Newsletter now available! Soundproofing technology from luxury cars applied to building materials.

[Sample distribution ongoing!] Unique technology condensed into units, providing overwhelming construction efficiency and a comfortable living space.

Shardan supports comfortable living in collective housing such as condominiums and apartments from the floor up, thanks to its excellent sound insulation and thermal insulation properties. It accommodates a wide range of flooring materials, including solid flooring and SPC flooring, and mitigates impact noise transmitted from upper floors to lower floors. **Features of Shardan** ☆ Integrated sound insulation and thermal insulation unit With a low floor thickness of 40mm, it can secure a space that is "more than 100mm higher than the typical ceiling height." Sound insulation: Industry-first! Achieves floor sound insulation performance of "LL-45" with a thickness of only 40mm, obtaining ΔLL(II)-3S certification. Thermal insulation: Utilizes sound-absorbing insulation material that demonstrates thermal conductivity equivalent to "high-performance glass wool insulation 48K." Workability: Compared to dry double flooring, "construction time is reduced to less than 1/3," allowing for easy installation using specially designed fastening components. Safety: Provides "high impact absorption" equivalent to tatami mats, enhancing safety during falls. **Shardan Lineup** ◯ SPF400 / SPF400HS A multi-type that does not limit finishing materials. *SPF400HS is a high thermal insulation version of SPF400.* ◯ OY430 / OY430HS A low-construction type that does not require a base layer. *OY430HS is a high thermal insulation version of OY430.*

• Wood products

[Sample Distribution] Easy installation with sound insulation performance equivalent to LL-45 and insulation performance comparable to high-performance glass wool insulation material 48K! 40mm thick low-floor substrate material.

Product Name: Chardan SPF400 【Features】 ✔ Low height of 40mm! ✔ Integrated soundproofing and insulation unit ✔ Reduced construction time to less than 1/3 compared to dry double flooring! (In-house research) ✔ Achieved LL-45 with SPC flooring! A multi-type that does not limit the choice of top materials This is a floor soundproofing material laid under flooring with a thickness of 40mm. It has been certified for performance with SPC flooring, which is said to be thin and hard, making it difficult to ensure soundproofing performance. With Chardan SPF400, SPC flooring can be used not only in commercial facilities but also in multi-family housing and welfare facilities where soundproofing and insulation functionality is required. Since it is a form that fills the underfloor space with special sound-absorbing material, it provides both soundproofing performance and insulation effect in one package. SPF400 Thermal Conductivity: 0.040 [W/(m·K)] SPF400HS Thermal Conductivity: 0.033 [W/(m·K)] * SPF400HS is a high insulation version of SPF400. Its composition and basic performance (thickness/soundproofing/constructability/safety) are equivalent to SPF400. Using dedicated edge treatment materials and fastening components, we achieve innovative construction that reduces construction time and noise.

• Wood products

[Sample Giveaway!] Just 0.5mm. Simply sandwich it between drywall to enhance the soundproofing performance of your walls.

【Features】 ■ With a thickness of 0.5mm, it does not require significant design changes. ■ Improves the coincidence phenomenon around 2kHz by 5dB. ■ Lighter than soundproof sheets, reducing work burden. ■ Can reduce installation time by 70% compared to soundproof sheets. The wall vibration control tape utilizes Iida's unique "vibration control soundproofing technology" that does not rely on thickness or weight. It is mainly adopted in multi-family housing. For more details, please check the Iida Industry website at the link below. You can request and confirm the following items on the website: - Sample requests are welcome. Please feel free to contact us. - A series of installation videos showing how to apply it to gypsum boards. - The mechanism of vibration control soundproofing and soundproofing performance regarding partition walls. - Auditory confirmation of the effects on partition walls. For more details on vibration control soundproofing technology, please check the website below. https://kenzai-orotex.jp/technology/wallfloor.php The viewing items on the website include: - The mechanism of vibration control soundproofing. - Experimental videos confirming the effects of vibration control soundproofing, etc. If you are having trouble with the sound environment in your home, please consult Iida Industry.

• Other consumables

[Sample available now!] Make walls thinner. Easy installation by simply sticking and sandwiching it with gypsum board for noise reduction! Lightweight, reducing the burden on workers.

Iida's unique vibration-damping soundproofing technology, which does not rely on traditional "thick and heavy" soundproofing methods, creates a quiet and comfortable living space. Easily tackle noise issues with simple installation by just sticking and sandwiching it onto gypsum boards! Its lightweight nature also helps reduce the burden on workers. Iida Sangyo's vibration-damping material, 'Zetro NV-αII', is a 0.5mm thick wall vibration-damping tape that "converts vibrations into heat to block sound." By simply sticking it between double layers of gypsum board, the TLD-45 wall is upgraded to TLD-50. It improves the coincidence phenomenon around 2kHz by 5dB. [Features] - Easy installation by just sticking and sandwiching onto gypsum boards - Adhesive tape eliminates the need for glue - Reduces installation time by approximately 70% compared to our standard - Lightweight, reducing the burden on workers *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables

[Sample Presentation] Just lay it out; a one-piece unit that doesn't require disposal! Equivalent sound insulation to LL-45 and insulation performance comparable to high-performance glass wool insulation material 48K!

