I started a YouTube channel called "I'm Glad I Built This House"!

Kind to people and the Earth! OM Solar harnesses the blessings of nature to create a comfortable living.

The "OM Quattro Solar" is a system that utilizes the heat and light of the sun to not only provide heating and hot water for your home but also generate electricity. By taking advantage of the property that solar panels emit heat during electricity generation, the system can recover this heat for use in heating and hot water production. This heat utilization can help mitigate the decrease in power generation efficiency caused by the increase in temperature of the solar panels during operation. The solar panels use high-efficiency monocrystalline silicon. 【Features】 ■ Generates heat and electricity simultaneously ■ Touch panel remote control ■ Allows monitoring of temperature and power generation via the internet *For more details, please refer to the catalog or feel free to contact us.

• Solar power generator

Living by harnessing the blessings of nature! A solar thermal floor heating system that supports a comfortable lifestyle.

"OM Solar" is a solar thermal floor heating system designed in accordance with the laws of nature. During the cold winter, it utilizes solar heat for floor heating to create a comfortable thermal environment, and from spring to autumn, it generates hot water using solar heat. In summer, it expels warm air from the roof through the attic, and at night, it takes in cooled air by utilizing radiative cooling. This system helps create a comfortable living environment by integrating comprehensive ideas such as residential design, the way people perceive warmth, thermal environment design, air quality, living flow, and garden creation. 【Features】 ■ Purifies air while simultaneously providing floor heating and ventilation ■ Heats the entire indoor space with floor heating until the next morning ■ Produces approximately 300 liters of hot water per day ■ Introduces cooled air into the room through radiative cooling ■ Controlled by a touch panel remote *For more details, please refer to the catalog or feel free to contact us.

• Other air conditioning equipment
• Solar power generator

Installation is in one location in the attic! Electronic whole-house air purification unit exclusively for OMX/Passiv Aircon.

The "OM e FILTER" is a built-in air purifier specifically designed for the whole-house air conditioning system "OMX" and "Passiv Aircon." It utilizes a "whole-house air conditioning system" that maintains the thermal environment of the entire home 24 hours a day with just one unit, using "duct pathways." It cleans the air throughout the house, capturing everything from mold, pollen, to PM2.5, ensuring "clean air." It also does not miss dust in corners of rooms or in hallways without equipment. 【Features】 ■ Installation in one location in the attic ■ Only one filter to maintain for the entire unit ■ Captures dust effectively ■ Dust collection power adopted by medical institutions ■ Airflow remains almost unchanged, and costs are reasonable *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and Exhaust

Reducing "heat loss" through ventilation! Introduction of the Passiv Aircon dedicated total heat exchange ventilation system.

"PAtH" is a total heat exchange ventilation system that upgrades Passiv Aircon homes. By bringing in outside air closer to room temperature, it reduces "heat loss" due to ventilation. It ventilates while adjusting humidity to combat winter dryness and summer or rainy season humidity indoors. Additionally, it utilizes the ducts of Passiv Aircon, eliminating the need for double piping and allowing for a neat installation. 【Features】 ■ Reduces "heat loss" due to ventilation ■ Adjusts humidity while ventilating to combat winter dryness and summer or rainy season humidity ■ Utilizes Passiv Aircon ducts ■ No need for double piping, allowing for a neat installation ■ Total heat exchange efficiency for temperature and humidity is 80% *For more details, please refer to the PDF document or feel free to contact us.

• Ventilation and Exhaust

Recommended for construction companies! Heating, cooling, hot water supply, and heat exchange ventilation all in one unit! Providing a customized thermal environment for each individual resident!

"OMX" is an indoor, outdoor, and hot water storage unit that includes functions for heating, cooling, hot water supply, and heat exchange ventilation, achieving an energy-efficient and comfortable thermal environment throughout the year. The hybrid system of solar energy (solar heat) and heat pumps reduces the initial installation costs for a warm winter and cool summer lifestyle, while also minimizing maintenance costs with minimal electricity. It controls temperature changes that are favorable for living, providing a customized temperature environment for each resident, contributing to health and comfort. It also operates automatically in various modes depending on the season, weather, and time. [Main Automatic Operations] ■ Heating using solar heat ■ Heating utilizing heat pumps ■ Heat pump cooling and waste heat utilization for hot water supply ■ Only heat exchange ventilation *For more details, please refer to the PDF materials or feel free to contact us.

• Other environmental equipment
• air conditioning

In winter, heating is provided from under the floor, and in summer, cooling is provided from the ceiling, maintaining a comfortable indoor thermal environment year-round! Whole-house air conditioning and floor heating with a single air conditioner!

The "Passive Air Conditioner" is an air conditioning system that creates a comfortable thermal environment without being troubled by unpleasant drafts or indoor temperature differences. Installed in the attic of a house that incorporates elements of passive design, it maintains a comfortable indoor thermal environment year-round by providing heating from the floor in winter and cooling from the ceiling in summer through ducting. By planning the architecture and air conditioning equipment as a cohesive unit, both indoor and outdoor spaces are neatly integrated, and the hassle of daily maintenance is reduced to just one unit. This leads to a simpler and more comfortable lifestyle. 【Features】 ■ Insulation ■ Sunlight shading ■ Daylight utilization ■ Utilization of solar heat and natural wind ■ 24-hour operation to reduce temperature differences * For more details, please download the PDF or feel free to contact us.

• air conditioning
• Solar power generator

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.