Streaming video!

For dewatering excess sludge, floating separation scum, etc.! A simple and high-performance screw press dewatering machine with a concentrator.

The "NS-type dewatering machine" is a sludge dewatering system that efficiently processes filtration and dewatering steps using a simple device by separating the concentration and dewatering sections, maximizing the effectiveness of each. The concentration section is required to separate a large amount of water in a short time, and a drum-type concentrator demonstrates significant effectiveness for this purpose. As a result, the screw-type dewatering machine that dewaters the concentrated sludge can achieve high performance even with a compact and simple mechanism. 【Features】 ■ Wide range of applications ■ Simple structure ■ Reuse of filtrate ■ Easy operation management ■ Low noise ■ Compact system *For more details, please refer to the PDF document or feel free to contact us.

• Wastewater/wastewater treatment equipment

By adopting a wedge wire barrel, clogging is less likely to occur, ensuring a high recovery rate!

The "SX type" is a dewatering machine designed to handle large volumes of sludge and similar materials. By adopting a wedge wire barrel, it is less prone to clogging, and the number of dewatering rings allows for a low moisture content to be secured. We offer six types according to processing capacity, starting with the "SX-1," which has a processing capacity of 10-15 Kg/DS/h, up to the "SX-6," which can handle 160-240 Kg/DS/h. 【Features】 ■ Less prone to clogging due to the use of a wedge wire barrel ■ Capable of processing oil-containing sludge ■ Low moisture content can be secured by the number of dewatering rings ■ Six types available according to processing capacity ■ Capable of handling large processing volumes *For more details, please refer to the PDF document or feel free to contact us.

• Wastewater/wastewater treatment equipment

Achieves excellent dewatering performance! Additionally, it minimizes water usage and is considerate of the environment.

The "CS type" is a well-balanced, single-sheet cloth dewatering machine suitable for those concerned about installation space. Its efficient design simplifies the dewatering machine, and the effective combination of suction dewatering and pressure dewatering achieves dewatering performance comparable to high-pressure belt presses. Additionally, with the suction blower, recycling device, and pump built into the frame, it can be installed in a narrower space compared to other dewatering machines, and it features a clean and tidy design. 【Features】 ■ High performance with a simple mechanism ■ Significant reduction in water usage ■ Excellent maintenance ■ Compact design *For more details, please refer to the PDF materials or feel free to contact us.

• Wastewater/wastewater treatment equipment

Simplicity is the pursuit of the best! A belt press dewatering machine capable of handling high-concentration sludge.

The "L type" is a dewatering machine with a simple mechanism that pursues "greater simplicity, greater usability, and broader versatility." It comes standard with a double-stage coagulation reaction tank, which is integrated into the dewatering machine body, saving space. It has a high processing capacity per unit and can handle high-concentration sludge. 【Features】 ■ Standard equipped with a double-stage coagulation reaction tank ■ Space-saving design with the reaction tank integrated into the dewatering machine body ■ Adoption of a pressure-reducing (permeable) roll achieves a reduction in moisture content ■ Broad versatility capable of handling various types of sludge *For more details, please refer to the PDF materials or feel free to contact us.

• Wastewater/wastewater treatment equipment

Covers the weaknesses of belt press type! It allows for the reuse of cleaning water, resulting in water-saving effects.

We would like to introduce the "filtering machine" related to water treatment equipment and sludge dewatering machines that we handle. It features a simple structure and low maintenance, making the replacement of filter cartridges easy. The belt press type dewatering machine allows for the reuse of cleaning water, resulting in water-saving effects. 【Features】 ■ Continuous processing through self-cleaning ■ Simple structure and low maintenance ■ Easy replacement of filter cartridges ■ High durability *For more details, please refer to the PDF document or feel free to contact us.

• Filtration Equipment

Introduction of dewatering machine products and optional products! We also provide an overview of various coagulants and dewatering machine selection.

This catalog introduces sludge dewatering machines and environmental equipment. It features the "CS type dewatering machine," a single cloth type dewatering machine, as well as optional products like "filters" and an overview of dewatering machine selection. Please make use of this for your product selection. [Contents (excerpt)] ■Dewatering machine product introduction ・Single cloth type dewatering machine ・Belt press type dewatering machine ・Screw press type dewatering machine ・Dewatering vehicle *For more details, please refer to the PDF document or feel free to contact us.

• Wastewater/wastewater treatment equipment

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.