Circular Economy News, October 28, 2024 issue; November 18, 2024 issue; December 9, 2024 issue - Advertising Announcement

You can easily tell if the liquid in the drum is full or empty with just one touch!

"Sensor-type Liquid Level Gauge for 200L Drums" GDB-CF / For Full GDB-CL / For Empty (For low-viscosity oil, kerosene, diesel, wastewater, and waste liquids) *Not suitable for solvents or chemicals that can damage materials. "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside, using each product. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids include low-viscosity oil, kerosene, diesel, water, wastewater, and waste liquids. *Not suitable for solvents or chemicals that can damage materials. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug of the drum (G3/4). ● Confirmation work can be done within 3 minutes from startup (automatic stop after 3 minutes). ● The full and empty indicators light up in red and alert with a 15-second buzzer. ● Uses four AA batteries (approximately 1,000 uses). ● This product is for indoor use only. *Do not use outdoors.

• Other pumps

A liquid level gauge that can be connected to an air pump to check whether the liquid in a JIS standard 200L drum is full or empty.

"Sensor-type Liquid Level Gauge for 200L Drum" GDA-HH / For Full (Oil, Kerosene, Diesel, Solvent) *Not suitable for corrosive substances like chemicals GDA-HL / For Empty (Oil, Kerosene, Diesel, Solvent) *Not suitable for corrosive substances like chemicals "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting or peering into the drum. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Suitable liquids include low-viscosity oil, kerosene, diesel, and solvents. *Not suitable for corrosive substances like chemicals. "Features" ● Specifically designed for JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Since it is air-driven, the liquid level gauge can be used in areas where open flames are prohibited. ● Can be used in combination with air-driven handheld pumps (ACH, AMVH, AMH1 series). ● After the pump stops, only GDA-HL can discharge additionally. The pump operates while pulling the dispensing ring. ● This product is for indoor use only. *Do not use outdoors.

• Liquid level control/level switch

Non-contact detection of liquid in the container! A liquid level gauge that displays the remaining amount on an LCD panel. With the wireless type and using a parent unit, you can manage the remaining amount in real-time with a dedicated PC application!

"JIS Standard 200L Drum, Resin Drum, IBC Container (Tank) Compatible Laser Liquid Level Gauge Standard/Wireless/Parent Unit/Repeater (GDE-CL/GDE-CLW/GDE-W/GDE-R)" GDE-CL / Standard Type, No Wireless, Battery Operated GDE-CLW / Wireless Type, AC100V GDE-W / Wireless Type Dedicated Parent Unit, AC100V GDE-R / Wireless Type Dedicated Repeater, AC100V (Oil, Kerosene, Diesel) *Solvents and chemicals are not compatible due to laser sensing considerations "Features" ● Measurement in various containers such as drums (display in %, L, mm) Can also be used for other containers if the maximum liquid height is set (display in % and mm / L display not available) * % indicates the remaining liquid ratio from the total, L (liters) indicates the remaining liquid volume, mm indicates the remaining height from the bottom layer relative to the total liquid * Small plug (G3/4) can be attached to the drum ● Select units from "%, L, mm" and display on the LCD panel (JIS Standard 200L Drum) ● Set the height at which a sound will be emitted during "%" measurement ● Sends liquid volume data to the USB-connected parent unit every 30 seconds ● Can manage up to 15 units in real-time within a dedicated PC application ※Please note that this is available for sale in Japan only.

• Liquid level control/level switch

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.