Thank you for visiting the Electronics Equipment Total Solution Exhibition 2024 (JPCA Show 2024) / JISSO PROTEC 2024.

We will create new value through the mutual complementarity of ICT and BST.

In-circuit testing with a flying probe tester excels at inspecting the electrical characteristics of implemented electronic components in analog circuits. However, components that cannot be probed make electrical testing difficult, and functional testing of digital circuits is challenging. On the other hand, boundary scan testing allows for quick interconnection testing between LSI pins and on-board programming for FPGAs, but it can only test digital circuits around ICs that comply with the boundary scan standard, and it also requires specialized fixtures for connections. At Takaya Corporation, we possess technology that uses flying probes instead of fixtures to connect 4 to 5 scan-compatible pins and measuring instruments required for boundary scan testing. This allows for boundary scan testing even when the counterpart of a boundary scan-compliant IC is a non-boundary scan-compliant IC or passive components (such as connectors) by enabling the flying probe to function as a virtual boundary scan cell. With a single flying probe tester, it is possible to conduct comprehensive testing of both digital and analog circuits, thereby significantly enhancing testing efficiency compared to before.

• Circuit Board Inspection Equipment

We have won the 20th "JPCA Award"!

Takaya Corporation (Headquarters: Ibara-cho, Ibara City, Okayama Prefecture; President: Ryuji Okamoto) has received the 20th "JPCA Award" for its "Hybrid Inspection System Combining JTAG Testing and Flying Probe Testing." The awarded "Hybrid Inspection System Combining JTAG Testing and Flying Probe Testing" integrates the flying probe tester with JTAG boundary scan testing, allowing for the mutual complementarity of each inspection method to maximize test coverage for high-density mounted boards and enable more accurate fault diagnosis. A panel introducing the award will be displayed at the "JPCA Show 2024 (Total Solution Exhibition for Electronic Devices 2024)" held at Tokyo Big Sight from June 12 (Wednesday) to June 14 (Friday). Our company will also have an exhibition booth at the event, showcasing a live flying probe tester. We invite you to come and see it.

• Circuit Board Inspection Equipment

Thank you for visiting the Total Solutions Exhibition for Electronic Devices 2024 / JISSO PROTEC 2024.

Thank you to everyone who visited the Takaya Corporation booth at the "Electronic Equipment Total Solution Exhibition 2024 (JPCA Show 2024) / JISSO PROTEC 2024" held at Tokyo Big Sight from June 12 to June 14, 2024. We have made information about the products we exhibited available. If you have any questions or inquiries regarding the content, please feel free to contact us. Additionally, we received the 20th "JPCA Award" for our "Hybrid Inspection System combining JTAG testing and flying probe testers," and an introduction panel regarding this award was displayed at the venue.

• Circuit Board Inspection Equipment

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery workspaces, and material storage areas use ground plates. Traditional steel plates are heavy, requiring large machinery for installation and removal, which can make work difficult in narrow sites. Hyper CLT ground plates are lightweight civil engineering CLT materials made from wooden CLT for civil use. A 5×10 plate weighs about 230 kg, and a 5×20 plate weighs about 460 kg, making them easy to handle even with small machinery, thus reducing the burden of transportation, installation, and removal. They are easy to use in sites with limited space or where the use of large machinery is difficult. They can be widely used for temporary roads, heavy machinery scaffolding, pathways within the site, and material storage protection, contributing to glare reduction, noise reduction, and environmental consideration. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended as materials for innovative ideas and safety measures in public works.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!