[Exhibition] June 26 to June 28 "26th Interphex Japan" Exhibition Information

The change in volume is small, and the discharge flow rate is stable.

<Features> 1. Compact with minimal liquid pooling 2. Small volume change in fluid pathways, resulting in good liquid drainage 3. Suitable for small volume filling 4. Actuator can be removed with four bolts

• valve

This is a diaphragm valve that achieves weight reduction through special processing.

<Features> 1. The flow path is straight. 2. There is no gland for shaft sealing. 3. It can be disassembled and assembled while the body is still piped. 4. Buff polishing is not used for the inner surface finish of the body. 5. Lightweight due to special processing of stainless steel.

• valve

Outstanding airtightness and significantly reduced maintenance frequency!

<Features> 1. The unique seal structure improves reliability against external leakage compared to conventional diaphragm valves. 2. Maximum operating pressure of 1MPa (However, the seat closing pressure under pressure on both sides is 0.6MPa). 3. Reduces flow variation. 4. Uses diaphragms that comply with USP Class 6 and FDA standards.

• valve

This is a valve suitable for fluids that dislike dead space, with low pressure loss.

<Features> ● Higher durability in steam than ball valves ● Achieves smooth fluid flow ● Grand structure based on know-how in high-temperature and high-pressure valve manufacturing ● Stable seat performance achieved with crimped disk packing

• Other work tools

It is a valve that can minimize the switching time between batches.

When replacing the tube or changing the size of the tube, there is no need to purchase a new valve as long as it is within normal operating conditions; the compressor can be easily adjusted with just a simple replacement of the tube holder.

• valve

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

This is a webinar aimed at programming beginners and those with no prior experience, designed to provide an opportunity to get started with programming in Igor Pro. We will introduce the fundamental knowledge necessary for the process of programming and building a unique user interface. If you have even a slight interest in automation or programming, or if you are considering utilizing it in the future, please join us. <Agenda> - Overview of Igor Pro - Goals of this webinar - Preliminary knowledge before programming - Structure of functions - Data types - How to assemble functions - Steps for creating a GUI - Linking GUI and functions - Sharing analysis tools For more details, visit here (to the Hue Links page) https://events.teams.microsoft.com/event/59e32793-449c-4af9-a909-a596c81b6786@aac33b62-1127-4ee9-a2f7-121fee7cfab8

While there are reports suggesting that the expansion of BEVs is slowing down, it remains unchanged that technological development is progressing globally towards increasing the ratio of electric vehicles (xEVs) in pursuit of carbon neutrality. In other words, the global trend is not to focus solely on BEVs but to increase all types of electric vehicles (xEVs), including HEVs, PHEVs, and FCEVs. The key components of electric vehicles (xEVs) are the motor, power control unit (PCU), and battery. Among these, the performance of the motor directly affects the performance of the vehicle. Thus, motor technology is fundamental to all electric vehicles (xEVs). This seminar will explain the basic technologies, performance, cooling, miniaturization, and high-speed advancements of motors used in electric vehicles (xEVs) and will look ahead to future trends. It will also discuss the recently expanding e-axle. The goal is to make this seminar a guiding reference for engineers involved in research and development related to electric vehicles.

Soundproofing materials made of porous materials such as fiber materials and polyurethane foam are used in automobiles, home appliances, and buildings to improve sound insulation. These materials can be used as a single type, but they are often layered with films or rubber in multiple layers. Additionally, in recent years, practical examples of acoustic metamaterials have been increasing. This will explain the mechanisms of sound absorption and sound insulation of these materials, as well as the latest prediction technologies using CAE and examples of their application in automobiles.

Our engineer with 10 years of experience in RPA will introduce hints for the "next step" in utilizing RPA. = For details and registration, click here = Ongoing until August 31, 2026 (Monday) https://www.nttd-bb.com/event/smn20260831.html?utm_source=ipros&utm_medium=other&utm_campaign=20260519_sales ☆ Date ☆ Ongoing until August 31, 2026 (Monday) ☆ Venue ☆ Online seminar, free of charge ☆ Seminar content ☆ [RPA "WinActor"] For those using RPA What are the methods for utilizing RPA in the AI era to expand the automation domain of your business? Our engineer with 10 years of experience in RPA will introduce hints for the "next step" in utilizing RPA. <Target audience> - Those currently using RPA - Those who want to take the next step in business automation with RPA - Those who want to know how to differentiate between RPA and AI - Those interested in generative AI, AI-OCR, and AI agents