The product page for 【Suntool】 has been updated! 【Achieving non-contact uniform application of hot melt in fibrous form【Curtain Spray】】.

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

• Other mounting machines

Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray coat in a single application over a wide area!

The "Curtain Spray" is a device that utilizes the cohesive force and viscosity of hot melt (adhesive) to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can also spray apply in one piece over a wide width. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability ■ Cost benefits through reduced usage of hot melt (adhesive) ■ Compatible with adhesives from high viscosity to low viscosity ■ Even application weight, beautifully coated uniformly ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Seals ■ Filters ■ Films ■ Spray lamination ■ Non-woven fabrics

• Other mounting machines
• Painting Machine
• spray

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and allows for thin application as well!

【Sample Distribution】We are currently distributing coating samples. Please check the end of the article for details. The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It allows for seamless and even application on wide materials, which is difficult with conventional spray coating, and also enables thin application. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials industries. *Uniform microparticle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Capable of uniform application of a small amount of hot melt ■ Excellent coating with a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to coating ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. For a limited time, we will send coating samples only to companies that inquire! Please feel free to contact us!

• Painting Machine

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

• Other mounting machines
• Painting Machine
• spray

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.