Added 'Near-infrared bandpass filter, wavelength: 940nm' to standard inventory.

Standard stock items include anti-reflective films, bandpass filters (BPF filters), and infrared cut filters (IR cut filters), among others.

We will start selling some optical thin film products (optical filter products) and patterned processing products as "standard stock items." We have responded to such requests! ◆ It's difficult to bear the cost of a whole batch when only a few pieces are needed for experiments... ◆ I want to see product development and performance tests quickly, so I need a few pieces at different levels... ◆ I just want to try it out for now... We often hear such voices through inquiries from our website. Even if custom-made filters are ultimately needed, I believe it is very difficult to define complete filter performance from the beginning.

• mirror
• Distance measuring device
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

Over 500 successful projects and a rich lineup of film deposition processing. With 100 years of experience since our founding, we contribute to our customers' technological innovations through optical thin films and precision processing technologies.

Adachi New Industries does not simply perform film deposition. We aim to be a company that can provide comprehensive proposals, from thin film design to deposition processes and product shape processing, according to our customers' specifications. Do you have any of the following concerns? - Is it possible to change characteristics based on the performance of the light source or photodetector? - If characteristics change with angle, can simulations be performed? - I would like to see product characteristics with a small batch prototype first. - After starting mass production, can you provide efficient proposals? - Can you measure filters with unknown optical characteristics? 【Features】 ■ High transmittance and reflectance ■ Product stability ■ Film deposition on various substrates ■ Comprehensive coverage as a product ■ Small batch prototype support available (single item support possible) * For more details, please refer to the catalog or feel free to contact us.

• Other optical parts
• Sensors
• LED lighting

This is an infrared wavelength filter optimized for optics, with plasma control technology enhanced to its limits.

Infrared materials are incredibly fragile! (Weak against scratches, weak against water, weak against chemicals) This common knowledge can be overturned with our company's technology. 1) Excellent infrared transmission properties This is a filter that transmits infrared light through the formation of a multilayer film, utilizing interference effects to achieve excellent transmission rates from near-infrared to far-infrared regions. 2) Design and customization available for desired wavelength ranges We can design and deposit films tailored to the wavelength ranges requested by our customers. Please inform us of the substrate type and wavelength range when making inquiries, as we will design according to the characteristics of the substrate. 3) Measurement equipment: FT-IR available Rest assured that we will always include a measurement chart (spectral characteristics) upon shipment. 4) Component support available We can not only handle substrate procurement and film deposition but also cut to any desired shape and ship as components. However, we will need detailed drawings. 5) Cleanroom compliance Our work environment maintains the necessary cleanliness levels from film deposition to inspection, ensuring a cleanroom operation. We have a robust system in place to address minute film defects (such as foreign particles in the film).

• Plastic processing machines (cutting and rolling)
• Transport and handling robots
• Surveillance Cameras

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.