We will be exhibiting at the Adhesive and Bonding Technology Exhibition 2024 held on May 24, 2024.

This is a surface treatment technology that dramatically improves the adhesion of fluororesin films and polyimide films, which have been considered difficult to bond until now.

At Kawamura Industries, we apply plasma treatment to films, metal foils, non-woven fabrics, and more, performing surface modifications such as hydrophilization and hydrophobization. This treatment significantly improves the adhesion of various films and allows for the removal and purification of organic substances from the substrate surface. It can effectively remove residues such as rolling oils that are difficult to completely eliminate with wet cleaning. Additionally, it is possible to bond various materials together without the use of adhesives. **Features of Kawamura Industries' 'Vacuum Plasma Treatment'** - Dramatically improves adhesive strength - Effectively removes rolling oils and organic substances, purifying the surface - Enables adhesive-free bonding of various materials - Selects suitable gas types and plasma treatment conditions for each project - Treatment effects last for an extended period - Continuous processing is possible with roll-to-roll technology *For more details, please refer to the PDF document or feel free to contact us.*

• Surface treatment contract service

Achieving adhesive-free laminating processing through the integration of plasma treatment technology!

At Kawamura Industries, we perform thermal lamination processing using large press equipment and continuous thermal lamination devices. This is carried out in a clean room, and adhesive-free lamination processing of materials treated with plasma is also possible. Please feel free to consult us regarding contract processing! 【Features of Kawamura Industries' 'Thermal Lamination'】 　■ High-temperature bonding (Max 400℃) of sheet materials, etc., is possible using vacuum thermal press equipment. 　■ Roll-to-roll bonding is possible using continuous thermal lamination equipment. *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract
• Surface treatment contract service
• Other contract services

The "vacuum hot press," which can also perform surface treatment in the previous process, and the "coating" technology for metal foils are suitable for the processing of electronic materials such as substrates for 5G and base materials for planar heating elements!

At Kawamura Industries, we develop and manufacture materials for electronic applications and provide associated processing technologies. We will introduce technologies that have a proven track record for substrates used in 5G and for planar heating elements. 【Our Technology: Electronic Materials - Strengths of Vacuum Heat Press Coating Technology】 ■ Vacuum Heat Press In prototype and mass production using vacuum heat pressing, we can press without adhesives, allowing us to better utilize the inherent properties of the materials. (Note: We can also accommodate laminated products with adhesives.) - We have a large number of press machines, capable of handling various sizes and temperatures. - There are press machines installed in a cleanroom environment. ■ Resin Coating on Metal Foils Although we operate in a contract processing format, we can combine "metal foil + high-temperature treatment." - Our coating drying oven can handle temperatures up to 260°C, allowing for the drying of high-boiling point solvents. - We can also accommodate polyimide coatings with a high-temperature curing oven that can handle up to 400°C. Including material procurement, we provide consistent support from small lots and prototypes to mass production, so please feel free to contact us. *We are currently publishing an introductory document summarizing what Kawamura Industries can do! You can view it immediately via [PDF Download].

• Press Dies
• Other painting machines
• Surface treatment contract service

[Presentation of 4 Technical Introduction Materials] We respond from prototyping to mass production! We also support material procurement. We accommodate electronic materials that require high functionality, such as those for 5G products.

At Kawamura Industries, we create and provide electronic materials with various functions by integrating processes such as slitting, plasma surface treatment, sputtering, and thermal lamination. We can handle everything from prototyping to mass production, including material procurement. We welcome inquiries for small lot requests as well. 【Our Technologies】 ■ Slitting With about 50 years of extensive experience, we can accommodate slit widths from 2mm to 2,000mm. We can process in clean rooms as well as in yellow rooms. ■ Plasma Surface Treatment Effective for improving the adhesion of low-adhesion films like fluorine films. Our roll-to-roll equipment allows for rapid mass production startup. ■ Thermal Lamination We have a vacuum thermal press capable of handling high temperatures up to 400°C within a clean room. Our laminating machines can also operate in a clean environment from the preparation stage. ■ Sputtering We possess roll-to-roll equipment. In collaboration with partner companies, we can also perform electrolytic copper plating on sputtered materials using roll-to-roll methods. *You can view technical documents and introductory materials regarding the above processing technologies from the <PDF Download>. Please feel free to contact us with any inquiries.

