Behind Ultra-Precision Machining [Factory Equipment Disclosure] You Corporation Co., Ltd.

Achieve high-precision machining with high accuracy, high rigidity, and vibration-damping mechanisms! Capable of machining not only aluminum and stainless steel but also difficult-to-cut materials.

At You Corporation, we use the 5-axis machining center HERMLE, made in Germany, to process difficult-to-cut materials. HERMLE is a 5-axis machining center that can handle single-piece production and is capable of high-speed machining, leveraging its high rigidity. Additionally, the frame is made of artificial stone and features a seamless monocoque structure, which achieves: 1. High rigidity, 2. Minimal temperature variation, and 3. Reduced vibration resonance, enabling high-precision machining. You can also trust us with the processing of difficult-to-cut materials such as titanium, Inconel, Kovar, and Super Invar, in addition to aluminum and stainless steel! 〇 Features of the 5-axis machining center HERMLE ■ Capable of handling single-piece production ⇒ High-speed machining is possible by utilizing its high rigidity ■ High rigidity secured by the artificial stone monocoque frame ⇒ Enables high-precision machining *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

Machining of aluminum in general: A5052, A5056, A6061, A6063, A2017, A7075. Abundant 5-axis machining and composite lathes.

At You Corporation, we not only provide cutting processing for various aluminum materials such as A5052, A5056, A6061, A6063, A2017, and A7075, but we also offer machining and lathe processing for copper, stainless steel, and difficult-to-machine metals like titanium, Inconel, Kovar, and Super Invar, utilizing our experienced technicians and high-precision machines. Additionally, we are equipped with numerous 5-axis machining centers and multi-tasking lathes, allowing us to handle multi-faceted shapes, complex geometries, and curved shapes with high precision and speed! We also process a wide range of resins, including ABS, POM, and PC, all within our own factory. With approximately 100 machining machines at our disposal, we can flexibly accommodate urgent and short delivery projects. We are also capable of processing super engineering plastics such as PPS, PEEK, and PTFE. High-precision processing is achieved in a temperature-controlled and well-maintained environment. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (contact form) below.

• Processing Contract

The technology is also adopted in essential components of aircraft and artificial satellites. With high-spec machinery and experienced technology, we provide MIL-spec quality.

Our company specializes in high-precision cutting processing utilizing high-spec machinery and factory environments, along with processing techniques cultivated over many years. We can handle a variety of difficult-to-cut materials, including not only resins and common metals but also titanium, molybdenum, tantalum, tungsten, nickel, and cobalt. By engaging in a wide range of fields, including aerospace, medical devices, and optical equipment, from research and development prototypes to the processing of small quantities of diverse products, we create new manufacturing through our refined processing and measurement technologies. ★Features ■ Over 100 machines capable of short delivery times and small-lot, diverse production ■ Equipped with constant temperature and vibration-proof environments suitable for precision processing and measurement ■ Manufacture of critical core parts for HTVs and artificial satellites, such as thruster injectors ■ Proven track record in the production of oxygen-free copper linear collider "acceleration tubes" on a micron order ■ Achievements in thin-walled processing of 0.01mm and drilling φ0.3mm through holes in φ0.5mm mechanical pencil leads #AccelerationTube #ThrusterInjector *For more details, please refer to the PDF materials or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

Super engineering plastics, as well as high-purity metal materials, rare metals, and composite materials, are being explored for fine holes, grooves, and high-precision processing.

The TEC Division of U Corporation, which started with resin mold-less processing, has gained recognition from customers by creating free shapes even for complex geometries that cannot be clamped. For key parts that are essential for perfecting equipment and product performance, we realize our customers' creativity into tangible forms. ★Sample of mirror tube parts ○External cam multi-surface machining, cylindrical machining with a compound lathe, thin-walled processing ○Machining equipment: compound lathe, 5-axis machining center ○Material: Aluminum A5056 Our company is engaged in research and development prototypes to small-lot production across a wide range of fields, including medical devices, aerospace, optics, electronics, and office automation. We produce high-precision, high-quality items daily, such as oxygen-free copper "accelerator tubes" on the micron order and "thruster injectors" used in satellites. #AcceleratorTube #ThrusterInjector *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (contact form) below.

