CO2 Capture - Based on Research on Solar Cell Materials, Why are High-Precision Pressure Sensors Necessary?

High-precision pressure sensor with RS485 digital output. Atmospheric pressure range (800 to 1200 hPa) is also available!

The pressure sensor 33X achieves an extremely high accuracy of 0.05% full scale (FS) in the temperature range of 10 to 40°C through a mathematical correction method. An additional option for high precision of 0.01% FS is also available. In addition to a digital RS485 interface, analog current or voltage outputs can be obtained. 【Features】 - Accuracy of ±0.05% FS in the temperature range of 10 to 40°C - Standard dual outputs of digital RS485 and analog output - Analog output can be range-adjusted via digital RS485 - Available in barometric range type (800–1200 hPa) and differential pressure range type (from 0–30 kPa to 0–3 MPa) - Temperature range of -20 to 125°C (optional -40°C also available) - Excellent long-term stability 【Technology】 - Piezo-resistive pressure sensor - Correction technology using a mathematical model to produce accurate pressure values

• Pressure

Keller's software CC30 explained clearly in a video! (Japanese version of CCS30 available)

The license-free software CCS30 is used for recording settings and measurement values. It can be used with sensors from Keller with digital output RS485 (such as pressure sensors and level meters). Example) How to perform zero adjustment using the dedicated software CCS30 (very easy!) 1. Wire the device, open the software, and use "Search" in the upper right corner of the screen to recognize the sensor, then proceed to "Settings." 2. In the settings screen, check the current values and, if necessary, perform zero adjustment by clicking "Execute." [Measurement] - Real-time graphic display - Adjustable measurement and saving intervals - Export function - Connection to bus systems - Up to 100 measurement values per second [Settings] - Recall of information (pressure and temperature range, software version, serial number, etc.) - Re-adjustment of zero and span - Re-scaling of analog output (units, pressure range) - Adjustment of low-pass filter - Selection of instrument address and baud rate

• Pressure

Keller, known for its Swiss quality and precision, will directly support Japanese users!

On April 1, 2024, Keller Pressure Japan Co., Ltd. began its activities as the Japanese subsidiary of Keller. Moving forward, we will provide direct sales and support to our customers in Japan. Keller is a company that has developed and produced all its products at its factory in Winterthur, Switzerland, since its establishment. It is a leading manufacturer of pressure transducers and pressure transmitters and is ISO 9001 certified. As a core business, we manufacture and sell over 1.3 million pressure measurement cells annually, offering products with pressure ranges from 500 Pa to 200 MPa. Our extensive experience with all our products allows us to provide solutions for various applications. We have gained a high reputation as a manufacturer of high-precision pressure sensors and also accommodate OEM and custom products. We have received positive feedback from many customers. The establishment of a subsidiary in Japan is another important strategic step for Keller. Whether you are already using Keller products or are considering them for the first time, please feel free to contact us for inquiries! Contact: sales.jp@keller-pressure.com

• Pressure

In civil engineering sites, the use of sheet piling methods is essential for safely utilizing the site, including temporary roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates have been widely used, but due to their weight, they can be cumbersome to transport, install, and remove. Hyper CLT sheet piles are civil engineering materials made from wooden CLT for civil use. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to handle with small machinery, contributing to reduced burdens during installation and improved work efficiency. They can be utilized in a wide range of civil engineering sites for measures against muddy conditions, ground protection, heavy machinery scaffolding, and ensuring pedestrian pathways. As a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A," it is also recommended as a material for innovative ideas, safety measures, and environmental considerations in public works.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery workspaces, and material storage areas use ground plates. Traditional steel plates are heavy, requiring large machinery for installation and removal, which can make work difficult in narrow sites. Hyper CLT ground plates are lightweight civil engineering CLT materials made from wooden CLT for civil use. A 5×10 plate weighs about 230 kg, and a 5×20 plate weighs about 460 kg, making them easy to handle even with small machinery, thus reducing the burden of transportation, installation, and removal. They are easy to use in sites with limited space or where the use of large machinery is difficult. They can be widely used for temporary roads, heavy machinery scaffolding, pathways within the site, and material storage protection, contributing to glare reduction, noise reduction, and environmental consideration. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," they are also recommended as materials for innovative ideas and safety measures in public works.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!