Examples of the use of KNF pumps in biogas treatment systems.

Process pumps for research and development related to decarbonization and new energy, for the transfer, recovery, and circulation of CO2, hydrogen, oxygen, helium, and others.

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot adequately address. We believe that the KNF process pump, with its features listed below, can assist in solving our customers' technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

• Special Pump

Process pumps for research and development related to decarbonization and new energy, including the transfer, recovery, and circulation of CO2, hydrogen, oxygen, helium, and others.

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot adequately address. We believe that the KNF process pump, with its features listed below, can assist in solving your technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

• Special Pump

This is a promotional video for the latest explosion-proof diaphragm gas pump, the N680.1.2 EX series.

IECEx / ATEX compliant explosion-proof diaphragm gas pump

• Other pumps

Acquired Japan's explosion-proof certification, allowing safe use for sampling and gas transfer of flammable gases including hydrogen gas.

- Explosion-proof structure electrical machinery and equipment type certification passed - Increased safety explosion-proof structure, pressure-resistant explosion-proof structure - Motor division grade: Ex II 2G Ex h IIB+H2 T4 Gb

• Other pumps

Process pumps for research and development related to decarbonization and new energy, for the transfer, recovery, and circulation of CO2, hydrogen, oxygen, helium, and other substances.

In a decarbonized society and the development of new energy, there are many technical challenges that conventional gas pumps cannot address. We believe that the KNF process pump, with its features listed below, can assist in solving your technical challenges. Main features of the KNF process pump: - Contamination-free - A wide range of gas contact materials - Pressure-specific design with a maximum allowable discharge pressure of 1.2 MPa - Vacuum-specific design - Leak-tight design - Long lifespan design - Explosion-proof specifications (optional IECEx / ATEX) - Heat-resistant specifications with gas temperatures up to 240°C (optional) - Weather-resistant coating (optional)

• Special Pump

Robustly designed diaphragm vacuum pumps and compressors for process engineering.

- Maximum allowable discharge pressure: 12 bar (1.2 MPa) - Leak-tight design - Abundant gas contact materials: EPDM / PTFE - Gas transfer for hydrogen, carbon dioxide, helium, etc. Basic flow rate: 130 l/min ± 10% (EPDM diaphragm) 120 l/min ± 10% (PTFE diaphragm) Achievable vacuum level: 100 mbar abs Maximum allowable discharge pressure: 12 bar (1.2 MPa)

• Other pumps

This is an image video of the KNF process pump.

Main Content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transferring rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications) - Stationary gas pumps - Portable gas pumps

• Other pumps

This is an image video of the KNF process pump.

Mainly content - Contamination-free vacuum pumps and compressors - Transfer of rare gases, hazardous gases, and toxic gases - Double diaphragm (for transfer of rare gases) - High-temperature gases (heat-resistant gas pumps) - Aggressive, flammable gases (corrosion-resistant / explosion-proof specifications)

• Other pumps

IECEx / ATEX certified explosion-proof pump can be used in environments with flammable gases. *This is not an explosion-proof certified product in Japan.

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10^-3 mbar x l/s

• Other pumps

IECEx / ATEX certified explosion-proof pump can be used in environments with flammable gases. *This is not an explosion-proof certified product in Japan.

- Basic flow rate N922 8L: 7.5 l/min / N922 16L: 16 l/min - Achievable vacuum level 200-350 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PTFE - Robust design that withstands tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

• Other pumps

IECEx / ATEX certified explosion-proof pump can be used in environments with flammable gases. *This is not an explosion-proof certified product in Japan.

- Basic flow rate 7.5 l/min - Achievable vacuum level 140 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PVDF / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

• Other pumps

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.