Our company's initiatives were featured in the "Amines Special" on page 6 of the Chemical Industry Daily on October 8, 2024.

Amino alcohols and alkyl morpholines are produced only by our company in the country.

Among the group of amine products, amino alcohols and alkyl morpholines are produced exclusively by our company in the domestic market. Amino alcohols are used as basic raw materials for environmental materials that improve air quality and water quality. Alkyl morpholines are used in the synthesis of urethanes and pharmaceuticals. - They demonstrate excellent performance as absorbents for acidic gases (CO2, H2S). - They can be used as neutralizers for water-based acrylic resins, etc. In particular, the dialkanolamine series improves the durability of the coating film. <Applications/Examples of Achievements> For urethanes, gas absorbents, neutralizers, intermediates for pharmaceuticals and agrochemicals, rust inhibitors, electronic materials, and more. *For more details, please download the PDF materials and check them. We are offering free samples upon request. Feel free to contact us regarding product selection, SDS, regulatory information, contract manufacturing, BCP, and more.

• Other polymer materials
• Chemicals

High Purity Solvent Metlify Series

We have numerous achievements in the production of solvents for electronic materials with metal content at the ppt level. Please feel free to consult us regarding items, metal specification values, purity, packaging, etc. - Grades: Low metal, metal management, high purity - Product examples: PGME (Propylene Glycol Monomethyl Ether), PGEE (Propylene Glycol Monoethyl Ether), Diglyme, and other items with proven results - Analytical technology: Equipped with Agilent 8900 Triple Quadrupole ICP-MS, capable of single ppt level analysis - Production facilities: Facilities capable of producing high-purity products - Usage examples: Cleaning agents for semiconductor manufacturing processes, photoresists for semiconductors, anti-reflective coatings for semiconductors *Please download the PDF materials and feel free to consult us. ◆ We can also provide surfactants with metal management. Please also check the page for the electronic materials surfactant 'FG-68G04'.

• Other semiconductors
• Chemicals
• Cleaning agents

In the manufacturing processes of electronic materials such as semiconductors and liquid crystals, they are widely used as solvents such as photoresists, stripping agents, cleaning agents, and etchants.

This is a chemical solution that meets the needs for cleaning agents used in semiconductor manufacturing processes, photoresists, anti-reflective films, and more, addressing requests for metal removal, metal elimination, and contamination risk reduction. - We have numerous manufacturing records with metal content below 500 ppt. - We offer a wide range of products; please feel free to consult us about specified chemical structures in addition to our products. - We also accept contract distillation. - Please consult us regarding items, metal specification values, purity, etc. - Domestic production, BCP, and refining inquiries are welcome. *Please download the catalog and feel free to contact us.

• Other semiconductors
• Chemicals
• Cleaning agents

Cleaning of ○○ stains on cosmetic manufacturing equipment and cleaning of ○○ stains adhered to resin molded products.

We are introducing case studies for solving cleaning challenges. For example: cleaning of ○○ stains on cosmetic manufacturing equipment, cleaning of ○○ stains adhered to resin molded products. We will listen to your cleaning challenges, consider them at our company, and make proposals. *Please feel free to download the materials and contact us.*

• Cleaning agents

Surfactants, glycol ethers, amines, ionic liquids. We will send samples according to your request!

Our company specializes in the core technology of the addition polymerization of ethylene oxide (EO) and propylene oxide (PO), applying organic synthesis such as the alkylation and anionization of alcohols to provide over 500 types of products. By adjusting the molar ratios of EO and PO and freely combining the sequence order, we offer products with optimal functions for our customers. Samples will be sent free of charge in principle. If you do not know the product number or price, wish to obtain an SDS, or want to know the expected effects, please let us know. We also accept requests for the selection of cleaning agents, dispersants, and emulsifiers, as well as contract production of desired compounds. Please feel free to contact us. Inquiries can be made through this page or the [Contact Us] section of each product, or via the link to the official Japanese Emulsifier website [Sample Request].

• Chemicals

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.