【Product Introduction】A comprehensive reveal of our handled products.

With an IP66 waterproof rating, it can be installed 50 meters away from the main unit! Even in the event of extreme weather, it can be addressed by simply replacing the power supply.

Our original 'ZF series' is a power-separated LED floodlight. By separating the power supply, it can be installed 50 meters away from the main unit. It can be installed in locations protected from sunlight (ultraviolet rays), rain, and saltwater. 【Features】 ■ Highest quality made in Japan Achieved high specifications at a low cost ■ Salt-resistant specifications allow use in salt-damaged areas - Aluminum: 6063 aluminum alloy + salt-resistant coating - Stainless steel: 6063 aluminum alloy + salt-resistant coating / Arm and hinge made of SUS316 stainless steel (Note: The salt-resistant coating is applied with a 100-micron polyester resin powder coating throughout) ■ Standard lightning surge protection of 20kV Prepared for recent abnormal weather conditions ■ IP66 waterproof and dustproof Usable both indoors and outdoors (Note: The power supply part is IP67) ■ PSE certified with a 5-year warranty confidence (Note: There may be exclusions even within the warranty period. Please refer to the catalog for details.) * For more details, please request a catalog or view the PDF data from the download.

• LED Module

Waterproof standard IP66 specification that does not affect ship radio communication.

The Honest Original "V Series" is an LED floodlight that can be used on ships. It is also effective in various locations other than ships (see the applications and achievements below). 【Features】 ■ Completely waterproof, with IP66 rating for waterproofing and dustproofing, and has passed salt spray testing. ■ Compliant with PSE Electrical Appliance and Material Safety Law for safe use. ■ Equipped with a temperature protection circuit that automatically turns off the light if the power supply reaches a maximum temperature of 95°C. ■ Strong salt-resistant specifications, made of 6063 aluminum alloy with salt-resistant coating, and the arm and hinge parts are made of SUS316 stainless steel. ■ Standard lightning surge protection of 20kV, limiting current during lightning strikes for protection. ■ Compliant with EMS/EN61000-4-5, providing preparedness for natural disasters. *For more details, please refer to the PDF materials or feel free to contact us.

• Floodlight

With astonishing waterproof and dustproof performance, it can be used in various places for a variety of purposes!

Our original "Field Light-X" is an integrated LED fluorescent light that requires no electrical work. With an IP67 waterproof rating, it can be used outdoors. Additionally, it can be linked together, making it highly effective on construction sites. 【Features】 ■ IP67 waterproof and dustproof Usable both indoors and outdoors (Note: The cord part is IP63, so please be careful when linking.) ■ Linkable design When using 100V, the 40W model can be linked up to 15 units for a total illumination of 100m, and the 20W model can be linked up to 25 units for a total illumination of 145m. (Note: When using 200V, please ensure not to insert 100V products and manage accordingly.) ■ Impact-resistant, made from the highest strength materials Made of polycarbonate that won't break even if stepped on. ■ 3-year warranty As a Japanese manufacturer, we provide reliable support. (Note: Some cases may not be covered even within the warranty period. Please refer to the catalog for details.) *For more information, please request a catalog or download the PDF data.

• LED Module

High brightness yet saves over 70% in power consumption! This is the environmentally friendly fluorescent light!!!

The "LB819 series" is an LED fluorescent lamp with a built-in power supply and single-side power feeding. ■ Safe Circuit Design - Circuit design that suppresses excessive inrush current during initial lighting - Circuit design that suppresses harmonics - Circuit design with an efficiency rate of over 90% - EMI (electromagnetic interference) suppression circuit design ■ Achieving an LED Lamp Design Life of 40,000 Hours - Main electrolytic capacitors have achieved test results with a design life of over 60,000 hours ■ Other Safety Circuits - Overcurrent and overvoltage protection circuits - Safety short-circuit function circuit ■ Electrolytic Capacitors 1. Achieved a test design life of 65,223 hours (7.447 years) at an operating temperature of 77.8°C 2. Achieved a test design life of 73,882 hours (8.434 years) at an operating temperature of 80.2°C 3. Achieved a test design life of 78,908 hours (9.008 years) at an operating temperature of 79.3°C 【Lineup】 3000K / 5000K / 5700K (Note: 4000K is made to order)

• LED lighting

Since it is flicker-free, you won't be troubled by noise and can use it anywhere.

The ballast-free type is a flicker-free LED. It can be used in various locations such as ships, heavy machinery, studios, and museums. This is our number one popular product, with cumulative sales exceeding 13,000 units. *Please note that this product has polarity. 【Features】 ■ Waterproof rating IP65 Can be used indoors and outdoors due to its waterproof and dustproof design. ■ Flame retardant ■ Major manufacturer The LED chip is made by "Epistar," in collaboration with the Japanese manufacturer Toyota Gosei. ■ Energy-saving The power consumption of LEDs is about 1/8 that of incandescent bulbs. *This bulb is compatible with DC (12/24V). Please be aware that it cannot be used with non-specified power sources (such as household AC 100V).

• LED

Using eco-friendly functional glass, BioGlass!

By simply adding it to the auxiliary tank of the car's radiator, it improves fuel efficiency and reduces harmful exhaust gases. Bioglass weakens the surface tension of the coolant, cools the engine quickly, promotes complete combustion of gasoline, and achieves improved fuel efficiency. 1. Add CAR UP to the auxiliary tank of the radiator. 2. The surface tension of the coolant in contact with the bioglass becomes smaller (weaker). 3. The coolant with reduced surface tension cools the engine quickly. 4. The contact area between the coolant and the engine block increases, enhancing thermal conductivity and cooling effectiveness. Additionally, the friction resistance of the coolant decreases, allowing it to circulate faster and improve cooling efficiency. 5. The engine can be cooled efficiently, allowing more air to enter the cylinders. Following these steps, fuel efficiency increases and harmful exhaust gases are reduced.

• Fuel system parts

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.