★Techne Measurement★ WEB Announcement of the addition of the "UK SHAW Dew Point Meter" page

★SDT Dew Point Transmitter Successor★

● 2-wire type, supply voltage 12-28 VDC ● Accuracy ±2℃ ● Linear output of dew point (analog 4-20 mA , Modbus RTU) ■ The AcuDew dew point transmitter is the successor to the well-received SDT dew point transmitter, developed with the use in the trace moisture range (-100 ℃dp to -70 ℃dp) in mind. The standard measurement range is -100 ℃dp to +20 ℃dp, with an accuracy of ±2 ℃dp. ■ AcuDew is powered by a supply voltage of 12 to 28 VDC and is configured to output an insulated linear 4-20 mA signal over distances of up to 1,000 meters (3,280 feet). ■ AcuDew is housed in a robust enclosure that meets the dust and water resistance standard IP66.

• Thermo-hygrometer

This is a three-wire dew point transmitter developed for measuring dew points in explosion hazard areas!

●Certified for intrinsic safety explosion-proof according to ATEX and IECEx standards ATEX: II 1 GD Ex ia IIC T4 Ga (-20 °C ≤ Ta ≤ +60 °C) IECEx: Ex ia IIIC T200135°C Da (-20 °C ≤ Ta ≤ +60 °C) ●Common GND 3-wire type, power supply 7-28 VDC ●Linear output of dew point (analog 4-20 mA) ■The UK company SHAW's SDT-Ex explosion-proof transmitter is a 3-wire dew point transmitter developed for measuring dew points in explosive hazardous areas. It has obtained explosion-proof certification with European certification (ATEX) and international certification (IECEx). ■The SDT-Ex is powered by a voltage of 7 to 28 VDC and is configured to output an insulated linear 4-20 mA signal over a distance of up to 1,000 meters (3,280 feet). ■It covers the entire range of dew points from -100 °Cdp to +20 °Cdp and can measure across various dew point ranges. ■Housed in a robust enclosure, it complies with the dust and water protection standard IP66.

• Temperature and humidity measuring instruments

It is a portable type dew point meter with a high response speed function!

● High response speed achieved with the drying agent dry chamber ● 10 language options (including English and Japanese) ● Rechargeable battery - over 150 hours of continuous operation on a full charge ● Handy size that can be held with one hand, weighing 1.75 kg ● Explosion-proof certified products available, as well as non-explosion-proof options ■ The UK SHAW SDHmini handheld dew point meter is the successor to the company's SADP portable dew point meter. ■ It retains the advantages of the SADP, such as high response speed functionality using the dry chamber, while being compact and lightweight enough to be held with one hand, featuring a full-color LCD display and optional logging functionality, making it ideal for spot checks of industrial gases and compressed air. The SADP was well-received for its ease of operation. SHAW places great importance on user-friendliness, and the operation of the display section is user-friendly and simple, allowing immediate use right after acquisition. It is equipped with a rechargeable lithium-ion battery, enabling 150 hours of continuous operation after charging.

• Other temperature and humidity measuring instruments

It's a portable device with a high response speed for low dew points!

● Low dew point measurement using a dry chamber ● High response speed ● Easy operation ● Simple battery check ● Selection from five types of sensors ● Calibration possible on-site ■ The SADP portable dew point meter manufactured by SHAW in the UK has been a best seller in portable low dew point equipment for over 50 years due to its high response speed and ease of use. ■ By storing the dew point sensor in the dry chamber when not in measurement mode, it allows for quick spot check measurements at all times. It can be used for both spot checks and continuous operation, and is particularly strong in measuring low dew points. ■ The display panel on the front of the unit allows you to see the dew point value, making it easy to check the measurement status of the device. Additionally, you can switch between OFF, battery check, and measurement simply by turning the rotary switch on the front of the device. ■ This device features an auto-calibration function, allowing users to perform calibration themselves before use. Furthermore, with a long-lasting battery, it can be used for 1 to 2 years under normal usage, and users can also check the battery life themselves. The remaining battery level can be checked at a glance.

• Temperature and humidity measuring instruments

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.