Introducing the Fast Corporation Screw Extruder Type EMJ3-P.

One machine for clamping and hot melt molding! It is used in fields such as automotive parts and electronic components.

The hot melt molding system is a molding device that integrates a clamping workstation and a hot melt applicator. Due to its integrated design, it allows for centralized management of temperature data and molding conditions. Our company is equipped to provide comprehensive support from adhesive selection to prototype mold production, molding tests, equipment, and maintenance after delivery, covering both resin and equipment aspects. We will resolve your concerns based on your inquiries, so please feel free to consult with us. 【Features of Low-Pressure Molding】 ■ Reduces damage to parts compared to injection molding ■ Allows molding tailored to the shape of the substrate ■ Adopted in fields such as automotive parts and electronic components For more details, please download the PDF or feel free to contact us.

• Printed Circuit Board
• Other Connectors
• Electrical equipment parts

Small Piston Gear Pump Hot Melt Applicator

Compact applicator with simple and easy operability and low cost. 【Features】 ○ Two types of discharge methods The gear pump is equipped with a pressure relief valve for smooth resin delivery, with a maximum pumping capacity of 6 kg/hour. Pressure adjustment can be easily performed from outside the device. ○ Temperature control is possible from 40°C to 200°C (±0.5%). *Optional up to 230°C. ○ Tank section The B4 tank has a large surface area and features melting-promoting fins at the bottom, allowing for optimal melting rates. ○ External electrical input In addition to the motor start/stop switch, the B4 gear pump allows for external electrical input for the pump and motor from the master unit. ● For other functions and details, please download the catalog.

• Interior parts
• Other processing machines
• Other physicochemical equipment

Small to medium-sized piston pump achieves 40% power consumption reduction (compared to our company) with an easy-to-maintain hot melt coating device.

A new series that enables significant electricity cost savings with cutting-edge design and technology: "Hot Melt Applicator New Model MICRON" The applicator of the conventional MICRON series has undergone a model change. Compared to before, we have successfully reduced power consumption significantly (compared to our previous model -40%). ○ Energy Efficiency By lengthening and thickening the fins that promote melting, we have increased the surface area inside the tank and achieved uniform heating within the tank. Additionally, by enhancing the insulation effect around the tank, we have shortened the time to reach the set temperature, thereby reducing the energy required to maintain the temperature during operation. ○ Usability To make operation easier, we have adopted a simple control panel. The tank lid cover opens wide, making it easy to refill adhesive and clean. The control panel slides with a 1/4 turn of a screw, allowing for easy access during maintenance. ● For other functions and details, please download the catalog.

• Interior parts
• Other packaging machines
• glue

Medium-sized gear pump large-capacity hot melt applicator

Practical Layout High-Capacity Applicator 【Features】 ○ Large gear pump type with tank capacities of 50L/120L/200L ○ Choose from three types of gear pump sizes and outlet positions ・MACRO50 　　 　Tank capacity: 50L 　　 　Dissolution capacity: 50Kg 　　 　 ・MACRO120 　　 　Tank capacity: 120L 　　 　Dissolution capacity: 120Kg 　　 　 ・MACRO200 　　 　Tank capacity: 200L 　　 　Dissolution capacity: 200Kg ● For other functions and details, please download the catalog.

• Other processing machines
• Assembly Machine
• glue

[Small] Customizable Hot Melt Applicator

A multi-applicator that leverages the strengths of our original products, featuring customization, excellent discharge accuracy, operability, and maintainability. 【Features】 ○ Developed for thermally conductive hot melts and high-viscosity hot melts. ○ Compatible with all types of hot melts. ○ Easy maintenance makes it ideal for prototype and experimental machines. ○ Expandable control panel. ○ Supports high-viscosity and low-flow hot melts. ○ Compatible with reactive hot melts. ○ Systematization with pre-melters enables a wide range of applications. ○ Custom design and manufacturing available upon request. ○ Multifunctional control panel. ● For other functions and details, please contact us.

• Interior parts
• Assembly Machine
• glue

Perfect for prototypes! Usable up to 250℃, a hot melt glue gun that doesn't compromise on shape or properties! The resin won't stick!

A handgun-type applicator that can melt all hot melts at a maximum temperature of 250℃! The tank opening and interior are Teflon-coated to prevent resin degradation and carbonization, ensuring that the resin does not stick. 【Features】 ○ Ideal for simple sample production and small lot processing ○ The tank opening and interior are Teflon-coated to prevent resin degradation and carbonization ○ One-touch opening and closing with a grip clamp for easy resin loading ○ The regulator section includes a relief valve that automatically releases pressure for safety when pressure exceeds the rated limit ○ The tank lid has a safety lever to securely lock the lid *For more details, please download the catalog or contact us directly.

• Electrical equipment parts
• Other processing machines
• Other packaging machines

Hot melt roll coater

A high-performance hot melt roll coater that incorporates know-how cultivated through years of hot melt coating on optical discs. 【Features】 ○ Short warm-up time ○ Versatile operability through the combination of operation panel and mechanical switches ○ Stability and reproducibility of coating amount achieved through innovative ideas ○ Compatible with high-viscosity resins ○ Various coatings possible according to the substrate You can prototype with a test machine that supports a maximum coating width of 1000mm in the fast lab room! ● For other functions and details, please contact us.

• Interior parts
• Other processing machines
• glue

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.