A wide range from 0.00243 candela to 99,999 candela can be easily measured. A palm-sized luminance meter that can be used anywhere. External communication is also possible. - New release: LV Checker LC-5T

Approximates sunlight daylight white using a xenon light source and constantly monitors brightness for stability.

This device is a diffuse light source for the adjustment and inspection of various sensors such as cameras, CCDs, and exposure meters. The brightness value can be set freely over a wide range via a numeric keypad input and is displayed. By adopting a light quantity servo system with variable aperture, it maintains good brightness stability over long periods, and brightness management and changes are easily achievable. Brightness can be selected in an arbitrary selection method (LV4.0 to 16.0, with a 0.001 LV pitch), a pitch variable method that allows for adjustment at any pitch (0.1 LV to 1.0 LV), and a memory selection method that can store and recall 99 arbitrary brightness levels. External control via RS-232C and other interfaces is possible. We also handle custom orders for special specifications, so please consult us.

• Other optical parts
• Other measurement, recording and measuring instruments
• Lighting for image processing

Introducing the standard and distribution types of the (light meter) strobe tester!

Tsubosaka Electric Co., Ltd. offers a "strobe light meter" for measuring light distribution and other parameters. Our lineup includes the strobe light meter "LX-25," which excels in short bursts of light, the "LX-60," suitable for observing multi-light waveforms, and the "STB-209XL2," which can also measure emission time and illuminance. Each product comes with additional features. 【Features】 ＜LX-25＞ ■ Integral waveform analysis method ■ Capable of measuring special emissions based on settings ＜LX-60＞ ■ Multi-emission and continuous emission measurements made easy with sampling waveform analysis method ■ Emission waveforms can be analyzed with the included PC software *For more details, please refer to the PDF document or feel free to contact us.

• Microscope
• Optical Measuring Instruments
• Image Processing Equipment

"Please watch the video of the operation" Measurement of weak to high brightness from phosphor emission - Luminance meter for diffuse surface light sources.

This device is a luminance meter primarily used to measure the brightness of diffusion surfaces. Measurements are taken by placing the light-receiving part on the surface to be measured. As a standard model, the delivery time is within one week. It improves work efficiency with a backlight display and measurement result hold function. It also supports external communication and data output (USB compliant). Additionally, it can be powered by batteries (two AA batteries) for portability or an AC adapter. It is a compact and lightweight measuring instrument weighing approximately 300 grams. It can be used with our luminance box for self-calibration. Furthermore, it has a function to correct differences from other companies' luminance meters.

• Other measurement, recording and measuring instruments
• Lighting for image processing

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

We will be exhibiting jointly with Ando Corporation at the "22nd Pipe and Equipment Comprehensive Exhibition 2025 OSAKA," which will be held for three days from September 11 (Thursday) to September 13 (Saturday), 2025, at Intex Osaka, Hall 6A. Please be sure to stop by when you visit. 【Exhibition Schedule】 ● Environmentally friendly heat exchanger "Heat Recovery Heat Exchanger" ● Cut model of "Stainless Steel High Efficiency Heat Exchanger" ● Skeleton model of heating and cooling heat exchanger "SK Water Coil" ● Cooling heat exchanger "SK Water Coil Cartridge Type" ● Radiant heating pipe for space heating "SK Aerofin Tube" ◆ Event Dates: September 11 (Thursday) to September 13 (Saturday), 2025 10:00 AM to 5:00 PM (until 3:00 PM on the last day) ◆ Venue: Intex Osaka, Hall 6A Address: 1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture, 559-0034 Access: https://www.intex-osaka.com/jp/access/ ◆ Booth Number: 112 ◆ Admission Method: Pre-registration required (free) *Please check the official website for details.