Measurement of moisture absorption distortion

We investigated the behavior of strain during moisture absorption and drying using a strain gauge!

We would like to introduce the results of our investigation into the behavior of strain during moisture absorption and drying using strain gauges. It was observed that the material expands when absorbing moisture and contracts back to its original state when drying, with the strain returning to the condition prior to moisture absorption. Regarding FR-1, it is presumed that it did not return to its original state due to changes in the chemical structure of the material caused by hydrolysis. 【Test Overview】 ■ 85℃ 50% ⇒ 85℃ 85% ⇒ 85℃ 50% ■ Test Materials ・FR-1 Paper Phenolic (single-sided board) ・FR-4 Glass Epoxy (single-sided board) ■ Strain Gauge ■ Foil Strain Gauge for Composite Materials *For more details, please download the PDF or feel free to contact us.

• Contract measurement

Observing the behavior of strain in thermal shock testing! The test materials used are FR-1 and FR-4.

We would like to introduce the "Strain Measurement of Thermal Shock Testing" conducted by our company. A sample with a strain gauge attached was set up in the thermal shock testing device, and the wiring of the strain gauge was connected to an external data logger to record the strain data in real-time during the test. The strain behavior during the thermal shock test was observed for two types of copper-clad laminates, and it was noted that significant strain occurred with changes in temperature. It was found that FR-1 exhibited greater strain compared to FR-4. [Test Conditions] ■ Temperature Cycle: -30°C to 120°C ■ Exposure Time at Each Temperature: 30 min ■ Test Materials - FR-1 Paper Phenolic (Double-sided board) - FR-4 Glass Epoxy (Double-sided board) ■ Strain Gauge: Foil strain gauge for printed circuit boards *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis

We conduct reliability evaluation tests for various electronics products, components, and materials in accordance with standard specifications such as JIS, JEDEC, and MIL.

■High Accelerated Life Test: 5 units ■Thermal Shock Test: 24 units ■Constant Temperature and Humidity Test: 22 units ■Liquid Tank Thermal Shock Test: 3 units ■High Temperature Storage Test ■Hot Oil Resistance Evaluation Test ■Insulation Resistance Continuous Monitoring Evaluation ■Continuity Resistance Continuous Monitoring Evaluation ■Electromigration Continuous Monitoring Evaluation ■Microfocus X-ray Transmission Observation ■Ultrasonic Microscope Observation ■ESD Evaluation Test ■CDM Evaluation Test ■Universal Tensile Evaluation Test ■Cross-section (Polishing) Observation Service (Evaluation before and after environmental testing is also possible) ■Solar Cell (Crystalline Silicon/Amorphous Silicon/Compound/Organic Thin Film, etc.) EL Emission Phenomenon ■Heat Generation Observation

• Testing Equipment and Devices
• Other inspection equipment and devices
• Contract Inspection

Two high-power constant temperature and humidity chambers have been introduced! Ideal for temperature cycle tests and temperature and humidity cycle tests for automotive parts and more.

At AITES Co., Ltd., we offer "environmental testing in a high-power constant temperature and humidity chamber." We can achieve a constant temperature change of up to 15°C/min (-45 to ±155°C). Temperature cycle tests can be conducted by controlling the temperature gradient. Additionally, the temperature control range is wider than that of typical constant temperature and humidity chambers, allowing control at 95°C. 【Features】 ■ Two high-power constant temperature and humidity chambers introduced ■ Constant temperature change of up to 15°C/min (-45 to ±155°C) possible ■ Temperature cycle tests can be conducted by controlling the temperature gradient ■ Wider temperature control range than typical constant temperature and humidity chambers ■ Controllable at 95°C *For more details, please refer to the PDF materials or feel free to contact us.

• Contract Analysis
• Contract measurement
• Contract Inspection

Applicable to change observation, with support for additional analysis! We evaluate the subject in a time series and non-destructive manner.

During reliability testing, the samples change continuously. Do you have any questions such as "At what point did the crack occur?", "How does the degradation progress?", or "How much has it changed from the initial state?" By combining this with reliability testing, we will evaluate the subject in a time-series and non-destructive manner. 【Features】 ■ Applicable for observing changes in whiskers, migration, pressure resistance, solder evaluation, chemical erosion tests, and aging products in the market ■ Environmental tests and observation frequency will be conducted according to customer requirements ■ Additional analyses such as electrical characteristics, SEM observation, elemental analysis, and cross-sectional observation are also available *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Contract Inspection

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

The wooden lightweight sheet "Hyper CLT Sheet," utilizing CLT (Cross Laminated Timber), is a sponsor of the Masters Koshien (Okayama). The Masters Koshien is where those who have experienced high school baseball come together across generations to pursue their goals once again. We resonate with their "attitude of continuing to challenge" and support their activities from Okayama. The Hyper CLT Sheet is a product created to provide a new option in civil engineering sites, which have primarily relied on steel sheets until now. It is lightweight, easy to handle, and features the environmental value unique to wood. Furthermore, it is registered as a **Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A,"** aiming for widespread adoption in various sites, starting with public works. Wood, NETIS, civil engineering, CLT, wooden lightweight sheets. We will continue to support challenges in both the field and sports from Okayama. Masters Koshien (Okayama) https://masters-okayama.com/

Features: ● Intel Core Ultra (Series 2) processor LGA 1851 socket (CPU sold separately) ● DDR5 6400MT/s dual-channel support, CU/U-DIMM x2 (up to 128GB) (memory sold separately) ● M.2 M-Key x1, E-Key x1 ● USB 3.2 x4, USB 2.0 x8 ● Intel Ethernet Controller I226-V (2.5GbE) x2 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCI Express Gen5 x16 x1, PCI Express Gen4 x4 x1, PCI Express Gen4 x1 x1 * This model does not include memory, storage, or OS.

Features: ● Intel Core Ultra 200S series processor LGA 1851 socket (up to 125W) (CPU sold separately) ● DDR5 6400MT/s dual-channel compatible, CU-DIMM/U-DIMM x4 (up to 256GB) (sold separately) ● M.2 M-Key x2, E-Key x1, B-Key x1 ● USB 3.2 x8, USB 2.0 x6 ● 2.5GbE LAN x3 ● SATA 6Gb/s x2 (supports RAID 0 / 1 / 5) ● PCIe Gen5 x16 x1, PCIe Gen4 x4 x2, PCIe Gen4 x1 x1 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.

Features: ● Supports Intel Core Ultra 200S series processors with Intel H810 chipset and LGA1851 socket (up to 125W) (CPU sold separately) ● DDR5 CSO-DIMM x2 (up to 128GB) (memory sold separately) ● 2.5GbE LAN x2 ● HDMI x2, DisplayPort x1, LVDS/eDP x1 (supports simultaneous output of up to 3 screens) ● SATA 6Gb/s x4, M.2 M-Key x1, M.2 E-Key x1, M.2 B-Key x1, PCI Express Gen5 x16 x1 ● USB 3.2 Gen2 x2, USB 2.0 x8, RS-232/422/485 x1, RS-232 x5 ● Compatible with ATX power supply * This model does not include memory, storage, or OS.