Processing and assembly processes, compatible with PCB and SMT processes! "Factory Quality Audit Check Sheet" set of 3 items, basic contract set for overseas transactions (3 items), new product launch cooperation factory production outsourcing manual.

Perfect! Set of 3 Quality Audit Check Sheets for Partner Factories, Set of 3 Basic Contracts for Overseas Transactions, Manual for Production Commissioning at Partner Factories for New Product Launch.

■Quality Audit Checklist (Template) 3-Point Set 　＜http://factorysupport-takasaki.com/article/428610937.html＞ 1. Factory Audit Checklist 　Audit of the overall QCD status of the supplier factory (130 items) 2. System Audit (QMS Audit) Checklist 　Audit of the quality management system in accordance with ISO 9000 (19 items) 3. Process Audit Checklist 　Audit of the manufacturing process in accordance with ISO 9000 (280 items) 　Items can be added or removed for each process as needed. ■Template for Basic Transaction Agreement with Overseas Partner Factories (3-Point Set) 　＜http://factorysupport-takasaki.com/article/415805936.html＞ 1. Basic Transaction Agreement with Partner Companies 2. Quality Assurance Agreement 3. Non-Disclosure Agreement ■New Product Launch and Production Commissioning Manual for Partner Factories 　＜http://factorysupport-takasaki.com/article/440159919.html＞ 1. New Product Launch Plan 2. Consideration of Production Methods 3. Process Design and Validity Confirmation 4. Examples of Troubles During Production Launch

• Management consultant/Small business consultant
• others

We can design and manufacture plastic molds, as well as import plastic molded products from local manufacturers in China.

Simple molds are designed for small lot production, typically producing 100 to 500 sample products for prototype evaluation and around 10,000 units for mass production, without being taken outside the company (for sale). Due to their nature, these molds aim to minimize costs while achieving short lead times and high quality. Therefore, communication is conducted through local staff with capable Chinese manufacturers. Customer support for Japanese clients is handled by Japanese staff at the Japanese office, ensuring peace of mind. Additionally, quality control for the molds is optimized based on the type of parts: 1. Exterior and design parts: Focus on appearance, mirror finish on design surfaces, and thorough prevention of warping, sink marks, weld lines, and short shots through flow analysis. 2. Mechanical and movable parts: Emphasis on dimensional accuracy, conducting strength and durability tests, guaranteeing a tolerance of ±1/100, and verifying actual assembly with prototype samples. 3. Other special purpose parts: Implementing secondary processing such as insert molding, two-color molding, ultrasonic welding of parts, painting, and printing, along with conducting tests for peelability, corrosion resistance, and weather resistance.

• Mold Design

Leave high-difficulty finishes such as piano black and pearl coating to us.

We provide technical support for high-difficulty painting of resin and metal products, from prototyping to mass production, responding to various requests regarding painting. The photo shows the painting of IBM (LENOVO) laptops, specifically the ThinkPad series. We can accommodate small lot orders. We offer urethane and UV painting, and we perform painting for design surfaces in automotive, medical, and robotics applications. We can undertake a consistent process from mold making to forming and secondary processing. Additionally, we conduct various evaluation tests based on JIS standards, including printing and ultrasonic welding. We accommodate small lot orders. Types of evaluation tests: 1. Light resistance test - applicable to automotive and robotics painting 2. Acid and alkali resistance tests 3. Abrasion resistance test 4. Temperature and humidity tests, etc. Related URL: https://swifttechnoligy.seesaa.net/

• Interior parts
• Other painting machines
• Prototype Services

We provide a comprehensive process for design and manufacturing of plastic molds, parts processing, glossy painting, and quality assurance at ultra-low prices, along with technical support.

