Micro FT-IR imaging measurement

It is possible to visualize the distribution of substances within the specified plane! Suitable for evaluating the diffusion state of substances, etc.

We would like to introduce our "Microscopic FT-IR Imaging Measurement." It is possible to visualize the distribution of substances as a two-dimensional image within a specified plane. This allows for the evaluation of changes in the distribution of substances that would be difficult to assess with regular point measurements, using visible images. 【Analysis Suitable for Imaging Measurement】 ■ Evaluation of the diffusion state of substances (assessment of the mixing of substances in a mixture, evaluation of the locations of impurities, etc.) ■ Evaluation of molecular structural changes (assessment of the degree of oxidation from the surface to the interior of resin products, etc.) ■ Qualitative analysis of minute foreign substances that are difficult to sample *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to combinations of light elements, and their specificity arises from structures, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents examples of analysis and evaluation services for organic materials. [Contents] ■ FT-IR analysis ■ GC-MS analysis ■ Molecular weight distribution evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

Introducing a method for analyzing near the surface through total internal reflection of infrared light by closely adhering micro ATR crystals!

Based on imaging obtained from FT-IR spectra using the ATR method, cross-sectional analysis of organic multilayer films such as aluminum laminate film can be performed. The ATR method (Attenuated Total Reflection) is a technique that involves closely adhering a micro ATR crystal to the sample, allowing for analysis near the surface through total internal reflection of infrared light. Due to the influence of the refractive index of the crystal applied to the sample, the apparent spatial resolution is enhanced, enabling the analysis of smaller foreign substances. 【Features of the ATR Method】 ■ A technique that analyzes near the surface through total internal reflection of infrared light ■ Enhanced apparent spatial resolution due to the influence of the refractive index of the crystal applied to the sample ■ Enables the analysis of smaller foreign substances *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

It is possible to investigate the layer structure of organic films! Introducing imaging FT-IR analysis of high-performance multilayer film cross-sections.

It is possible to investigate the layer composition of organic films using FT-IR imaging through transmission of organic multilayer membranes that have been sectioned with a microtome. The document introduces imaging FT-IR analysis of high-performance multilayer film cross-sections using photos and graphs. [Imaging FT-IR Analysis of High-Performance Multilayer Film Cross-Sections] ■ Sample: High-performance multilayer film ■ Measurement Area: Transmission/Reflection method 175μm, ATR method 35μm ■ Spatial Resolution (Pixel Size): Transmission/Reflection method 5.5μm, ATR method 1.1μm *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

If it is 5 micrometers or larger, foreign object IR data can be obtained.

■Service Overview 1. Micro ATR Method IR data acquisition of foreign substances is possible if they are approximately 5um or larger. 2. Surface Distribution Image Observation of the in-plane distribution of organic substances is possible. 3. Temporal Changes Measurement of the state of organic substances that change on a second-by-second basis is possible.

• Analytical Equipment and Devices
• Contract Analysis
• Other contract services

We will introduce the pre-treatment for cross-sectional observation using devices for sample cutting, such as band saws!

We would like to introduce the sample preparation (sample cutting and resin embedding) for cross-sectional observation conducted by Aites Co., Ltd. We use cutting equipment suitable for cutting large substrates and thick components, such as the band saw "HOZAN K-100" and the IsoMet "Buehler Low Speed Saw." With the "HOZAN K-100," samples up to approximately X150mm, Y230mm, and Z70mm in size can be cut. Additionally, after cutting, the samples are embedded in epoxy resin or similar materials, but it is also possible to embed in resin before cutting. 【Product Lineup】 ■ Band Saw ■ IsoMet ■ Multifunctional Diamond Wire Saw *For more details, please refer to the PDF document or feel free to contact us.

• others

Depth-direction measurements using Raman spectroscopy! Material analysis of each layer is possible from the surface of multilayer films.

Our "Micro Raman Spectrophotometer" employs a confocal optical system, allowing for the adjustment of the focal position in the depth direction, similar to a microscope, enabling material analysis of each layer from the surface of multilayer films. Using the confocal function of the micro Raman spectrophotometer, the focus of the Raman laser light can be varied in the depth direction. Additionally, by continuously changing the focal position, it is possible to obtain spectra continuously in the depth direction. 【Features】 ■ Adoption of a confocal optical system ■ Enables material analysis of each layer from the surface of multilayer films ■ Capable of varying the focus of the Raman laser light in the depth direction ■ Allows for continuous spectral acquisition in the depth direction *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• Spectroscopic Analysis Equipment
• Contract Analysis

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

At construction sites, temporary parking lots may be established for workers and construction-related vehicles. On unpaved ground, mud and ruts can easily occur due to rain, which may hinder vehicle access. Hyper CLT mats are civil engineering materials that utilize wood CLT. By laying them in temporary parking lots, a suitable environment for vehicle passage and parking can be created while protecting the ground. They can be laid only in the necessary areas, and after the construction is completed, they can be removed and repurposed for temporary roads or access routes. The 5×10 panels weigh approximately 230 kg, and the 5×20 panels weigh about 460 kg, making them lightweight and easy to install and remove even with small machinery, allowing for changes in parking space. Additionally, they offer benefits unique to wood, such as glare reduction, noise reduction, and CO2 fixation. They are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A," and can be utilized for the development of temporary parking lots and innovative public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.