(Surface Grinding) Sludge Recovery Success Case 2 (Achieved zero liquid replacement operation for 7 years with a low failure rate!)

Powerfully collect "sludge" in coolant liquid using a magnetic method!

(Main Features) 1. High sludge recovery capability and dewatering performance 2. Long-term maintenance of coolant processing liquid 3. Low frequency of failures (long-term stability) (What's Different!) 1. Improved durability of the drive system - Prevents sludge/grit contamination in the drive system (maintains initial performance for a long time) 2. Special hardening treatment on the surface of the magnetic drum - The magnetic drum and dewatering roller are resistant to scratches 3. Adoption of a forced drive system for the dewatering roller 4. Unique magnetic arrangement based on magnetic field analysis technology

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

The strongest magnetic drum in history / Surface magnetic force of 9000 gauss! The "UK" has been newly added to the Fine Mag series, which has the highest customer rating No. 1.

● Magnetic force of 9000 Gauss (drum surface) ● Recovery capacity is an impressive 1.7 times that of the K-type (our standard model)! (Grinding sludge 5-15um) ● Demonstrates powerful recovery for hard-to-magnetize sludge (e.g., from carbide tool grinding)! (Here’s what’s different!) 1. High effectiveness in recovering hard-to-magnetize sludge generated in "carbide tool processing," which has been difficult to recover with conventional methods, as well as "ultra-fine sludge" from honing, lapping, super finishing, and electrical discharge machining. 2. Contributes to resource recycling by recovering "rare metals" (such as tungsten) contained in carbide sludge. 3. No parts that require regular replacement, such as "secondary filtration devices" (paper, diatomaceous earth, line filters), significantly reducing running costs and replacement labor.

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

Collect non-magnetic sludge with a filter! ❶ Filter sludge from 10 to 95μ ❷ Available with magnet + paper filter model ❸ Available with high flow processing model

(Main Features) ◎ Filters sludge in coolant liquid using a paper filter ◎ Capable of filtering from 10 to 95μ by selecting the appropriate filter paper ◎ A dual set model with both "magnet type" and "paper filter type" is also available! ◎ Significantly reduces the consumption of filter paper, lowering running costs (What's Different!) ★ Significantly reduces unnecessary consumption of filter paper with a "float switch"!

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

We will introduce coolant devices such as "magnet separators," "cyclone separators," "paper filters," and "filter conveyors."

1. "Magnet Separator" ◎ Achieves "high filtration performance" and "high wear resistance" ◎ A rich lineup optimal for usage conditions including "grinding processing / cutting processing / shaving processing" 2. "Cyclone Separator" ◎ High-performance, energy-saving "Cyclone Separator" ◎ Added foam prevention function 3. "Paper Filter" ◎ Removes impurities such as grinding sludge and abrasives with the "Paper Filter" ◎ Usable regardless of "magnetic / non-magnetic" 4. "Filtration Conveyor" ◎ A conveyor equipped with the function to "remove / filter" sludge and chips from the processing fluid 5. "Level Gauge" (Liquid Level Meter) ◎ Selectable according to the machine used, including stroke range, detection method, and detection position 6. "Oil-Water Separator" (Disk Skimmer) ◎ Recovers oil floating on the coolant tank liquid level 7. "Chip Processing Related Equipment" ◎ Supports factory environment improvement, reduction of industrial waste, and recycling

• Separation device
• Solid-liquid separation filter
• Filtration Equipment

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery workspaces, and material storage areas use ground plates. Traditional steel plates are heavy, requiring large machinery for installation and removal, which can make work difficult in narrow sites. Hyper CLT ground plates are lightweight civil engineering CLT materials made from wooden CLT for civil use. A 5×10 plate weighs about 230 kg, and a 5×20 plate weighs about 460 kg, making them easy to handle even with small machinery, thus reducing the burden of transportation, installation, and removal. They are easy to use in sites with limited space or where the use of large machinery is difficult. They can be widely used for temporary roads, heavy machinery scaffolding, pathways within the site, and material storage protection, contributing to glare reduction, noise reduction, and environmental consideration. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended as materials for innovative ideas and safety measures in public works.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!