Aiming for Zero Workplace Accidents! How to Choose the Right Protective Gloves [Environmental Measures VOL.8]

This will focus on cut injuries and chemical damage, which are believed to be common not only in labor accidents but also in near misses, explaining the characteristics of protective gloves and their proper usage.

Work that requires protective gear occurs not only in manufacturing but also in various industries. Among the many types of protective equipment, gloves in particular come in a wide variety, and there may be cases of improper use, reuse, or even instances where protective gloves are not used despite the work being hazardous. However, allowing such situations to persist leads to neglecting the "unsafe behaviors" and "unsafe conditions" discussed in VOL.3, which increases the likelihood of workplace accidents. In 2023, "cuts and abrasions" ranked 5th (5.61%) in workplace accidents, while "contact with harmful substances" ranked 13th (0.45%). However, there are likely many more near misses that did not result in accidents. This time, we will focus on the more frequent incidents of cuts and chemical injuries, discussing the characteristics of different types of protective gloves and the proper methods for their use.

• Other consumables
• Work gloves
• Other safety and hygiene products

We will introduce the basics of risk assessment and safety protective equipment to ensure the safety of workers.

Since 1988, the number of casualties from labor accidents has been decreasing, but since 2000, the situation has remained stagnant. In White Paper Vol. 2 [Winter Season Sees a Surge, Preventing Falls Before They Happen], we addressed the causes and preventive measures for falls, which are the most common type of labor accident. But why do labor accidents occur in the first place? This time, I would like to focus on protecting the safety of workers and discuss the mechanisms behind labor accidents and their prevention.

• Other consumables
• Work gloves
• Other safety and hygiene products

The Ministry of Health, Labour and Welfare has established new regulations to prevent labor accidents caused by chemical substances.

Starting from April 1, 2024, it has become mandatory for workplaces that handle chemical substances such as sodium hypochlorite (bleach), sodium hydroxide, and potassium hydroxide to require the use of protective eyewear. 【Details of the New Regulations】 ■ Workplace Structure 1. Workers handling chemical substances must wear appropriate protective gear, such as protective eyewear. 2. Establish a system for self-management. (1) Appoint a chemical substance manager. (2) Appoint a protective gear management supervisor. ■ Prevention of Direct Contact with Harmful Chemical Substances When engaging workers in tasks that involve manufacturing or handling chemical substances that are skin or eye irritants, corrosive to skin, or can be absorbed through the skin and cause health issues, it is necessary to require workers to use protective gear to prevent injuries, depending on the harmfulness of the substances. For more details, please refer to the materials.

• Other consumables
• Glasses and goggles
• Other safety and hygiene products

Compatible with a wide range of solvents. Can be used as inner gloves.

【Features】 ■Compatible with a wide range of solvents ■Ambidextrous disposable type ■Can be used as inner gloves ■European standards EN420/374 *For more details, please refer to the PDF document or feel free to contact us.

• Work gloves

A cutter with a safety design that automatically retracts the blade when cutting is finished. It's a precaution against accidents when cutting cardboard and packaging materials!

The safety cutter "SecuPro 625" solves the problem of cutting thick materials like cardboard, where "it's hard to cut without applying force," but "applying force increases the risk of cutting accidents." The "SecuPro 625" is designed so that the blade does not extend unless held. 【Features】 ■ The blade automatically retracts into the body when it is away from the material being cut. ■ Durable aluminum body. ■ Left-handed compatible. * For more details, please refer to the PDF document or feel free to contact us. * A video demonstrating how the blade automatically retracts is available.

• Cutter/Scissors

Thin chemical-resistant gloves made with three types of materials and featuring three characteristics!

"Try Lights" are gloves made from three types of materials: natural latex, neoprene, and nitrile, each possessing the three characteristics of "stretchability," "chemical resistance," and "durability." The surface is embossed, making them effective for tasks such as cleaning where items are easily dropped. As thin gloves, they offer a wide range of chemical resistance and serve as excellent inner gloves for chemical work that requires thicker gloves. 【Features】 ■ Three types of materials providing "stretchability," "chemical resistance," and "durability" ■ Slip-resistant processing ■ Wide range of chemical resistance ■ No water-resistant powder ■ Surface treated with chlorine for sterilization ■ FDA (U.S. Food and Drug Administration) certified *For more details, please refer to the PDF document or feel free to contact us.

• Work gloves

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)