[Exhibition] 9/20 to 9/22 "INCHEM TOKYO 2023" Exhibition Information

Fuji Kin's technological capabilities support the unknown high-pressure areas required for hydrogen stations.

This is a valve for hydrogen gas and liquid hydrogen. ■ Ultra-high pressure hydrogen gas compatible valve equipment A lineup of valve equipment for the near-future hydrogen society! - Control valves, shut-off valves, needle valves - Check valves, filters - Metal gasket fittings, welded fittings, cone & thread fittings ■ Ultra-high pressure liquid hydrogen gas compatible valve equipment This product is essential equipment for hydrogen stations. Based on accumulated technology, we have developed valve equipment that incorporates new technology to meet the needs for improving the filling capacity of hydrogen stations. <Features> Durability: 99.9 MPa Cryogenic compatibility: -253 to +50℃ 【Approximately 50 times compared to conventional】 High flow rate: Cv value 1 【Approximately 10 times compared to conventional】 Valve size: Overall height of the valve is about 50% less than conventional.

• Hydrogen battery
• valve
• Pipe Fittings

<New V-Series> A 3-piece ball valve born from a new concept.

<Features> 1. 3-piece structure suitable for high flow rates 2. Can be opened and closed with a 1/4 turn of the handle 3. Connection types: V-Lok type, Rc, NPT male threads 4. Available in manual valve and automatic valve (single acting, double acting)

• valve

<New V-Series> A trunnion-type ball valve born from a new concept.

<Features> 1. Compact design that accommodates high flow rates. 2. Operable with low torque. 3. Flow patterns: 2-way type, 3-way type. 4. Can be panel-mounted.

• valve

<New V-Series> A plug valve born from a new concept.

<Features> 1. Simple and compact design. 2. Operable with low torque. 3. Full open and close operation with a 1/4 turn.

• valve

<New V-Series> A relief valve born from a new concept.

<Features> 1. Maximum operating pressure 41.3MPa 2. Can be set to the desired pressure using 8 types of springs. (Nominal diameter 6.35) 3. Can be set to the desired pressure using 3 types of springs. (Nominal diameter 12.7)

• valve

The <New V-Series> is a tube connector with excellent performance and quality.

<Features> The new V-Lok tube connector allows for connection simply by inserting the tube and tightening the nut, eliminating the need for special tools or open flames. Additionally, due to the unique interlocking action of the double ring, the ring effectively undergoes plastic deformation to compress the tube securely, resulting in very high pressure resistance.

• Pipe Fittings

It is a control valve suitable for precise flow control in various research facilities and process lines.

"Minyucon" is a pneumatic actuated control valve manufactured by Fujikin, bringing together the full force of its genuine manufacturing capabilities. Its precision in control and reliability in operation make it suitable for precise flow control in various research experiments and process lines. The Cv value can accommodate a wide range from 0.0000015 to 5. With the adoption of a positioner, it achieves precise control with hysteresis below 1.5%. The inner valve is made of SUS316 with Stellite overlay, providing excellent wear resistance. For more details, please contact us or refer to the catalog.

• valve

It is an electronic valve that combines precision in control, reliability in operation, and outstanding responsiveness.

<Features> 1. Precision Control By incorporating a potentiometer and providing feedback on valve opening, we achieve precision control with excellent reproducibility and hysteresis characteristics. 2. High-Speed Response with Special Proportional Solenoid Actuator Utilizing a special proportional solenoid, we achieve a high-speed response of less than 0.6 seconds from fully open to fully closed. (For normally open types, it is less than 0.8 seconds.) 3. Spring Back Structure With a spring back structure, the valve operates to the fully open or fully closed position even in emergencies. 4. Drive Unit By inputting a 4-20mA signal into the drive unit, the valve operates at the specified opening degree.

• valve

This is an electronic valve that achieves high-speed response, precise control, and high resolution (2000:1).

<Features> 1. By adopting a stepping motor actuator, a high resolution of 2000:1 is achieved. 2. The inner valve is made of SUS316 with Stellite overlay, providing excellent wear resistance. It also supports a wide range of Cv values from 5 to 0.0000015. 3. By inputting a 4-20mA signal into the dedicated drive unit, the valve operates at the specified opening. 4. The gland section uses a PTFE packing. 5. The body is made of stainless steel forging (SUSF316).

• valve

This is a flow control device that adopts a pressure control method for ultra-high purity applications.

A flow control system that enables high-precision flow control, which cannot be achieved with conventional mass flow controllers, by controlling pressure. 【Features】 ○ Simple and dead space-free structure ○ Excellent pressure fluctuation characteristics Since the output value does not fluctuate even when the upstream pressure varies, it can be installed on the upstream side. Additionally, it allows for the elimination of regulators from the gas system, achieving both cost reduction and miniaturization of the gas system. ○ Adoption of flow factor Compatible with various types of gases ○ Excellent accuracy ○ Equipped with flow self-diagnosis function ○ Quick response ○ Mount position free ○ Supports device network communication ● For other functions and details, please download the catalog.

• Flow Control

This is a flow control device that adopts a thermal flow sensor control method.

Achieved further total cost reduction and shortened lead time with a digital interface-equipped mass flow controller. 【Features】 ○ High precision Flow accuracy of ±1% ○ High-performance sensor Adoption of low-temperature flow sensors, achieving optimal structure for highly reactive gases and gases with low stability ○ High-reliability diaphragm valve with reduced gas contact area and prevention of particle generation Adoption of high-speed response piezo actuators Significant improvement in gas replacement characteristics due to dead space-free structure Minimal particle generation ○ Standard digital interface RS485 ○ RoHS compliant ● For other functions and details, please download the catalog.

• Flow Control

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube