The most recommended and ideal data destruction device right now is the physical destruction device, Storage Puncher STPN-30.

USB duplicator equipped with a CD-ROM function that prevents data tampering, deletion, and formatting using a dedicated USB, allowing for data protection.

The U-Reach C series USB duplicator offers optimal models ranging from 1:9 to 1:119 depending on the number of slots. It can write at a speed of 2.0GB per minute. CD-ROM creation involves a write protect feature to prevent data tampering, deletion, and formatting, resulting in Read-Only Memory (ROM). When this memory is inserted into a PC, it is recognized as a CD-ROM rather than a USB memory, allowing for automatic autorun. It is ideal for movies, music, and content. Traditionally, USB data did not have protection, leading to issues such as easy deletion, tampering, and formatting, making it unsuitable for distribution. A dedicated USB memory is required. Furthermore, with this duplicator, it is possible to erase CD-ROM formatted content and write new data multiple times. Overall, it allows for the selection of protection for each partition.

• Expansion Boards
• Other operation management software
• Encryption and authentication

An electric device that physically destroys HDDs with 12 tons of hydraulic power and 4 destruction bits. By swapping the destruction tool, it can also destroy SSDs and magnetic tapes.

1. Simple operation that allows physical destruction by simply inserting the recording medium into the main unit and pressing the start button. 2. Destruction power of up to 12 tons. 3. Uses hydraulic power, enabling high-power destruction of HDDs. 4. With just one main unit, by exchanging various destruction tools, it is possible to physically destroy SSDs and magnetic tapes (world's first). 5. Creates four holes in the HDD during a single destruction, destroying the recording surface platter. 6. Even if the destruction bit (pin) is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in locations without power, enabling on-site destruction work (world's first).

• Other server related
• Other security
• Data Erasing

An electric physical destruction device that cuts LTO and other magnetic tapes with 12 tons of hydraulic power and cutting blades. By replacing the destruction tool, it is also possible to destroy HDDs and SSDs.

1. Simple operation by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling high-power magnetic tape cutting. 4. By exchanging various destruction tools on a single main unit, physical destruction of HDDs and SSDs is also possible (world's first). 5. Even if the cutting and destruction blade is damaged or worn, it can be easily replaced, allowing for continuous work with peace of mind at any time. 6. Battery operation is possible even in locations without power, enabling on-site destruction work (world's first).

• Other information systems
• Other security
• Data Erasing

An electric destruction device capable of physically destroying HDDs and SSDs with 12 tons of hydraulic power. By simply changing the tool, it can also destroy magnetic tapes with one unit.

1. Simple operation that allows physical destruction by just inserting the recording medium into the main unit and pressing the start button. 2. Destruction power of up to 12 tons. 3. Uses hydraulic power, enabling high-power destruction of HDDs and SSDs. 4. Creates four holes in an HDD and bends an SSD for physical destruction in a single operation. 5. With just a tool exchange on the main unit, physical destruction of magnetic tapes is also possible (world's first). 6. Even if the destruction bit at the tip is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the HDD destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in locations without power, enabling on-site destruction work (world's first).

• Other server related
• Other security
• Data Erasing

CLT, which has been widely adopted in the construction field, is now expanding its applications into the civil engineering sector. The "Hyper CLT Mats" are civil engineering CLT products that utilize wood CLT as temporary materials. Traditionally, steel plates have been the mainstream choice for temporary roads, access routes, and heavy machinery yards. The Hyper CLT Mats introduce a new option of "wood" to that market. The 5x10 mats weigh approximately 230 kg, making them lightweight and easy to install and remove with small machinery, with a maximum capacity of 40 mats on a 10-ton truck. They also have advantages in terms of workability and transportation efficiency. Moreover, they offer added value that can only be achieved with wood, such as glare reduction, noise control, CO2 fixation, and consideration for aesthetics. This product is expected to be a new proposal for not only construction companies but also building material firms, lumber companies, and material trading companies. It is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The use of wood is not limited to construction anymore. The utilization of Hyper CLT Mats is expanding as a new market that connects civil engineering and wood.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.