On-site safety measures for overhead painting robot Soft Boy Pro.

Suitable for reducing painting costs of mobile phone painting systems!

■Example: Paint consumption - approximately 1g (per mobile phone piece) ■Color matching / color change time - approximately 2 to 3 minutes ■Color reproducibility - hue stability ■Film thickness control - freely adjustable from 3 to 30μ ■Production capacity - approximately 60 pieces ■Networking - N/DACS compatible ■Teaching-less - dedicated keitai-PACK ■High-efficiency painting - dedicated jig development

• Other painting machines

Low noise design, long lifespan. Spray booth using oil in the cleaning solution.

● A painting booth that uses a special oil in the cleaning solution. ● The oil catches overspray mist. ● With a low noise design of 68db, conversations can be held even in front of the booth. It allows for painting that takes into consideration the surrounding environment. ● By connecting a sludge recovery device (optional), sludge can be semi-automatically processed and solidified through a centrifugal separation method, significantly reducing industrial waste costs.

• Painting Machine
• Other painting machines
• Other dust collectors and related products

This is a space-saving painting robot system that has been developed specifically for painting, with all the necessary equipment for painting completed in one unit and designed to be suspended from the ceiling.

◆Key Features 1) Numerical management painting system 2) Significant reduction in paint usage 3) Reduction in defect rates 4) Easy color matching 5) Easy cleaning and color change 6) Good operability, suitable for any operator 7) Small installation space 8) Low overall energy consumption *) No technicians required

• Other painting machines

Heat recovery type, low running cost, hot air dryer for painting.

The world's only hot air drying furnace, Drytech, is well-known in the painting industry. Its excellent finish, rapid temperature rise, good temperature distribution, and low fuel consumption make it a bestseller worldwide. Additionally, it is a dryer that pursues quality and cost-effectiveness, suitable for installation in clean rooms.

• Other painting machines
• Drying Equipment
• Industrial Furnace

Reduce the painting cost of door mirrors and achieve high quality. Dedicated painting robot system.

A door mirror painting system standardized by painting technology cultivated through mobile phone coating and the latest system technology. This technology addresses three themes simultaneously: quality, cost, and environmental considerations, by reducing paint consumption, enhancing quality through thin-film multi-coating, and being environmentally friendly. It also resolves quality variations between scattered factories through high-level data compatibility.

• Articulated Robot
• Other painting machines

Standard system for super spindle coating.

The "SUPER SPINDLE 300C" is a completely new painting system developed as a painting robot system specifically for mobile phones and mobile communication devices. Information such as spray pressure, atomization pressure, and pattern pressure settings can be configured on a computer monitor within the controller. The compact and simple design, in conjunction with the paint supply system, allows for quick and easy cleaning operations. Automation significantly improves work efficiency and work environment, while also greatly reducing industrial waste costs. 【Differences from General Spindle Systems】 ■ Capable of saving painting data ■ Easy color change setup ■ Spray method using an overhead robot system ■ Collaboration between the robot system and oil booth, sludge recovery device ■ Workpieces are attached to a circular dedicated jig, allowing for painting in both forward and reverse rotation with the jig *For more details, please refer to the PDF document or feel free to contact us.

• Articulated Robot
• Other painting machines

Dedicated for creating painting data

"Data Pro" is a painting robot system that manages coatings, paint films, and paints, creates an optimal environment, and supplies consistent quality at low cost. It solves the waste of costs associated with running the line for condition setting. It enables advanced offline teaching and visualization and management of paint usage and painting time. Additionally, if you use Takubo's robot series, you can transfer data to painting lines located around the world, install it on the painting line's robot, and reproduce it with simple adjustments such as teaching and fixtures. [Features] ■ Compatibility of data ■ Elimination of quality differences between factories ■ Production with stable quality ■ Support for global strategies and globalization ■ Realization of world-standard quality *For more details, please refer to the PDF materials or feel free to contact us.

• Articulated Robot
• Painting Machine
• Other painting machines

Small-sized painting robot in SS size dedicated to inner illumination buttons, switches, and small item work.

As an evolved version of the previous generation small SS-type robot, it makes a new appearance with a sharp design. It demonstrates its power in laser-cutting paint. It adopts the technology of rotational coating R, which excels in film formation performance. It is compatible with everything from mobile communication devices to automotive interior and exterior parts.

• Articulated Robot

Space-saving type oriented towards automation, which can also be integrated into automated lines.

Batch or automatic dual-compatible painting system

• Articulated Robot
• Other painting machines

Dedicated Robot System for Paint Data Creation

Quantifying the information necessary for painting. A dedicated robot for pre-production conditions such as film thickness, quality, painting time, and paint consumption. It is suitable for purposes other than mass production, such as education, sampling, and research.

• valve
• Articulated Robot
• Painting Machine

Takubo-style exhaust heat recovery hot air drying system

An essential exhaust heat recovery hot air drying system for building a highly efficient painting environment.

• Other painting machines
• Drying Equipment

●Equipped with the specifications necessary for data creation ●Developed specifically for creating painting data ⇒ Enables production that maximizes quality and cost efficiency

- Acts as a key station for painting and allows the transferred data to be compatible with the same Softboy Pro series. - Faithfully reproduces data and supports the globalization of painting. - Enables numerical management of paint consumption, painting time, painting conditions, and more. - Also adapts to the traceability of painting and serves as an educational tool for robot operators, contributing to the improvement of painting technology levels.

• Painting Machine
• Other surface treatment equipment

Newly developed high-capacity painting robot line dancer.

A single robotic arm can be equipped with up to 12 spray guns.

• Other surface treatment equipment

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.