Product Name: Chardan OY430 【Features】 ✔ No need for disposal; low height of 43mm! ✔ Integrated soundproofing and insulation unit ✔ Easy installation by simply laying it down; installation time for 50m² is about 3 hours (according to our own research) ✔ High impact absorption performance equivalent to tatami mats This is a floor soundproofing material to be laid under flooring with a thickness of 43mm. Being a low-profile product, it fits well under window frames! Due to its structure, which fills the underfloor space with special sound-absorbing material, it provides both soundproofing and insulation effects simultaneously. OY430 Thermal Conductivity: 0.040 [W/(m·K)] OY430HS Thermal Conductivity: 0.033 [W/(m·K)] * OY430HS is a high insulation version of OY430. The composition and basic performance (thickness/soundproofing/installation safety) are equivalent to OY430. Using our uniquely designed "OY Joint," we achieved innovative construction that reduces installation time and noise. It features high impact absorption similar to tatami mats, enhancing safety during falls. It is also recommended for use in facilities for the elderly and kindergartens.

• Wood products

【Sample available!】 Direct floor soundproofing material with the performance of "L-45".

**Features** - 43mm low profile ensures ceiling height - Low profile allows for good fit under window frames - Reliable floor sound insulation performance (L-45 certified by a third-party organization) - Easy installation with no need for a subfloor, just lay it down - High shock absorption comparable to tatami (around G50) Please consider for hotels, condominiums, and apartments. For more details, please check the Iida Sangyo website via the link below. You can request and confirm the following items on the website: - Request for samples - Free download of product CAD data - View actual installation videos (installation time: approximately 3 hours for 50m²) Adoption examples * Photos of examples can be viewed on the Iida Sangyo website. - A commercial building wants to open a yoga studio with solid wood flooring, but sound insulation is necessary due to a tutoring school below. → Ensured sound insulation while maintaining ceiling height with a low profile of 43mm. No complaints from below. - A request was made to renovate from tatami/straight laid cushion flooring to hardwood flooring. → Achieved the same floor height of 55mm as tatami, accommodating barrier-free access by applying it to the original cushion flooring area.

• Other safety and hygiene products

【Sample available!】Just stick it on Galvalume steel sheets. The industry's thinnest at 0.55mm for roof noise reduction.

**Features** - The industry's thinnest!! A tape with a thickness of 0.55mm solves rain noise issues. - Reduces indoor and outdoor rain noise by 10dB. - Only needs to be applied to 30% of the roof material's width. - Stays flexible and adheres well even in winter conditions. - Easy to cut with scissors or a cutter. For more details, please check the link to the Iida Sangyo website below. You can request and confirm the following items on the website: - Sample requests are welcome. Please feel free to contact us. - View videos measuring rain noise at a rainfall rate of 100mm/h. - View installation videos. - Free download of technical materials (effects when applying drainage hardware, performance comparison with insulation boards, durability, etc.). Past adoption examples: - Insulation boards became unusable when stored outdoors due to rain. With this product, indoor storage is possible without taking up much space. - Soundproof sheets were too heavy and difficult to install, so I wanted something easier to work with. - Now I can propose a combination of Galvalume roofs with vibration-damping tape to clients concerned about rain noise.

• Other consumables

【Sample available!】Simply stick it to the underside of a metal roof to reduce rain noise. With about 30% coverage relative to the roof width, the effect is outstanding!

Product Name: Zetoro NV-αII 【Features】 ✓ Just apply 30% of the width of the roofing material! ✓ Reduces indoor and outdoor rain noise by 10dB ✓ Industry’s thinnest! Despite being only 0.55mm thick, it effectively addresses rain noise ✓ Can be applied without hardening even in winter conditions ✓ Easily cut with scissors or a cutter Metal roofs are excellent in durability, design, and workability, but their soundproofing performance is insufficient, so vibration-damping tape is used to solve rain noise issues. The vibration-damping tape applied to the metal roof converts the vibrational energy from falling raindrops into thermal energy, thereby suppressing the generation of rain noise. The roofs of residences with applied vibration-damping tape reduce noise not only indoors but also outdoors. Zetoro NV-αII, which reduces rain noise by applying just 30% of the roofing material's width, can be used in cover methods during new construction or renovation.

• Rubber

We propose butyl tape in sizes not available in the market! Introducing waterproof tape.