Leveraging our extensive experience in manufacturing, we provide total support from high-level mold and processed parts production to quality assurance by a team of professionals in the field. ■ Technical and manufacturing support in plastic mold design We design and manufacture prototype molds and low-volume production molds with the simplest structure necessary. (Mold specialist factories in Japan, China, the Philippines, and Vietnam) ■ Precision aluminum material cutting and processing, sheet metal processing, stainless steel material cutting We can process from ultra-precision machining of small lot items at the micron level to mass production machining of general quality, categorized by level. ■ Resin coating, metal coating, glossy coating We accept technical support for high-difficulty coatings such as piano black mirror finish and pearl white, from prototypes to mass production. (Specialized coating factories in Japan) ■ Reliable overseas parts quality assurance We can convey customer requests without omission through the information route: customer ⇒ our Japan office ⇒ overseas staff (Japanese-speaking) ⇒ local manufacturers. Additionally, remote meetings can be held for direct communication between our Japan office and local manufacturer technicians. Furthermore, we deliver processed products through the route: local manufacturer ⇒ Japan office ⇒ customer. Defective products will never reach the customer directly from the local site.

• Plastic Mould

In civil engineering sites, in addition to construction feasibility and safety, material selection that takes environmental considerations into account is required. Materials used for temporary roads, access roads, heavy machinery work yards, and material storage areas are now focusing not only on traditional steel plates but also on materials that can contribute to reducing environmental impact. Hyper CLT sheets are civil engineering CLT materials made from wooden CLT. Because they utilize wood, they are characterized by their ability to easily connect to proposals that consider site environments, such as CO2 fixation, glare reduction, and noise reduction. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle even with small machinery, thus helping to reduce the burden of transportation, installation, and removal. Furthermore, they can be used in a wide range of applications as an alternative to steel plates for measures against muddy conditions, ground protection, and ensuring work pathways. In public works, they are also easy to propose as materials that demonstrate the adoption of environmentally friendly materials and ingenuity during construction, which can lead to improved site evaluations. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they can also be utilized as materials for proposals on creativity and environmental measures in public works. We recommend them as a new alternative to steel plates for companies considering environmental considerations, NETIS, civil engineering utilization, and civil engineering CLT. Please feel free to consult us.

Hello everyone! We are Nikken Coating Industry Co., Ltd., a specialized manufacturer of contract processing for fluororesin coatings and PEEK coatings. Thank you very much for visiting our booth at the recent "Mechanical Elements Technology Exhibition." Thanks to you, we were able to conclude the event successfully. At the exhibition, we proposed surface treatment solutions for the "five challenges (release, sliding, corrosion resistance, impurity measures, and environmental response)" that arise in manufacturing sites. Were there any technologies that caught your interest? ■ We are currently responding to inquiries made at the venue We are sequentially contacting those who made technical inquiries or requests for prototypes at our booth on the day of the event. If you have requests such as "I would like you to look at additional drawings" or "I need a quote urgently," please feel free to let us know. ■ For those who could not attend the exhibition or missed our booth We also welcome inquiries from customers who could not come to the venue, such as "coating for special shapes that other companies have declined" or "switching from existing coatings." If you have any concerns regarding "surfaces," please feel free to consult or contact us.

The particle visualization technology developed under our brand "ViEST" has a very high level of detection sensitivity that allows for real-time visualization of the suspended and adhered states of micro and nano-sized particles. We are engaged in the sale of visualization systems and contract services for evaluation (investigating particles and airflow in production processes, manufacturing equipment, and factory environments, evaluating the performance of cleaning products, proposing yield improvement measures, etc.) both domestically and internationally. In manufacturing environments, invisible fine foreign substances, dust generation, particle adhesion due to static electricity, and airflow disturbances can lead to quality defects and reduced yield. Our company clarifies these contamination factors through visualization technology and provides consistent support from identifying the source of the problem to considering and confirming improvement measures. Do you have any of the following concerns? - Unable to identify the cause of foreign matter contamination - Want to check airflow and cleanliness in clean rooms - Want to understand dust generation from manufacturing equipment and transport systems - Want to reduce particle adhesion to films and substrates - Want to improve contamination that causes yield reduction

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.