Quickly absorb water to prevent slipping! Introducing our condensation prevention series.

Quickly absorbs water to prevent slipping accidents caused by condensation. Recommended for areas with condensation on doors and walls, as well as water leaks at entrances, walkways, and ramps.

■Is there condensation on the walls, causing water to drip? 【For water wetting due to condensation on doors and walls!】 The walls of cold storage and refrigerators tend to condense, especially around the door area, and the condensed moisture flows down the walls to the floor. By installing Pig Anti-Mildew Socks or Pig Absorbent Mats, moisture is effectively absorbed, preventing it from spreading on the floor. ■Is the passageway slippery due to moisture from condensation or frost? 【For water wetting at entrances and passageways, preventing falls!】 Near the doors and passageways of cold storage and refrigerators, frost and moisture can be brought out from inside, leading to a soaking wet area if left unattended. By installing Pig Grippy Floor Mats that effectively absorb moisture from shoe soles, we can prevent soaking and slips that may lead to falls. ■Is the slope slippery due to water from condensation? 【For water wetting on slopes, preventing falls!】 In cold storage and refrigerators with slopes, if moisture remains on the slope, it can become slippery, posing a risk of falling. The Pig Grippy Floor Mat, with its adhesive backing, can be installed without the need for fixing tape, effectively absorbing moisture and providing a solution to prevent falls on the slope.

• Food storage equipment and facilities
• Other consumables
• Other safety and hygiene products

A water-absorbing mat made from recyclable cellulose material that can be reused, designed with consideration for the environment, perfect for places struggling with water!

This is a water absorption mat specifically designed to quickly and efficiently absorb large amounts of water in areas troubled by water leaks from rain, condensation from pipes and ducts, and more. 【Product Details】 - After absorbing water, it can be wrung out and reused. - Made from environmentally friendly recycled cellulose material. - Each mat absorbs approximately 858 mL of water. - It can be used in a wide range of situations, including flood prevention, leak prevention, and rain leak prevention.

• Other consumables

We introduce many products that are active before and after the occurrence of leakage incidents! They enable quick responses and minimize damage.

We offer a wide range of 'liquid leakage countermeasure products' to minimize damage in the event of a leak of liquid hazardous materials. 【Product Lineup】 ■ Liquid Leakage Countermeasure Kits Pig Spill Response Bag: A set of absorbent materials that can quickly absorb approximately 40 liters of liquid. Pig Clear Spill Kit: A set of absorbent materials that can quickly absorb approximately 20 liters of liquid. ■ Limiting the Spread of Liquid Drain Blocker: Seals the entrance of drains to prevent the inflow of water, oil, and various chemicals. Oil Fence: Encloses oil that has leaked onto the water surface and absorbs only the oil. ■ Leakage Accident Measures Rigid Lock Quick Barm: Prevents the spread of liquid leaks from drums. Can be folded for compact storage. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other consumables
• Other cleaning tools
• Other safety and hygiene products

A clean, reusable, aesthetically pleasing sock-like absorbent material for water. It can be used to prevent water leaks and condensation from refrigerators, freezers, and cold cases.

- Made of polypropylene, it has the effect of suppressing mold growth, allowing for safe use over a long period. - By squeezing out the absorbed water and allowing it to air dry, it can be reused. Please avoid sun drying or using a dryer. Reuse is recommended up to three times. - Even after reuse, it maintains its shape well and is less prone to bacterial growth, which helps to reduce odors. - It is flexible and fits well around the refrigerator and in corners. - The polypropylene cover is resistant to tearing and is durable.

• Other consumables
• Other safety and hygiene products
• others

Are you placing drums containing oil or liquid hazardous materials directly on the floor of the oil storage or waste oil storage area?

Placing liquid storage containers such as drums directly on the floor or on wooden pallets can be very dangerous, as any leakage could cause the liquid to spread directly on the floor of the site or storage area. The 'Rigid Lock Quick Berm' solves this danger! 【Features】 ■ Prevents the spread of liquid leaks from drums. ■ When the wall is lowered, it allows for entry by forklifts or hand forks. ■ Suitable not only for containers but also for storing generators and vehicles. ■ Can be folded down to a compact size, making it easy to store. ■ Convenient for sudden layout changes. ■ Excellent oil and chemical resistance. ■ Flame-retardant compliant. 【Examples of Berm Usage】 1. During layout changes of drums, etc. 2. During routine maintenance or scheduled repairs. 3. As an emergency leak response measure. 4. For oil leak prevention from piping. *For more details, please contact us or refer to the PDF data.

• palette
• Other safety and hygiene products
• palette

Over 200 types of products! Absorbent materials that keep factories clean and safe from leaks of oils and hazardous liquids.

The "Pig Comprehensive Catalog" is a comprehensive catalog from A.M. Products, which manufactures absorbent materials that contribute to creating a safe and clean environment in factories. Pig absorbents are easy to install and help keep the worksite clean, leading to reduced cleaning time and costs. We offer a range of absorbents tailored to various applications, including "Pig Tough Mat Green," which keeps walkways dry and clean, as well as absorbents for oil, liquids, and hazardous liquids.

• mop
• Other safety and hygiene products
• mat

In civil engineering sites, there are many instances where temporary roads, access roads, heavy machinery work yards, and material storage areas use ground plates. While conventional steel plates are practical, they can sometimes fail to leave a lasting impression when it comes to the appearance of the site and conveying the company's initiatives. Hyper CLT ground plates are civil engineering materials that utilize wood CLT. As ground plates with the texture of wood, they can be used as a substitute for steel plates, for mud prevention, ground protection, and ensuring pedestrian pathways. By introducing them in visible areas such as site entrances, morning assembly locations, and around break areas, it becomes easier to create an impact that differs from traditional sites. The 5×10 plate weighs about 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce construction burdens. They also offer advantages such as glare reduction, noise reduction, and environmental considerations unique to wood, making them suitable for innovative public works projects. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they are recommended for companies aiming to create a distinctive impression at their sites. We can also provide consultation for small lot introductions and suggest usage methods tailored to site conditions. Why not add a clear change to your civil engineering site with these new wooden ground plates?

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

[To the owners of parking lots and parking lot construction companies] "I’m worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask that customers arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.