Today is the last day!! We will be exhibiting at "Messe Nagoya 2023"! November 8-10.

The technology is also adopted in essential components of aircraft and artificial satellites. With high-spec machinery and experienced technology, we provide MIL-spec quality.

Our company specializes in high-precision cutting processing utilizing high-spec machinery and factory environments, along with processing techniques cultivated over many years. We can handle a variety of difficult-to-cut materials, including not only resins and common metals but also titanium, molybdenum, tantalum, tungsten, nickel, and cobalt. By engaging in a wide range of fields, including aerospace, medical devices, and optical equipment, from research and development prototypes to the processing of small quantities of diverse products, we create new manufacturing through our refined processing and measurement technologies. ★Features ■ Over 100 machines capable of short delivery times and small-lot, diverse production ■ Equipped with constant temperature and vibration-proof environments suitable for precision processing and measurement ■ Manufacture of critical core parts for HTVs and artificial satellites, such as thruster injectors ■ Proven track record in the production of oxygen-free copper linear collider "acceleration tubes" on a micron order ■ Achievements in thin-walled processing of 0.01mm and drilling φ0.3mm through holes in φ0.5mm mechanical pencil leads #AccelerationTube #ThrusterInjector *For more details, please refer to the PDF materials or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

Contract measurement using measurement X-ray CT scanning for non-destructive internal observation and visualization measurement. Dimensional measurement of internal components! Also for reverse engineering.

Features of Our Contract Measurement Services ■ High-performance measurement CT scan system equipment. Capable of high-precision measurements, manufactured by Shimadzu Corporation, XDimensus 300. https://www.an.shimadzu.co.jp/ndi/products/dimensional_xct/index.htm ■ In addition to non-destructive visualization of internal shapes, high-precision measurements are possible. ⇒ Effective for measuring internal shapes of parts that are difficult to measure with a three-dimensional measuring machine. Specific example: Undercuts, etc. ■ Measurement capabilities for observing and analyzing internal structures and defects. Specific example: Internal analysis during ASSY product defects, voids: observation and analysis of bubbles and cracks. ■ Acquisition of cross-sectional images of internal and external shapes, and the ability to create three-dimensional images, 3D models, and drawings. ■ Consistent support for reverse engineering. ⇒ We provide measurement and scanning of parts, actual measurement results, 3D data, and actual measurement drawings as per your request. Processing and manufacturing are also possible at our company. *For more details, please refer to the PDF materials or feel free to contact us. When inquiring, please reach out through the related link below (inquiry form).

• X-ray inspection equipment
• Contract measurement
• Contract Inspection

Sample of through-hole processing for sharp core (Φ0.5) available!! Clear difficult fine hole processing with abundant high-precision processing equipment and unique technology!

At You Corporation, we accept orders for precision machining of fine holes, small diameters, and deep holes with strict accuracy requirements. Small diameter holes require thin cutting tools that are prone to breakage, but our company addresses this with the technology and experience we have cultivated over many years, along with high-precision machining equipment! Additionally, we overcome the challenge of "difficulty in achieving coaxiality due to tool deflection in long holes" by innovating the workpiece fixation methods, ensuring we meet stringent accuracy standards! Please entrust us with the machining of difficult materials such as aluminum, stainless steel, titanium, Inconel, Kovar, and Super Invar! We also handle resin machining, including ABS, PC, POM, PEEK, PPS, and PA, all in our own factory. ★Features ■ Proven track record of through-hole machining on sharp cores (Φ0.5) ■ Technology and experience cultivated over many years, along with high-precision machining equipment ■ Capable of machining difficult metals and resins #LongHoles #CuttingTools #Deflection #Coaxiality *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (contact form) below.

• Processing Contract

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery workspaces, and material storage areas use ground plates. Traditional steel plates are heavy, requiring large machinery for installation and removal, which can make work difficult in narrow sites. Hyper CLT ground plates are lightweight civil engineering CLT materials made from wooden CLT for civil use. A 5×10 plate weighs about 230 kg, and a 5×20 plate weighs about 460 kg, making them easy to handle even with small machinery, thus reducing the burden of transportation, installation, and removal. They are easy to use in sites with limited space or where the use of large machinery is difficult. They can be widely used for temporary roads, heavy machinery scaffolding, pathways within the site, and material storage protection, contributing to glare reduction, noise reduction, and environmental consideration. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended as materials for innovative ideas and safety measures in public works.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!