Heganes Japan will exhibit at the "2024 YOKOHAMA Automotive Technology Exhibition."

High-quality materials made from scrap of luxury automobiles, featuring excellent environmental performance.

Heganes Atomized Iron Powder is an extremely high-quality material made from high-grade automotive scrap, known for its excellent environmental performance. It is also used as the base iron powder for our high-strength low-alloy steel powder, Distalloy.

• Steel
• Other metal materials

Received outstanding trust as the global industry standard and widely adopted beyond powder metallurgy applications.

Heganes reduced iron powder is the root of Heganes iron powder and is produced using the original technology known as the "Heganes reduced iron powder method." It has a history of over a hundred years and boasts the largest production capacity in the world. It has gained exceptional trust as the global industry standard and is widely adopted beyond powder metallurgy applications.

• Steel
• Other metal materials

A very stable and easy-to-use material that flexibly responds to engineering conditions.

Heganes partial diffusion low alloy steel powder Distalloy has been a pioneer in partial diffusion low alloy steel powder and has received much support as a world standard since its development. It is an extremely stable and easy-to-use material that flexibly adapts to process conditions.

• Steel
• Other metal materials
• others

Heganes low-alloy steel pre-alloy powder Astaloy offers a rich variety including Fe-Mo, Fe-Cu, Fe-Ni-Mo, and Fe-Cr-Mo systems.

Heganes low alloy steel pre-alloy powders, such as Fe-Mo, Fe-Cu, Fe-Ni-Mo, and Fe-Cr-Mo systems, are available in a wide variety. They are characterized by achieving a homogeneous structure, excellent hardenability, and a high sinter hardening effect.

• Steel
• Other metal materials
• others

Proposal for replacement from Fe-Cu-C materials! Also compatible with the increasing demand for recyclability in the future.

"Astaloy CrS" is a low-Cr fully alloy powder that meets sustainability requirements. This product is an atomized low-Cr fully alloy powder made from iron scrap, and when sintered in a hydrogen/nitrogen atmosphere, it exhibits mechanical properties equivalent to those of Fe-Cu-C materials. Additionally, due to the absence of Cu, it is expected to have high dimensional stability and improved yield. Astaloy CrS is a material with low CO2 emissions. Heganes aims to achieve virtually zero CO2 emissions from Astaloy CrS by 2037, contributing to the reduction of CO2 emissions in the manufacturing of sintered parts in the future! 【Features】 ■ Sustainable/Recyclable ■ Mechanical properties and machinability equivalent to (or better than) Fe-Cu-C ■ High dimensional stability *For detailed specifications, please download the PDF. Feel free to contact us for more information.

• Other metal materials

We provide the optimal varieties to match the characteristics of individual filters and diverse requirements.

This is an introduction to the applications of sintered stainless steel filters made from iron powder, handled by Heganes Japan Co., Ltd.

• Steel
• Other metal materials

Electromagnetic design introduction of an axial flux motor can be downloaded for free!

A design report for an axial flux motor that effectively utilizes the three-dimensional magnetic properties of the soft magnetic composite "Somaloy(R)" has been made publicly available on the website of JMAG, an electromagnetic field analysis software provided by JSOL Corporation. 【Items included in the design report】 - Description of "Somaloy(R)" material and overview of core manufacturing process - Concept of axial flux motor - Abstract of motor SPEC, shape, material of each component, coil pattern - Motor performance simulation results 【Specifications Overview 12 slots / 10 poles open slot】 SSAFM DSAFM Maximum output 4.9kW 7.7kW Rated torque 3.1Nm 5.1Nm Speed 6000rpm 6000rpm Dimensions 110mm 110mm Shaft length 41mm 66.2mm ★ The design report can be downloaded for free with a free registration on the JMAG site ★ Even those who are not JMAG users can download it by registering for free, so please access the hyperlink to the official JMAG website below. *If you want the JMAG model, please contact us. ↓ JMAG Official Website Link ↓

