The Plasteco-made [Inert Gas Quantitative Supply Device] has been made smaller, lighter, and more compact compared to the conventional model!

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

An automatic quantitative supply system for main materials (raw materials) and auxiliary materials (additives, etc.) that can be linked to an extrusion molding machine! Precise control of the raw material addition rate is possible!

This is a feeder that quantitatively supplies the main material (raw material) and auxiliary materials (additives, etc.) to the extrusion molding machine. It precisely controls the main feeder for the main material, the sub-feeder for the auxiliary material, and the gas (foaming agent), linking their respective addition rates. By combining it with Plasteco, a manufacturer specializing in inert gas foaming, extrusion molding machines, dehumidifying dryers with stirring, gas supply units, etc., it is possible to construct a "supercritical inert gas extrusion foaming system" that is more suitable for foaming.

• Powder Supply Device

Manufacturing of a complete set of molding systems and peripheral equipment, as a specialized manufacturer of safe, low-cost, and environmentally friendly foaming agents and inert gases (CO2, N2).

Plasteco Co., Ltd. is the world's only manufacturer specializing in foaming using inert gases (CO₂, N₂). We are capable of manufacturing a complete set of equipment, including supercritical inert gas extrusion foaming molding systems, gas quantitative supply devices, and dryers. Leveraging our long-standing experience and know-how cultivated through numerous sales achievements, we provide consistent and flexible support from raw materials to molding. ● Safe and inexpensive foaming agents ● High added value through ultra-fine foaming ● Reduction of greenhouse gases ● Raw material reduction through high expansion foaming ● Foaming of new materials such as biodegradable options is possible ● Comprehensive support from raw materials to molding

• Extrusion Machine

[Environmental Consideration] Core material for tatami made from plant-based, earth-friendly, foam PLA material with excellent insulation, antibacterial, and moisture-proof properties [Carbon Neutral]

Foamed PLA (polylactic acid) is a material with lower environmental impact than conventional materials such as foamed polystyrene and other foamed plastics, as it is plant-based and biodegradable. Additionally, thanks to Plasteco's unique supercritical inert gas foaming technology, there are no residues like those from chemical foaming agents, and it is foamed and molded using methods that have a low global warming potential, making it an environmentally friendly product from raw materials to molding processes. The fine bubbles of PLA (bubble diameter 10-30μm) and the independent bubbles provide excellent thermal insulation, moisture resistance, and antibacterial properties, while also preventing the occurrence of dust mites and other pests from the tatami base. It also has soundproofing properties, creating a comfortable living environment.

• Other polymer materials

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.

Technoa Co., Ltd. (Headquarters: Gifu City, Gifu Prefecture, Representative Director: Koji Yamazaki) will hold a limited-time summer special event, "Monozukuri DX CAMP," from Saturday, August 9, 2025, to Saturday, August 23, 2025. Small and medium-sized manufacturing companies face challenges such as a shortage of specialized personnel and a lack of know-how and information, which act as barriers to promoting DX (digital transformation). This event will provide a step-by-step approach to "realistic DX," based on the know-how accumulated by Technoa while supporting the DX transformation of small and medium-sized manufacturing companies. It will be structured as DAY.1 to DAY.5, offering an opportunity for skill development during the summer break and supporting the learning and growth of small and medium-sized manufacturers. For more details, please refer to the related link.

JOHNAN has updated a webpage summarizing the selection points to solve various challenges in large-scale processing (quality maintenance, short delivery times, costs). This article introduces the challenges faced in large-scale processing based on years of knowledge and experience, as well as the key points for choosing the optimal contractor that balances quality and short delivery times. If you are looking for a reliable contractor, please make use of our "Large-Scale Processing Solutions." ▼For more details "Large-Scale Processing Solutions to Achieve Product Quality and Short Delivery Times" https://www.johnan.com/solution/process/processing-assembly/post_8.html

Thank you very much for your continued support. We sincerely apologize for the inconvenience, but our company will be closed for summer vacation during the following period. 【Closure Period】 From Saturday, August 9, 2025, to Thursday, August 14, 2025. We will resume normal business operations on Friday, August 15. We appreciate your understanding during this time and apologize for any inconvenience caused.