[Notice of Exhibition Participation by Fukuda Co., Ltd.] TOKYO PACK 2026 Tokyo International Packaging Exhibition

Reliability of pharmaceutical standards applied to food lines.

In recent years, the environment surrounding the manufacturing sites of food and pharmaceuticals has changed significantly. Consumers' scrutiny of food safety and quality has become stricter than ever, and in the event of a product accident (such as food poisoning) caused by "seal defects" or "pinholes," it could lead directly to a large-scale recall and a loss of brand trust. If this involves a core product, it could jeopardize the company's survival. (From July 2021 to June 2025, there were 15 cases of voluntary recalls due to packaging defects.) On the other hand, the labor shortage supporting these sites has become increasingly severe, making it increasingly difficult to maintain a quality control system that relies on the skills and intuition of experienced workers. 1. The dilemma of "risk and cost" faced by manufacturing and quality assurance sites Is your manufacturing and quality assurance site also facing a serious dilemma regarding "quality control and on-site costs"? *Please be sure to check the continuation of the column from the "related links."

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

It is ideal for rice pack containers. The pinhole inspection in the packaging process is fully automated, eliminating packaging defects based on consistent quality standards.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on a consistent quality standard. The judgment results and operational status can be managed via a monitor screen. - Target work example: Ideal for packaged rice (packaged rice) - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design allows connection to existing production lines - Quick response for changeovers due to variety switching can be handled in a short time by replacing the chamber - Fully domestically produced, allowing for rapid maintenance and troubleshooting *Please consult us regarding the application of this product for pharmaceuticals.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Desktop machine for Container Closure Integrity Testing (CCIT)" "Device for testing the seal integrity of packaging containers

This is a leak testing device to confirm the airtightness of packaging containers. - Achieves improved reliability of formulations - Detects peeling, tearing, and the presence of pinholes in packaging containers, and displays differential pressure, leakage amount, graphs, etc. - Easy operation with a touch panel - Inspection targets: pillow packaging, PTP, three-side or four-side seals (packaged products), plastic bags (e.g., infusion bags), strip packaging (SP packaging), gusset packaging, stick packaging, jar containers, etc. - Usage locations: manufacturing offline, CMC laboratories, quality control testing laboratories, stability testing, etc.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Pseudo-defects with specified hole diameter and hole length (reference test piece). Please use for leakage testing or evaluation.

This is a pseudo-defect (reference test piece) that specifies hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). - Evaluation of packaging integrity in accordance with JP18 - Setting of "maximum allowable leakage limit" - Testing for the intrusion of water vapor, oxygen, and microorganisms - Quantification from qualitative testing methods (converting current leakage standards to hole diameter)

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Handheld hydrogen leak detector / gas leak capable of high sensitivity and wide range measurements (0.5 ppm to 5000 ppm).

The "HDA-0100 series" allows for high-sensitivity and wide-range hydrogen measurement, despite being a handheld type. The minimum detectable leak rate is equivalent to 1×10⁻⁶ Pa·m³/s. It can measure from 0.5 ppm to 5000 ppm. It is compact and lightweight, making it convenient to carry. 【Features】 ■ Measurement range is high sensitivity and wide, from 0.5 ppm to 5000 ppm ■ Compact and lightweight, weighing approximately 300 g (excluding battery) ■ Battery-operated and cordless (continuous usage time of about 8 hours) ■ All operations can be performed with one hand, offering excellent operability, and the color LCD screen provides high visibility *For more details, please contact us or refer to the PDF download.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Gas Detection Sensor

**Seminar Points** Improvement means changing standards for the better. There can be no improvement where there are no standards. If there are no standards, start by creating them. Standards are "rules." What to decide are "procedures," "methods," and "timing." This seminar is focused on determining "procedures" and creating "work instruction documents." **"Without standards, there is no improvement" — Learning from Toyota's teachings on documentation in the workplace** The source of Toyota's strength lies in the concepts of "improvement" and "standardization." At the core of this is a culture of making insights and skills visible in the workplace and documenting them. In other words, it is a system of knowledge transfer through documentation. Relying on the experience and intuition of veterans can be a strength in the workplace, but it also carries the risk that quality may change when people change. By ensuring that everyone performs tasks in the same way, we can achieve the same quality products (good products) in the same amount of time. First and foremost, the development of "work instruction documents" is essential. When presenting work instruction documents in video format, it is also a prerequisite that this "foundational document" is well established. *For more details, please download the PDF or contact us.*

We will be exhibiting at the "Livestock Materials EXPO" held at Makuhari Messe! We plan to showcase examples of our "Fermentation Drying Equipment for Livestock Manure," provide information on our "Composting Equipment and Deodorants," and introduce our "Subsidy Projects." Please feel free to stop by our booth. We will give a small gift to those who fill out our survey or have implemented our composting system! We look forward to meeting everyone. = Exhibition Information = Dates: October 1 (Wednesday) to October 3 (Friday), 2025, for three days from 10:00 to 17:00 Venue: Makuhari Messe, Halls 5-7, 9, and 10 2-1 Nakase, Mihama-ku, Chiba City Booth Number: Hall 9, 35-6

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

[Speaker] Mizutani Masataka Senior Researcher Energy Comprehensive Engineering Research Institute, General Incorporated Foundation Carbon Neutral Technology Center, Power System Group [Key Lecture Content] As discussions progress towards the revision of the GHG Protocol Scope 2, elements such as "when and where the electricity was generated" are gaining attention in corporate renewable energy procurement and CO2 emissions calculations. Additionally, with the expansion of renewable energy adoption, the CO2 emission intensity of electricity has begun to fluctuate significantly depending on the time of day and region. In this lecture, we will organize topics such as hourly matching, deliverability, and standard supply services (SSS) that are being discussed in the Scope 2 revision, and introduce examples of hourly CO2 emission intensities provided both domestically and internationally. Furthermore, through analysis examples using publicly available data, such as office buildings and EV charging, we will explain what can be revealed through hourly evaluations and consider the implications and responses for future renewable energy procurement, non-fossil certificates, and PPAs.