• Other motors

Soft Magnetic Composites help to reduce the eddy current loss at high frequency! ☆ Easy modeling of 3D complex shapes ☆

"Somaloy(R)" is our soft magnetic composites product, made of pure iron powder with an insulating coating. Our products help the designing of components with three-dimensional shapes and three-dimensional magnetic properties. It is particularly useful for the development and manufacturing of high-spec soft magnetic cores required for miniaturization and high output in applications such as electric vehicles. 【Features】 - High compressibility allows for high permeability. - Enables three-dimensional magnetic circuit design, achieving miniaturization, lightweight, and cost reduction of products. - An insulating coating on pure iron powder results in low eddy current loss characteristics, achieving high efficiency in high-frequency ranges! - Complex shapes can be formed without secondary processing through net shaping (three-dimensional mechanical shapes that can be formed with uniaxial pressure). 【Grades】 - We offer a range of products covering frequencies from 100Hz for motor applications to up to 100kHz for reactor applications. ★ A catalog of "Somaloy(R)" is available for download via the button below.

• Inductor Coil
• PM motor
• Other metal materials

A must-see for those struggling with miniaturizing motors! Ideal for pancake structure high-torque ultra-flat axial gap motors, etc.!

"Somaloy(R)" is a soft magnetic material made from pure iron powder that has been developed and insulated by our company. We enable innovative motor designs that are not constrained by the limitations of electromagnetic steel sheets, providing solutions to many challenges faced by our customers. 【Matching of Axial Gap Motors (Axial Flux Motors) Topology with "Somaloy(R)"】 　　■ Net shaping (3D mechanical shapes that can be "unidirectionally pressed") 　　■ Realization of freedom in 3D magnetic circuit design 　　　☆ Achieving compact, lightweight, and low-cost designs that were difficult with conventional electromagnetic steel sheets☆ 【Grades】 　Covers from below 100Hz to 100kHz 【Examples of Advantages for Electric Motors】 　 Reduces dimensions and weight by up to 60% ☆ Technical design support for axial gap motors is also underway☆ 　・ 3D magnetic circuit analysis using JMAG 　・ 3D CAD modeling 　・ Optimization using Mode Frontier 　・ Winding design 　・ Strength analysis 　　 We will design according to your requirements. Please feel free to contact us. 　★ Catalogs for axial gap motors using "Somaloy(R)" are currently being distributed ★

• PM motor
• Other motors
• Other metal materials

Realizing lower loss with pure iron-based powder!

"Somaloy(R)" is our product name of soft magnetic composites made of pure iron powder with an insulating coating, developed by our company ahead of the world. [Main Needs for Automotive Reactors] - Low cost - Low loss - Low Volume [Features and Benefits of Somaloy] - Each particle of pure iron base powder is coated with an insulating layer, significantly reducing eddy current loss in the high-frequency range. - Being based on pure iron, it achieves high compressibility and easy handling, resulting in improved manufacturing efficiency. [Suitable Application Examples] - Boost reactors for DC/DC converters There is a proven track record of mass production of automotive boost reactors using "Somaloy(R)"! ★ We are currently offering the "Somaloy(R)" catalog without exception! ★ We can introduce high alloy powders with insulation coatings as well. If you have any questions, please feel free to contact us♪

• Inductor Coil
• Other electronic parts
• Other metal materials

Recently, we held technical training sessions for the MilkoScan FT3 at five locations nationwide. In this training, we provided a wide range of useful information for operating the equipment, including explanations of the principles and structure of the device, how to create measurement products, daily maintenance, and how to respond to issues when they arise. Additionally, this year we introduced new methods for utilizing digital services (such as FossCalibrator and IQX) and also prepared hands-on sessions where participants could experience operating the equipment using a PC. Thank you to everyone who participated. Please feel free to contact us with any questions after the training. ------- At Foss Japan, in addition to training sessions and workshops to ensure you can use our equipment with confidence, we hold many events throughout the year. In seminars and open houses tailored to specific industries and analytical techniques, we showcase Foss's latest analytical solutions. -------

