to stabilize top modules and payloads • Safe operation on uneven floors due to robust chassis and suspension • Conveyor and lift modules are pre-certified 【Rapid Deployment】 • Plug and play deployment possible within one hour • Quick recording of task point coordinates • Built-in robot management tools enable rapid parameter settings for task and layout adaptability

• Industrial PCs

Intel Arc GPU equipped MXM 3.1 Type A

ADLINK's MXM-AXe offers up to 8 hardware ray tracing cores, 128 execution units, 4GB GDDR6, and a maximum TGP of 50W with 8x PCIe Gen4. It provides a 50W TGP and the industry's first full AV1 hardware encoding. This module, which significantly enhances graphics rendering, is key to adapting to next-generation graphics workloads. The MXM-AXe leverages Intel's established graphics ecosystem, which edge developers have enjoyed and trusted for years, including OpenVINO for AI and Intel OneAPI management tools. Rather than a new lineup of GPUs, it is designed to seamlessly transition from integrated graphics to discrete graphics as before. Supporting Intel Deep Link technology, the MXM AXe, when combined with 12th and 13th generation Intel Core processors, achieves even higher performance and power efficiency through automatic workload allocation between integrated GPU, discrete GPU, and CPU.

• Embedded Board Computers

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube