*New Special Price* Connector product for powder and bulk materials 'BFM Fitting'

- New Purchase Campaign Ongoing - The shoot piping can be attached and detached without tools. It seals the connection points securely, preventing powder leakage and accumulation.

【New Purchase Discount Campaign Until the End of September 2024】 We are offering a "first-time set discount price" exclusively for new purchases! Additionally, for six months after your purchase, you will also receive a "20-30% discount" on any additional items purchased! Please feel free to contact us for more details. The 'BFM Fitting' is a connector product that allows for the attachment and detachment of shoot piping without tools, contributing to the prevention of powder material leakage with its high sealing capability. It demonstrates excellent sealing performance even in high-pressure environments of 60 kPa, and its superior material strength makes it resistant to tearing and detachment. You can choose products that meet your needs from a wide range of options, including usable temperature ranges, electrostatic measures, and breathability. 【Features】 ■ Shoot piping can be installed in as little as 40 seconds, contributing to increased productivity. ■ Reduces the risk of powder accumulation and scattering during removal. ■ A wide range of sizes available in 50mm increments. ■ A transparent type is also available, allowing you to check the transport status from the outside. *For more product details, please refer to the PDF download.

• Other Connectors

This is a specification made of transparent thermoplastic polyurethane, suitable for use in environments where static electricity is a concern.

"Seeflex 040AS" is a non-breathable connector made from transparent thermoplastic polyurethane with added antistatic agents. Its flexible material provides resistance to bending, making it suitable as a flexible material. It has excellent abrasion resistance, chemical resistance, and tear resistance. This product is a suitable choice for achieving a dust-free factory through dust and dirt prevention. 【Features】 ■ Designed for applications where static electricity is a concern ■ Resistant to bending, making it suitable as a flexible material ■ Excellent abrasion resistance, chemical resistance, and tear resistance ■ A suitable choice for achieving a dust-free factory through dust and dirt prevention *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The shoot piping can be attached and detached without tools. It seals the connection points securely, preventing powder leakage and accumulation. A product introduction video is currently available.

The "BFM Fitting" is a connector product that allows for the attachment and detachment of chute piping without the use of tools, contributing to the prevention of powder material leakage with its high sealing capability. It demonstrates excellent sealing performance even under high-pressure conditions of 60 kPa, and its superior material strength makes it resistant to tearing and detachment. You can choose products that meet your needs from a wide range of options, including temperature ranges, static electricity measures, and breathability. *Demo units are available for free rental. Please feel free to apply through the "Contact Us" section. 【Features】 ■ Chute piping can be installed in as little as 40 seconds, contributing to increased productivity. ■ It also reduces the risk of powder accumulation and scattering during removal. ■ A wide range of sizes is available in 50mm increments. ■ A transparent type that allows you to observe the transport process from the outside is also available. *For more details about the product, please refer to the PDF download.

• Other Connectors

This is a bag loader for filling bulk bags that can be used regardless of the presence of an inner liner.

The "BFM(R) Bag Loader for FIBC" is a product that enables clean and efficient filling. It is equipped with a three-layer filling head that is completely covered with a stainless steel tube and SeaFlex polyurethane resin. Additionally, it comes with an 8mm air injection plug that connects to the air pressure line, allowing the robust and flexible outer layer to be inflated with air pressure. It can be used with either type of FIBC, regardless of whether a liner (inner bag) is present. 【Features】 ■ The inner and outer sleeves are made of durable "SeaFlex" polyurethane resin. ■ A stainless steel core tube wrapped in a SeaFlex sleeve. ■ The lower end features a stainless steel ring wrapped in the sleeve. ■ An 8mm L-shaped compressed air inlet (with reinforced mounting section). ■ Inflates in seconds and fits securely to the neck of the FIBC. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The cap is made of high-durability transparent thermoplastic polyurethane, preventing contamination and foreign matter intrusion.

By using the "BFM Blanking Caps," you can prevent contamination inside the piping during cleaning and replacement. They protect the products being manufactured and prevent the release of dust into the factory. "BFM Socks/Bins" are also suitable as collection containers for oversized powders coming from the shifter. Additionally, they are transparent to check the filling level and product quality, and you can insert a plastic bag inside the Socks to quickly collect discharge and maintain hygiene levels. 【Features】 ■ Prevents contamination inside the piping during cleaning and replacement ■ Protects the products being manufactured ■ Transparent for checking filling levels and product quality ■ Quickly collects discharge ■ Made from high-durability Sheeflex 040E *For more details, please refer to the PDF document or feel free to contact us.