• Processing Contract
• Surface treatment contract service
• plastic

It is a heat-resistant laminated board that integrates polyimide film without adhesive.

Kawamura Industries' "Polyimide Laminate (PI-Plate)" is a laminate made by layering and thermally bonding polyimide film that has been activated on its surface through plasma treatment. **Features of Kawamura Industries' "Polyimide Laminate"** - Excellent heat resistance due to being adhesive-free → Continuous: 200°C / Short-term: 400°C - Exhibits excellent mechanical properties derived from polyimide film - Laminates can be produced in sizes up to 480mm x 1,100mm - Maximum thickness of 10mm (proven) *Please feel free to consult us regarding thicknesses over 10mm. *For examples of properties, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other polymer materials
• Other contract services

It is a material with excellent heat resistance, oil resistance, and hydrolysis resistance, eliminating the need for adhesives. Suitable for insulation applications in EV/HEV vehicles!

Kawamura Industries' "Namil" is a material that is directly bonded without the use of adhesives, thanks to our unique plasma surface treatment and thermal lamination technology. Since it is manufactured through a process that does not use any adhesives or solvents, there are no emissions of volatile organic compounds (VOCs), contributing to the reduction of environmental impact on the Earth. By using aramid paper on both sides, we enhance heat resistance and varnish impregnation, and by using PPS film in the intermediate layer, we improve hydrolysis resistance. It is also possible to produce a high heat-resistant grade using polyimide film for the intermediate layer. **Features of Kawamura Industries' "Namil":** - Excellent heat resistance due to being adhesive-free - Thin and excellent thermal conductivity due to being adhesive-free - Superior varnish impregnation due to the use of aramid paper on the surface - Excellent oil resistance and hydrolysis resistance. *For more details, please refer to the PDF document or feel free to contact us.*

• Composite Materials
• Other polymer materials
• Paper and pulp products

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We will be exhibiting our products at "JECA FAIR 2026 (the 74th Electrical Construction Exhibition)" held at Tokyo Big Sight. At this exhibition, we will be jointly exhibiting with Mibu Electric Manufacturing. Our booth will focus on the "Panel Manufacturing Skill-less Solution," which addresses the labor shortage issues in panel manufacturing that have required skilled workers, enabling less experienced operators to achieve high-quality manufacturing in processes such as wire processing, component assembly, and wiring work. We will also introduce various other products. We invite you to visit our booth during your visit. ■ Exhibition Name: JECA FAIR 2026 (the 74th Electrical Construction Exhibition) ■ Location: Tokyo Big Sight, Halls 1-3 ■ Booth Numbers: 1-01 ECAD Solutions, 1-02 Joint Exhibition with Mibu Electric Manufacturing ■ Dates: May 27 (Wednesday) - May 29 (Friday), 2026, for three days ■ Hours: May 27 (Wednesday) 10:30 AM - 5:00 PM May 28 (Thursday) 10:00 AM - 5:00 PM May 29 (Friday) 10:00 AM - 4:30 PM *For more information about the exhibited products, please download the materials. Feel free to contact us with any inquiries.

We would like to express our gratitude for your continued support and announce a campaign where you can purchase consumables at a great price. We will offer various consumables that need to be replaced regularly for high-precision and stable analysis, as well as safe decomposition work, at a special price of 20% off. For more details, please refer to each leaflet.

We will be temporarily closed on the following dates due to employee training. We apologize for any inconvenience this may cause and appreciate your understanding. ■ Closure Period June 11 (Thursday) to June 12 (Friday), 2026, all day ■ Regarding Orders 1) Orders placed after June 10 (Wednesday) will generally be shipped on or after June 16 (Tuesday) or June 17 (Wednesday). 2) Orders can be placed anytime on the 【FOSS WEBSHOP】. The official delivery date will be communicated after June 15 (Monday). 3) Please specify your "desired delivery date" when placing an order. 4) In case of emergencies, please contact us not only by sending the order form but also by phone. ■ Regarding Customer Support During the closure, any malfunctions or issues will be accepted via email or voicemail. Please provide detailed information including "model name," "serial number," "symptoms," "contact person's name," and "contact information." Our customer support will contact you in the order of receipt. E-Mail: service@foss.co.jp Contact: 03-5962-4811 Reception Hours: 9:00 AM to 5:00 PM