Detect abnormal temperatures in distribution board equipment / Temperature detection sensor for distribution boards

Optimal safety measures for abnormal temperatures in distribution board equipment / New product for distribution board alarm system

■Features of the Distribution Board Alarm Device 1. Temperature sensing wire (80℃) is wired to the distribution/control panel equipment, allowing for monitoring and alarming of abnormal temperatures. 2. Abnormal temperatures in the distribution/control panel equipment are monitored continuously on a daily basis, enabling early detection and safe response. 3. Inspection and maintenance of the distribution/control panel equipment can be performed reliably and safely. 4. This is an optimal "distribution board alarm device" for safety measures against abnormal temperatures in distribution/control panel equipment. 5. It is a "distribution board alarm device" that combines a compact alarm panel with a temperature sensing wire (80℃). 6. This product meets the performance standards of a fixed temperature type detector (120 seconds) as specified by fire safety regulations. ◆Features of the Temperature Sensing Wire 1. It can directly sense temperature and emit signals through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80℃), the two wires short-circuit to sense the temperature and generate a signal. 3. It can be wired similarly to electrical equipment wiring and can be used for both indoor and outdoor wiring. 4. This product integrates numerous shape memory alloys at equal intervals along the wire. 5. It is simple, easy, and accurate, utilizing eco-technology with zero standby power through its switching function.

• power supply
• Control Panel
• Distribution Board

Monitoring and alarming of dangerous temperatures in various industries / New product for dangerous temperature alarm devices.

■Features of the Dangerous Temperature Alarm Device 1. Capable of monitoring and alarming various dangerous temperatures (80°C) across different industries. 2. Can be installed in areas at risk of dangerous temperatures to monitor and alarm for dangerous temperatures, with the ability to relay signals. 3. Allows for continuous daily monitoring of various dangerous temperatures in each industry, enabling early detection and safe response. 4. An eco-friendly "dangerous temperature alarm device" that anyone can easily install, with zero standby power. 5. A new type of "dangerous temperature alarm device" that combines an alarm panel with a temperature sensing wire (80°C). ◇Features of the Temperature Sensing Wire 1. Can directly sense temperature and emit signals through physical operation without the need for a power source or measuring equipment. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Can be wired similarly to electrical wiring. It can be used for both indoor and outdoor wiring. 4. The shape memory alloy has permanent memory, is rust-free, and retains its state once activated, allowing for long-term use. 5. This product meets the performance standards of fixed temperature type detectors as specified by fire safety regulations (120 seconds). 6. Non-resettable, allowing for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

New product for temperature sensing wire for monitoring abnormal temperatures of electrical wires in electrical equipment.

■Features of Temperature Sensing Wires for Electric Cables 1. Attach the temperature sensing wire for electric cables to the electric wire using a spiral tube or similar method to monitor abnormal temperatures in the wire. 2. Attach the temperature sensing wire for electric cables to control devices and load devices using plastic bonds to monitor abnormal temperatures in the equipment. 3. Detect abnormal temperatures in electric equipment's wires, control devices, and load devices, preventing equipment damage and fires in advance. 4. Continuously monitor abnormal temperatures in electric equipment on a daily basis, ensuring reliable and safe maintenance management. 5. Safety management of electric equipment can be performed even by those who are not electrical engineers. ■Characteristics of Temperature Sensing Wires for Electric Cables 1. Direct temperature sensing and signaling can be achieved through physical operation without the need for power sources or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Wiring similar to that of electric equipment can be performed. Additionally, it can be used for both indoor and outdoor wiring.

• power supply
• Control Panel
• Distribution Board

New product of temperature sensing wire integrated with multiple temperature memory sensors.

■Features of Temperature Sensing Wire 1. Direct temperature sensing and signal generation through physical operation without the need for power supply or measuring instruments. 2. When the surrounding temperature reaches the set temperature (80°C), the two wires short-circuit to sense the temperature and generate a signal. 3. Various abnormal temperatures can be monitored collectively on a daily basis, ensuring reliable and safe maintenance management. 4. Early detection of abnormal temperatures in various devices can prevent equipment damage and fires. 5. By simply extending the wiring, a wide range of abnormal temperature monitoring can be achieved. 6. Wiring similar to that of electrical equipment can be done, and it can be used for both indoor and outdoor wiring. 7. This product integrates numerous shape memory alloys at regular intervals along the extended wire. 8. Utilizing the softening of the wire and the recovery of the shape memory alloy, it senses temperature by short-circuiting the two wires and generates a signal. 9. It is a simple, easy, and accurate eco-technology product with zero standby power due to its switching function. 10. The shape memory alloy has permanent memory, is rust-free, and retains its state indefinitely once activated, allowing for long-term use. 11. This product meets the performance standards of fixed temperature type detectors (120 seconds) as specified by fire safety regulations. 12. It is a non-resettable type that allows for confirmation after activation. (Once activated, it cannot be reactivated. The activated location can be deleted and reconnected.)

• Sensors
• Sensors
• Safety Sensors

Detect abnormal temperatures in distribution board equipment / Temperature detection sensor for distribution boards

■Features of Temperature Detection Sensors for Distribution Boards 1. Continuously monitors and detects abnormal temperatures of electrical wires in the distribution board. 2. Continuously monitors and detects abnormal temperatures of power (control) equipment and electrical (load) equipment in the distribution board. 3. Inspection tasks for distribution board equipment can be performed by anyone, ensuring reliable and safe maintenance management. 4. Utilizes shape memory alloy (restoration) and electrical wires (softening) to create a short circuit (contact) between the two wire cores, detecting abnormal temperatures (maximum allowable temperature) and generating a signal. [Set temperature: 80°C] 5. A simple, easy-to-use product with good accuracy, featuring eco-friendly technology with zero standby power due to its switching function. 6. Capable of simultaneous temperature detection and signaling, with a simple circuit configuration (switching function) at a low cost. 7. Shape memory alloy has permanent memory, is rust-free, and retains its function indefinitely once activated. 8. Operates through a physical action that requires no power, ensuring no malfunction and allowing for swift, accurate use over many years. 9. Enables direct temperature detection without the need for measuring instruments. 10. Non-resettable, allowing for confirmation after activation. (Once triggered, it cannot be reactivated. The activated location can be deleted and reconnected.)

• power supply
• Control Panel
• Distribution Board

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.