• Other powder equipment

Made of lightweight transparent thermoplastic polyurethane, it is ideal for equipment such as measuring instruments.

The "Seeflex 020E" is a non-breathable connector made from transparent thermoplastic polyurethane. It utilizes a lightweight Seeflex material, which is also highly resistant to wear, making it suitable for devices such as load cells and lightweight machines. This product is an ideal choice for achieving a dust-free factory through dust and dirt prevention. 【Features】 - Utilizes lightweight Seeflex material - Made from transparent thermoplastic polyurethane - Flexible material provides strong resistance to bending - Highly resistant to wear - Smooth welding finish *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

These are exhaust and intake parts made of 100% polyester felt suitable for breathable applications.

The "FM1 Breather" is a product made from 100% polyester felt. It is designed for breathable applications such as venting from hoppers and other container vessels. This BFM air vent is necessary for applications that require a 100% sealing system constructed with BFM connectors. 【Features】 - Made from 100% polyester felt - Designed for breathable applications such as venting from hoppers and other container vessels - Necessary for applications that require a 100% sealing system constructed with BFM connectors *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

It is made of woven fabric material that is optimal for use in low-temperature environments down to -70°C.

The "LM3" is a woven fabric connector made of 100% polypropylene (breathable). It is suitable for use in low-temperature environments down to -70°C. It is appropriate for use in food processing and is particularly effective when some breathability is needed to relieve pressure. Please feel free to consult us when you need assistance. 【Features】 ■ Made of 100% polypropylene woven fabric ■ Suitable for use in food processing ■ Particularly effective when some breathability is needed to relieve pressure *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

This is a strong pressure-resistant specification with a polyester lining inserted into transparent thermoplastic polyurethane.

The "Seeflex 060ES" is a connector that enhances durability against positive pressure by incorporating a polyester inner layer into a transparent thermoplastic polyurethane. The polyester layer, which is welded on the inside, restricts the expansion of the connector, achieving excellent positive pressure resistance. It is suitable for continuous use in overpressure conditions of up to 1.3 bar. 【Features】 ■ Enhanced durability against positive pressure by incorporating a polyester inner layer into transparent thermoplastic polyurethane. ■ The welded polyester layer on the inside restricts the expansion of the connector, achieving excellent positive pressure resistance. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

It is a flexible connector made of transparent thermoplastic polyurethane, designed for CIP cleaning.

"Seeflex 040E" is a non-breathable connector made from transparent thermoplastic polyurethane. Its flexible material provides resistance to bending, making it suitable as a flexible material. It has excellent chemical resistance for CIP and cleaning. It can be used in various applications, including sanitary, vibration equipment, shifters, and powder devices. 【Features】 ■ Made from transparent thermoplastic polyurethane ■ Resistant to bending, suitable as a flexible material ■ Excellent abrasion resistance ■ Smooth finish on welded surfaces ■ A suitable choice for achieving a dust-free factory through dust and dirt prevention *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

It is made of woven fabric material suitable for use in high-temperature environments up to 130℃.

The "LM3" is a connector made of 100% polyester woven fabric (breathable). It can be used in high-temperature environments up to 130°C. It has a glossy finish and is mainly used in applications where ventilation is required in the flexible part. Please feel free to consult us when you need assistance. 【Features】 ■ Made of 100% polyester woven fabric ■ Mainly used in applications where ventilation is required in the flexible part ■ Usable in high-temperature environments up to 130°C *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

Maintains high flexibility down to -73℃ (-99°F)! Designed to dissipate static charges.

"Teflex NP Opaque" is a non-breathable PTFE (Teflon) product. It complies with FDA and EU standards for use in food processing. It can withstand temperatures up to 300°C for intermittent use and up to 316°C/600°F for short periods. Additionally, it maintains high flexibility down to -73°C (-99°F). 【Features】 ■ Non-breathable PTFE (Teflon) product ■ Usable in high-temperature environments ■ Can be used without being affected by corrosive and acidic products ■ Designed to dissipate static charges ■ Complies with FDA and EU standards *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Compliant with FDA and EU standards! Can be used without being affected by corrosive and acidic products.

"Teflex NP Black" is a non-breathable connector designed to dissipate static electricity. It can withstand up to 300°C for intermittent use and up to 316°C/600°F for short periods. It maintains high flexibility down to -73°C (-99°F). Additionally, it complies with FDA and EU standards for use in food processing. 【Features】 ■ Non-breathable PTFE (Teflon) product ■ Maintains high flexibility down to -73°C (-99°F) ■ Can be used without being affected by corrosive and acidic products ■ Designed to dissipate static electricity *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.