Introduction to materials summarizing methods to improve storage efficiency!

Increase storage capacity without sacrificing space by choosing the right shelving! Recommended for sites that feel underutilized.

Flat loss refers to the loss of storage space that arises from taking up too much aisle width in relation to the size of a factory or warehouse. It is believed to be caused by improper placement of items such as shelves and products, or mistakes in the selection of handling equipment. 【Example】 In such cases, there may be flat loss... - Storing products with different shipping frequencies on the same shelf - Not being able to install racks suitable for the stored items, resulting in dead space - Feeling that the aisle width is unnecessarily wide Here are three solutions to address these issues! ■ Shuttle Runner - Automatically transports pallets between shelves, saving fork aisle space and converting it into storage space - Can also reduce the workload of fork operators ■ Roller Through Rack - Stores pallets by flowing them down inclined lanes, saving fork aisle space - Maximizes limited storage space without power ■ Drive-In Rack - Utilizes wide pallets to make 80% of the warehouse usable as storage area - Reduces aisle space and increases storage capacity! For more details, please download the catalogs or the document titled "【Reviewing Storage Space!】 Three Losses and Improvement Measures in Storage Shelves."

• Food storage equipment and facilities
• palette
• tank

Utilize the unused "upper space" to double the storage rate of the warehouse! How can we improve height loss with existing rack extensions and high-rise picking carts?

Height loss refers to the loss that occurs when the vertical space, such as the upper part of a warehouse, is not utilized effectively. Do you have any of the following concerns in warehouse management? ● Increased storage items leading to insufficient space ● High costs for replacing racks to improve storage rates ● Worrying that utilizing upper space may reduce picking efficiency ● Few qualified personnel for high-level picking These issues can be resolved with JALOC's "TanaTSumU" and "High Pick Runner." ■ TanaTSumU A system that allows for the addition of racks above existing medium-duty racks, transforming them into high-rise racks. ■ High Pick Runner A cart that can rise 3.2 meters while carrying a person, allowing for direct picking of items placed on high-rise racks up to about 5 meters. By using TanaTSumU and High Pick Runner together, you can fully utilize the upper space of the warehouse, enhance storage efficiency, and ensure smooth picking operations. For more details, please download the catalog or contact us.

• rack
• Other work tools
• tank

Would you like to reconsider your storage shelves and make effective use of space? We propose efficient operations by reducing waste with our uniquely designed racks!

"Yamakake loss" refers to a situation where there are empty spaces between stored items and shelves, indicating that space is not being utilized effectively. Example: There are gaps between the shelves and stored items, or long items are placed horizontally. ↓ Here are 3 recommended products to eliminate yamakake loss ↓ ■ Pallet Rack - Designed to specifications that match the stored items, eliminating unnecessary space. - Load capacity per shelf ranges from 500 kg to 3000 kg. ■ J Shelf - A medium-lightweight rack using "light" and "rust-resistant" plastic shelves. - Easily change shelf heights and layouts by using plastic boards for shelves and dividers. - Combining with a name curtain (https://mono.ipros.com/product/detail/2000364292) makes location changes easy. ■ Carton Box - Can be made in any shape to match product dimensions or modular dimensions. - Reduces wasted space by using it as a substitute for dividers. For more details, please refer to the document "【Reviewing Storage Space!】 Three Types of Losses Occurring in Storage Shelves and Improvement Measures," which you can download. Please consider this for improving storage capacity and reducing space loss.

• rack
• tank
• Storage

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.