We have turned vibration-damping butyl rubber used in automobiles into waterproof tape. This is possible because we handle hundreds of different sizes of automotive parts! We can suggest options tailored to your desired size! ◇ Examples of Use ◇ Waterproofing for roofing in single-family homes Waterproofing for balcony saddle areas Waterproofing during solar panel installation Waterproofing for seams in waterproof sheets If you are interested, please feel free to contact us!

• Repair Agent

Materials expand at temperatures above 220℃, blocking flames and heat transfer! Suppresses scattering after combustion.

The "Bantect Series" is a thermally expandable fireproof material that expands at temperatures above 220°C, blocking the transmission of flames and heat, and suppressing the scattering after combustion due to the effects of flame retardant formulation. We also offer other products such as "Bantect MG (Vulcanized Rubber Type)" which can be vulcanized and molded at 170°C (7 minutes or more), and "Bantect MJ (Injection Molding Type)" which features high flexibility and durability. 【Features (Partial)】 ■ Bantect Series - Material expands at temperatures above 220°C, blocking the transmission of flames and heat - Suppresses scattering after combustion due to the effects of flame retardant formulation - Suitable products can be selected based on the application and construction method ■ Bantect MG (Vulcanized Rubber Type) - Can be vulcanized and molded at 170°C (7 minutes or more) - Allows for the design of products with three-dimensional shapes through mold forming *For more details, please refer to the PDF document or feel free to contact us.

• others

Seven types of fire-resistant materials developed in-house!

○Thermal Expansion Fireproof Material "Bantect" Available in all forms, from molded products made of rubber and resin to paste-like products! Expands at approximately 200°C or higher during the initial stages of a fire! The material expands at the temperature of initial combustion in a fire, blocking the space that serves as a pathway for flame spread. Designed with halogen-free formulations to comply with environmental regulations. We can provide product recommendations based on the situation. Please feel free to consult with us.

• Contract manufacturing

Prevention of flooring cracks and uplift: No need for waste plywood or calp.

【Features】 ■ Can be directly applied to slab substrates ■ No need for backing material on the underside of the flooring due to elastic adhesive ■ Moderate elasticity that follows the expansion and contraction of the flooring, preventing cracking and lifting ■ Easy to apply even in cold weather ■ Solvent-free type that is environmentally friendly ■ Excellent dismantling properties compared to conventional rigid polyurethane adhesives, making it ideal for floor replacement For more details, please check the Iida Sangyo website. https://kenzai-orotex.jp/product/ibbond.php You can confirm the following items on the website: - Comparison of construction methods and compositions using conventional rigid types and elastic adhesives. - Videos showing that unevenness can be adjusted by holding with a notched trowel. - Results demonstrating flooring lifting tested in our own laboratory. - Installation videos are available for viewing (installation time: approximately 3 square meters, 2 minutes and 38 seconds). - Videos comparing dismantling properties with rigid adhesives (approximately 50% reduction) are available for viewing. - Product catalogs and installation manuals are available for free download, so please make use of them.

• glue

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

In this webinar, we will explain "Why packed columns continue to be chosen today" from a practical perspective of gas analysis. We will also introduce the various types and characteristics of packing materials offered by Restek, along with application examples, and share insights on how to make optimal choices based on analytical objectives. Furthermore, we will discuss the differences in hardware passivation techniques and how to differentiate their use, as well as examples of custom packed column designs tailored to specific purposes. Topics covered in the webinar: ✅ Types of packing materials for packed columns and their characteristics ✅ Differences in separation selectivity based on analytical examples for each packing material ✅ Examples of custom packed column designs Benefits: For beginners: You will gain an understanding of separation selectivity based on differences in packing materials and the basics of column selection. For intermediate and advanced users: You will gain a concrete understanding of how to select packing materials and the usefulness of custom packed columns to improve separations that do not satisfy with existing columns. Participant benefits: We will provide a collection of packed column applications that are not publicly available.

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

In "The Principles of Mixing and Defoaming and Key Points for Recipe Setting," we will explain the mechanism of the self-rotating and orbiting mixer, Awatori Nentaro, and the principles of mixing and defoaming in an easy-to-understand manner for beginners. ◇ Why do materials mix just by combining centrifugal force? ◇ What does it mean that mixing and defoaming can be processed simultaneously? ◇ How do the materials inside the container move during operation? This content is recommended for those who usually use Awatori Nentaro in their work but have never heard about its mechanism or principles and want to learn about it on this occasion. We will also explain temperature management based on material viscosity and considerations for operating conditions with examples. Additionally, in the "Legal Self-Inspection and Basic Maintenance Training," participants will have the opportunity to experience basic maintenance such as round belt replacement and legal self-inspection (regular self-inspection) using actual equipment. The capacity for each seminar is different, so please apply early! ◆ Date and Time: April 24, 2026 (Friday) 13:00 - 16:30 ◆ Venue: Hiroshima Convention Hall