[Lecturers] EY Strategy and Consulting Co., Ltd. Infrastructure Advisory Partner Kenichiro Fukuda Strategy Partner Ken Fujiyama Infrastructure Advisory Director Takashi Matsumura [Key Lecture Content] The water supply and sewage business is facing structural challenges such as facility aging, a shortage of workforce, and a decrease in revenue due to population decline. The government is promoting the introduction of Water PPPs, regional consolidation, and the digital transformation of water supply and sewage systems, marking a significant turning point in the way these businesses are operated. This change is expanding business opportunities for private companies in various areas, including operation and maintenance, pipeline renewal, digital technology, and the utilization of smart meters and data. Additionally, as a means of expanding business domains and enhancing competitiveness, there has been an increase in capital and operational partnerships and M&A between companies, leading to industry restructuring. In this seminar, based on the latest trends in policy and the market, we will introduce business strategies for private companies to enter and expand in the water supply and sewage market, including the use of M&A and capital operational partnerships, drawing on achievements from both public and private support.

[Lecturer] Koichi Iwama, Professor, Faculty of Economics and Management, Wako University / Chairman, Resource Economics Committee, Petroleum Technology Association [Key Lecture Content] In light of the prolonged crisis in the Strait of Hormuz, what will happen to the development of shale gas and shale oil in the United States moving forward? After the midterm elections, what will be the international LNG prices under the Trump administration after winter 2027? How will Japan's business strategies related to LNG projects grow? A leading expert on the shale gas and shale oil revolutions will clearly explain the future outlook.

[Lecture Items] 1. Initiatives for Promoting Smart Cities at the Ministry of Land, Infrastructure, Transport and Tourism Ministry of Land, Infrastructure, Transport and Tourism, Urban Bureau, International and Digital Policy Division, Digital Information Utilization Promotion Office Planning Specialist Mr. Masahiro Kobayashi 1. Initiatives to Promote the Spread of Smart Cities 2. Promotion of the Development and Utilization of 3D Urban Models in Project PLATEAU 3. Q&A / Business Card Exchange 2. Smart Cities in the AI Era - Creating "Light Cities" that Continuously Unleash the Potential of Urban Areas - NTT Urban Solutions Inc., Urban Development Promotion Headquarters, Innovation Promotion Department, Deputy Director NTT Urban Development Corporation, Digital Innovation Promotion Department, Director Mr. Shinya Date 1. Changes in the Environment Surrounding Smart Cities and the Transformation of Urban Development 2. NTT's Vision for Creating "Light Cities" - Urban Development that Continues to Unleash the Potential of Cities 3. Evolution and Value Creation of Smart Cities in an AI-Driven Society 4. Considering Future Urban Models and Co-Creation Possibilities from Social Implementation Cases in Hibiya 5. Q&A / Business Card Exchange

[Speaker] Mitsui & Co., Ltd. Research Institute, Technology and Innovation Information Department Senior Project Manager, Zhao Jian [Key Lecture Content] Low-cost lithium iron phosphate (LFP) lithium-ion batteries are expanding their adoption worldwide. To prepare for future mass emissions, promoting their recycling is essential. However, due to the low material value of LFP batteries, ensuring the profitability of recycling operations has become a challenge. In pursuit of profitability, Chinese companies are seeking economies of scale and integrating battery material manufacturing, while in Europe and other regions, there is a focus on developing high-efficiency and high-purity recovery technologies such as direct recycling. This lecture will explain the current status, challenges, latest trends in technology development, and the impact on the battery supply chain regarding LFP battery recycling. [Lecture Items] 1. The necessity of LFP battery recycling 2. The current status of LFP battery recycling 3. Efforts to improve the profitability of LFP battery recycling 4. Impact on the supply chain & summary 5. Q&A / Business card exchange