Notice of Participation in "BioJapan 2023" from Wednesday, October 11 to Friday, October 13, 2023.

There are numerous research examples, including skin models and models of various organs (heart, liver, kidneys, etc.)!

We would like to introduce our bio 3D printer, the "BIO X Series." We offer the "BIO X" and "BIO X6," which allow for flexible use according to research purposes. As an application example, in "cell and molecule encapsulation," cells, drugs, proteins, spheroids, and more can be embedded within hydrogel beads. Additionally, it is possible to print multiple cells and materials using up to six print heads. 【Flexible Use According to Research Purposes】 ■ Utilize multiple print heads ■ Continuously print models ■ Create flexible 3D models ■ Dispense materials like Matrigel *For more details, please refer to the PDF document or feel free to contact us.

• others

Compatible with a wide range of materials. Ensures high cleanliness with UV-C lamps and HEPA filters. Also focuses on ease of use.

The "BIO X" is a desktop bio 3D printer equipped with an intelligent print head (iPH) that can accommodate a wide range of materials. It features two high-output fans at the top of the device, which pressurize the cavity with clean air filtered through HEPA filters and other means. Additionally, it is equipped with UV-C lamps that maintain a clean printing environment through an automatic cycle. 【Features】 ■ Compatible with temperature-sensitive materials such as collagen and gelatin ■ A wide lineup of high-performance print heads ■ Easy replacement of print heads ■ Suitable for a wide range of applications *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

Highly flexible 3D bioprinting! Featuring a bio 3D printer with cell ink.

Cell culture, which is essential in fields such as regenerative medicine, oncology using stem cells, drug discovery, and toxicity evaluation, is still predominantly conducted in two-dimensional cultures. However, some may wonder if conducting experiments in three dimensions, similar to the cells themselves and the surrounding environment in vivo, would allow for a more faithful study of cell behavior. In this document, we introduce the importance of three-dimensional culture and our company's 3D bioprinting technology, as discussed with our application specialists. We encourage you to read it. [Contents (partial)] - Highly flexible 3D bioprinting - Usable even by beginners, allowing for plenty of trial and error - Extrusion printer BIO X - Light-curing bioprinting LUMEN X+ *For more details, please refer to the PDF document or feel free to contact us.

• 3D Printer

Cells are suspended in a gelatin-based biomaterial and shaped using a bioprinter. Subsequently, bone formation differentiation is induced and evaluated during culture.

We are introducing application examples utilizing the BIO X series 3D bioprinter. This product allows for flexible use tailored to research purposes across a variety of applications. There are numerous research cases, including skin models, various organ models (such as heart, liver, kidney, etc.), and cancer disease models. [Contents] - Bioprinting of primary human mesenchymal stem cells and vascular endothelial cells - Multilayer tissue models using multiple cells and materials - Encapsulation of cells and molecules - High-precision automatic dispensing of Matrigel *For more details, please refer to the PDF materials or feel free to contact us.

• 3D Printer

Developed a bio-ink composed of human endothelial cells, human pericytes, and animal collagen, and printed the structure.

Current artificial skin graft products promote wound healing, but they ultimately detach because they do not integrate with the patient's skin tissue. The lack of a functional vascular system in artificial grafts poses a significant barrier. We have developed a bioink composed of human endothelial cells, human pericytes, and animal collagen, allowing us to print these structures using the "CELLINK BIO X" and a temperature-controlled print head. This combination of critical elements enables cells to initiate communication and begin forming vascular structures with characteristics similar to biological blood vessels within weeks. Once the vessels are formed, they can exchange nutrients and waste, sustaining the survival of the graft. [Overview] ■ Institution: Rensselaer Polytechnic Institute ■ Challenge: The lack of a functional vascular system in artificial grafts is a significant barrier ■ Solution: Using CELLINK BIO X and a temperature-controlled print head ■ Results - Begin forming vascular structures with characteristics similar to biological blood vessels within weeks - Once vessels are formed, they can exchange nutrients and waste, maintaining the survival of the graft *For more details, please refer to the related links or feel free to contact us.

• 3D Printer

Introducing bio-printing technology for 3D heart models designed for personalized medicine and transplantation.

In Dr. Carmine Gentile's laboratory in Sydney, research is being conducted to develop bio-printed heart tissue using patient-specific cells to minimize the risk of transplant rejection. In a 2020 study, mouse cells were bio-printed using alginate-gelatin hydrogel with CELLINK's "BIO X." The bio-printed heart cells were cultured for 7 to 14 days until they developed into pulsating patches of heart tissue. During open-heart surgery on mice from which the cells were derived, the vascularized heart patches were transplanted into the damaged areas of the heart. The transplantation aimed to test the safety of the bio-printed patches and confirm their positive effects on heart function, both of which were validated. [Summary] - Facility: Dr. Carmine Gentile's laboratory in Sydney - Challenge: Development of bio-printed heart tissue - Results: - Safety of the bio-printed patches - Positive effects on heart function *For more details, please refer to the related links or feel free to contact us.*

• 3D Printer

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube