We have developed a vacuum concentration device for foaming samples.

You can achieve solvent concentration simply by plugging it into an outlet.

It is characterized by the ability to directly set vials used for small-scale reactions and by being compact in size, at 1/10 of the conventional method, resulting in a portable concentration recovery device.

• Concentration Equipment
• Analytical Equipment and Devices
• others

Free design of the cooling section, no coolant required, direct cooling, -100°C in 15 minutes.

-100℃ Refrigerant-free Lightweight and compact Natural refrigerant used Free design of cooling section

• Thermostatic water bath
• Cooling system
• Chiller

I created something like this: a palm-sized rotary evaporator.

■ Operation remains unchanged from before ■ One-fourth the size of the previous version

• Concentration Equipment

It is well-received as an alternative to nitrogen spraying concentration, reduced pressure concentration, and centrifugal concentration. Existing concentration containers can be used, the concentration process is visible, and there is no atmospheric release of VOCs.

Usage examples: - CombiChem - Fraction Collector - Preparative Chromatography - Soxhlet Extraction

• Concentration Equipment

It is used for the recycling of troublesome solvents such as chloroform, THF, and fluorinated solvents.

■Features - Automation Complete automation of the supply and discharge of organic solvents - Safety Achieves solvent evaporation at low temperatures below the boiling point (atmospheric pressure to reduced pressure) No concerns about bumping, localized overheating, or peroxides (water bath heating) - Slim Resolves installation space issues with a width of 225mm (almost the width of A4 paper) - Easy operation Automatic operation with the power switch ON

• Distillation Apparatus
• Other environmental analysis equipment
• Hazardous material processing

Achieving zero emissions of organic solvents.

The organic solvent vapor from the exhaust of the vacuum pump is condensed through low-temperature cooling by a refrigeration unit, and any remaining trace amounts of solvent vapor are captured by activated carbon, thereby minimizing the atmospheric release of the solvent to the greatest extent possible.

• Other physicochemical equipment

Low-temperature trap for organic solvents

■Features of EcoClear No condensation in the condenser section No cooling water circulation system required No insulation hose required Compact slim design (width 225mm) Significant space-saving as a whole system (installation area is less than 2/3 of conventional systems) Recovery rate under reduced pressure with organic solvents is over 95% Achieves energy savings compared to cooling water circulation systems Compatible with coil-type, simple-type, and jura-type evaporators

• Other physicochemical equipment

-25℃ Thin-type cooling water circulation device

The cooling of the organic solvent recovery section of the rotary evaporator, cooling of measuring instruments, feed, low-temperature reaction baths, etc., can be widely utilized.

• Thermostatic water bath

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In an article on PR TIMES by Sakate Construction Co., Ltd., a construction company in Okayama City, Okayama Prefecture, the wooden lightweight temporary board "Hyper CLT Board" was introduced. Article URL: https://prtimes.jp/main/html/rd/p/000000001.000178852.html The Hyper CLT Board is a temporary construction board made from CLT wood for civil engineering use. It can be used in a wide range of civil engineering sites as a substitute for steel plates, including temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of transportation, installation, and removal. It features characteristics unique to wood, such as glare reduction, noise reduction, and environmental consideration, making it a material that is easy to utilize for creative ideas and safety measures in public works. It is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS as "TH-250021-A" and can be considered for civil engineering sites both within and outside Okayama Prefecture.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.