• Contract manufacturing

Achieving high precision through continuous unmanned processing! Leave precision 5-axis machining of difficult-to-cut materials, aluminum, and stainless steel to us!

At You Corporation, we use the 5-axis machining center 'PX30i' manufactured by Yasuda Seiki to process medium-volume products with high precision. The 'PX30i' is a 5-axis machining center capable of long hours of unmanned operation. It has 33 pallets, allowing for program settings for each pallet. Additionally, by using the built-in tools, we can accommodate urgent projects, which enables a reduction in setup time. 【Features of the 5-axis Machining Center 'PX30i'】 ■ 33 pallets available ⇒ Program settings can be made for each pallet ■ Capable of long hours of unmanned operation ■ Can store up to 323 tools ■ Used for prototyping to medium-volume production, allowing for reduced setup time ■ Can accommodate urgent projects using built-in tools ⇒ Enables a reduction in setup time *Main materials handled: Aluminum, stainless steel, difficult-to-cut materials, etc. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

High rigidity ATC type composite processing machine for integrated MC machining + turning processing in one unit - for aluminum, stainless steel, and difficult-to-machine materials.

At You Corporation, we own the NC composite lathe 'NTRX-300', which can complete both MC processing and turning processing with a single machine. Thanks to the automatic chucking feature, it can operate in a semi-unmanned mode, accommodating from single pieces to medium production runs. Additionally, it allows for a reduction in setup time for jig manufacturing, enabling process consolidation. 【Features of the NC Composite Lathe 'NTRX-300'】 ■ High rigidity mechanism enables high-precision processing ■ Accommodates from single pieces to medium production runs ⇒ Semi-unmanned operation is possible due to the automatic chucking feature (Maximum material stock of 13 pieces) ■ Cost reduction through setup time reduction *Main compatible materials: Aluminum, stainless steel, difficult-to-cut materials, etc. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

There is a proven track record of drilling through holes in sharp leads (Φ0.5)! By devising a method to secure the workpiece, we can achieve strict precision! *Aluminum, stainless steel, etc.

At You Corporation, we handle small diameter and deep hole machining. Small diameter holes are more prone to breakage due to the thinness of the cutting tools, but our company addresses this with the technology and experience we have cultivated over many years. Additionally, we tackle the challenge of "difficulty in achieving coaxiality due to tool deflection in long holes" by innovating the workpiece fixation method, allowing us to meet stringent precision requirements. You can also trust us with machining difficult materials such as aluminum, stainless steel, titanium, Inconel, Kovar, and Super Invar. We are also capable of resin cutting for materials like ABS, PC, and POM at our own factory! 【Features】 ■ Proven track record of drilling through holes in sharp cores (Φ0.5) ■ Addressed with technology and experience cultivated over many years ■ Achieving strict precision by innovating workpiece fixation methods ■ Capable of machining difficult materials #SmallDiameter #DeepHoleMachining #SmallDiameterHoles #LongHoles #CuttingTools #Deflection #Coaxiality #Aluminum #StainlessSteel #Titanium #Inconel #Kovar #SuperInvar #ABS #PC #POM *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

Processing achievements with a precision/tolerance of 0.001mm! From aluminum and stainless steel to titanium, Inconel, and other difficult-to-machine materials.

At You Corporation, we reproduce machining of difficult materials such as aluminum, stainless steel, titanium, Inconel, Kovar, and Super Invar with abundant know-how and high-precision machines!! We also handle all resin processing in our own factory. High-precision machining is achieved in a temperature-controlled processing environment. Additionally, we support the foundation with a 1m concrete base and over 100 piles, employing "cutting edges" in the foundation to minimize the impact of vibrations. ★Features ■ Machining precision: We have machining records with tolerances in the range of 0.001mm. ■ Temperature is set to "Summer: 24℃±0.5℃ / Winter: 20℃±0.5℃" to minimize the impact on machining machines and materials. ■ High-precision machining is achieved in an environment that excels in both seismic resistance and vibration isolation. ■ The factory is located 150m away from the roadway, ensuring that even minute vibrations are not picked up. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out via the related link (contact form) below.

• Processing Contract

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.