AutoForm ProgDie – Software solutions for progressive die manufacturers.

Design, simulation, evaluation, and verification of the press forming process using sequential die sets.

At the die manufacturer, multiple strip layout proposals can be efficiently designed, simulated, verified, and modified using AutoForm ProgDie, allowing for the selection of the optimal layout according to requirements. - Design of strip layouts - Design of dies - Verification of strip designs *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies

Initial assessment of moldability based solely on the shape of the part, without considering the mold shape!

"AutoForm-StampingAdviser" is software that allows for the rapid and easy execution of feasibility evaluations for parts and processes, as well as considerations of blank shapes, material yield, and blank costs. It provides feedback on quality issues related to press forming, such as the risks of wrinkles, cracks, and excessive sheet thinning, as well as evaluations of blank unfolding shapes and material costs. 【Features】 ■ Feasibility evaluation of parts and processes ■ Feedback on quality issues related to press forming ■ Predictions of blank shapes and nesting 【Main Functions】 ■ Powerful and flexible configuration options ■ Quick modifications of part shapes ■ Multiple blanking options ■ Use based on parts only or complete die shapes *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies
• Mold Design
• Stress Analysis

It brings deep understanding and transparency to the molding process from the early engineering stages.

"AutoForm-Sigma" is software that enables the analysis of press-formed parts and processes, as well as the improvement of robustness. It is possible to identify which design parameters affect the quality of parts and to what extent. Additionally, if issues arise during trials or production, it supports the identification of corrective actions. Furthermore, it can also identify ineffective corrective measures and appropriate means that lead to problem resolution. 【Features】 ■ Analytical process improvement ■ Stability and reliability of the forming process ■ Robust manufacturing processes ■ Minimization of defective formed parts ■ Minimization of correction loops and associated costs 【Main Functions】 ■ Automatic variation of design parameters ■ Verification of key design parameters ■ Assessment of noise and variation range of process parameters ■ Evaluation of process capability ■ Automatic execution of multiple simulations *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies
• Mold Design
• Stress Analysis

You can proceed with the operation step by step throughout the entire process!

"AutoForm-DieDesigner" is software that allows for the rapid creation of alternative designs for die faces throughout the entire press forming process. Once the die face design is created, it can be used for process simulation with AutoForm-FormingSolver. The results can be evaluated with AutoForm-Explorer. By fully integrating die face design with simulation and result evaluation, it enables the quick assessment of multiple alternative process and mold concepts, as well as the selection of optimal concepts regarding formability, quality, and cost. 【Features】 ■ Creation of concept die faces ■ Evaluation of multiple process concept alternatives through direct integration with process simulation ■ Deep understanding and verification of the entire process design 【Main Functions】 ■ Creation of parameterized die face shapes for all processes ■ Creation of excess material based on customized profiles ■ Automatic unfolding of flanges on excess material surfaces ■ Modeling of shapes using morphing technology

• Press Dies
• Mold Design
• Stress Analysis

We will conduct a simulation of press molding using line, transfer type, or progressive type.

"AutoForm-FormingSolver" is software that simulates press forming using line, transfer, or progressive dies. It accurately and quickly simulates the entire press forming process, including the drawing process and springback and hemming from the second operation onward, allowing for verification. Once the simulation results are available, they can be displayed in AutoForm-Explorer to obtain detailed information about the forming process. 【Features】 ■ Simulation of line and progressive die press forming ■ Fast and accurate simulation of deep drawing, re-strike, trimming, flanging, and hemming processes ■ Accurate simulation of springback ■ Deep understanding of the entire press forming process 【Other Features】 ■ Rapid verification of new process concepts to improve quality and reduce costs ■ Reduced computation time utilizing SMP or MPP parallel processing technology ■ Enhanced options such as thermal effects, phase transformation, and tribology improvements *For more details, please refer to the PDF materials or feel free to contact us.

• Press Dies
• Mold Design
• Stress Analysis

The blank outline is optimized so that the part boundary matches the target shape and dimensions!

"AutoForm-Trim" is a tool used in conjunction with AutoForm-FormingSolver to determine the blank outline and to examine suitable trim lines during the trim die trial-out. This software allows for the simultaneous design of draw dies and trim dies. At the end of the pre-process for the trim operation, the trim line is optimized so that the part boundaries conform to the target shape and dimensions. 【Features】 ■ Determination of suitable trim lines and blank outlines ■ Time reduction and cost savings through simultaneous development of trim dies and draw dies ■ Reduction of trial-out time for laser trimming of complex parts 【Main Functions】 ■ Automatic determination of blank outlines for near-net-shape manufacturing ■ Automatic calculation of multiple blank outlines ■ Calculation of segments for customer-specified blank outlines or cut outlines ■ Simultaneous determination of all cut-out lines for multiple cutting processes *For more details, please refer to the PDF document or feel free to contact us.

• Press Dies
• Mold Design
• Stress Analysis

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.