Metal Crack Repair: MS Method for Repairing Cracks and Fractures in Machinery Equipment

We will repair the cracks that have occurred in the metal without applying any heat. This is a crack repair that does not involve heat. It is a crack repair that does not cause any thermal distortion.

The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitching Method) that addresses metal cracks using mechanical methods. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance operations. In general welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." **Features of the MS Method** - No hardening or residual stress due to heat - Elimination of secondary damage - Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements - Completion of construction in a short period → Does not significantly reduce the operating rate of equipment - Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

• bolt

Are you having trouble with the delivery date for your cast metal prototypes? "Casting Prototype Service!" for cast iron, aluminum castings, and stainless steel castings (lost wax casting)!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to produce prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be modeled at the same time in one molding process. This allows for the verification of multiple types in a short period.

• Other food machinery

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

This is a pseudo-defect (reference test piece) that specifies the hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). ● Evaluation of packaging integrity in accordance with JP18 ● Setting of "maximum allowable leakage limit" ● Testing for the intrusion of water vapor, oxygen, and microorganisms ● Quantification from qualitative testing methods (converting current leakage standards to hole diameter)

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

CLT, which has been utilized in the field of architecture, is now expanding its possibilities into civil engineering sites. The "Hyper CLT Mats" are wooden lightweight mats that utilize CLT. They can be used as wooden mats for temporary roads, access routes, heavy machinery work yards, and material storage areas, providing an alternative to traditional steel plates on site. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds, as well as CO2 fixation, thanks to its wooden composition. Moreover, the Hyper CLT Mats are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A," making them eligible for proposals in the use of new technologies in public works. Transforming CLT from "building material" to "civil engineering material," it is expanding the new possibilities of civil engineering CLT in the form of wooden lightweight mats.