January 24-26, 38th NePCON Japan, Introduction of Exhibited Products from the Industrial Equipment Division. We invite you to watch the demo and share your feedback with us.

Thank you for visiting the 38th Internepcon Japan Electronics Manufacturing and Assembly Exhibition.

You can view information about the products exhibited on that day here. 〇 Industrial Equipment Division - Flying Probe Tester APT-1600FD-A (Assembly Board Inspection Device) Unmanned continuous inspection linked with front and rear devices OPC-UA (OPC Unified Architecture) Linked with MES (Manufacturing Execution System) Real-time information collection and management of operational status 〇 RF Division / Solutions Division - RFID Outgoing Management System - RFID UHF Band Continuous Monitoring System - Work performance collection using RFID / Semiconductor IC Tag Reading - RFID × IoT Data Device "RFID Performance Collection System" - Easy replacement from barcode HID reader and key input tool

• Circuit Board Inspection Equipment

Exhibiting at Nepcon 2024 from January 24! We contribute to solving challenges in the manufacturing field through ultra-fast inspection of mounted boards and system improvements utilizing RFID.

We will be exhibiting new products and technologies at the 38th NePCON Japan! 〇Industrial Equipment Division APT-1600FD Dual-Side Flying Probe Tester A flagship model that allows simultaneous inspection of both sides by placing probe heads on the top and bottom of the board. Using OPC-UA (OPC Unified Architecture), our unique software links with your MES (Manufacturing Execution System) to collect and manage operational information in real-time (first-time exhibit). 〇RF Division RFID × IoT Data Service "RFID Work Performance Collection System" Data from IC tags can be sent to the cloud via MQTT just by placing them, enabling data collection. The collected data is visualized through a dashboard function, achieving "visualization of work performance." Since the reader-writer is autonomous, there is no need for a control PC or software development for both HF and UHF bands. Record management of items taken out with just a touch "Item Management System" Utilizing IC tags to reliably record the history of items taken out and returned, preventing omissions and errors in ledger entries, and supporting early detection of forgotten returns or losses. Efficient inventory management is possible through bulk reading with RFID handheld devices. Many more exhibits are planned.

• Circuit Board Inspection Equipment

This is a flagship model that arranges probe heads on both the top and bottom, enabling simultaneous in-circuit testing of the front and back of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in its category. By using the flying probes on both the top and bottom simultaneously, a combination inspection with up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★ You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing ★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Circuit Board Inspection Equipment

Exhibiting at Nepcon 2024 from January 24! Achieving interoperability between industrial equipment and MES systems!

OPC UA (OPC Unified Architecture) is an open international standard developed for safe and reliable data exchange in industries such as industrial automation. It was announced by the OPC Foundation in 2008 and later standardized as IEC62541. It allows for secure and highly reliable data exchange across different types of devices, operating systems, and manufacturers, making it recommended as the standard communication for Industrie 4.0 and increasingly adopted worldwide. Additionally, it is aligned with the international standard for PLCs, IEC61131-3, which provides the advantage of reliably exchanging information from the manufacturing site with higher-level monitoring control systems and Manufacturing Execution Systems (MES). In response to this trend, Takaya has prepared an option to equip the APT series of flying probe testers with an OPC UA server. We are working to promote the spread of industrial IoT standards that bridge FA equipment and IT.

• Circuit Board Inspection Equipment

Programming for FPGAs and special performance tests such as BST can be handled with a flying probe tester.

This is an option that includes a dedicated fixture lift mechanism on the underside operating axis of the APT-1600FD series. It allows for special inspections connected to external devices, such as Boundary Scan Testing (BST), as well as writing to and reading logs from ICs, to be performed in parallel with in-circuit testing. *For an image of the operation, please refer to the YouTube video.

• Circuit Board Inspection Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.