The product page for 【Suntool】 has been newly added with the case study on "Hot Melt Adhesion of Masking Tape"!

This is a case study introducing solutions for manufacturers of paper products and packaging materials. The introduction of the E-Coater coating system has achieved a reduction in manufacturing costs.

[Consultation from a manufacturer of paper products and packaging materials] We were contacted by a manufacturer who is currently applying water-based solvent adhesives to washi paper to produce masking tape. They wish to switch to hot melt adhesive application equipment to reduce material costs. [Introduced System] E Coater Head (coating width 310mm) Coating amount: 20g/m2 VH60WSS tank [Features] - Uniform coating is possible - Special coater head for on-roll coating - Maximum coating width: 600mm - Ideal for laminating thin films as it does not create lines or unevenness on the surface of the sheet after laminating printed sheets (films) [Implementation Effects] Achieved increased production speed and reduced manufacturing costs. *For more details, please download the PDF or feel free to contact us.

• Other mounting machines
• Painting Machine
• Other painting machines

There are methods for applying with tension between rolls and on-roll application, allowing for continuous/intermittent (partial application) depending on the purpose!

This is a method for applying hot melt adhesive in a uniform width, over a surface, or in stripes. There are methods for applying it under tension between rolls and on-roll application, which can be continuous or intermittent (partial application) depending on the purpose. 【Features】 ■ Coater head for contact-type application ■ The application pattern can be arbitrarily set according to the shim pattern. ■ High-speed intermittent adhesion is possible, accommodating adhesives from high viscosity to low viscosity. ■ Beautiful coating with thin film adhesion. ■ There are measures to prevent winding during application and to address clumping of hot melt adhesives (using hot air). * For more details, please download the PDF or feel free to contact us.

• Painting Machine
• spray
• Other painting machines

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Features: ● Equipped with Intel N series processors (N250/N150) ● Fanless design ● Ultra-thin compact chassis (30mm thick) ● Supports DDR5 memory ● Dual display output ● Dual Gigabit LAN ● Abundant M.2 expansion slots ● Equipped with TPM 2.0 * This model comes without memory, storage, and OS.

Features: ● Equipped with Intel Core Processor Series 2 ● Space-saving design of 150 × 270 × 225mm ● Supports ECC-compatible DDR5 memory ● Abundant storage configurations ● Dual 5G/4G communication expansion support ● Compatible with NVIDIA RTX PRO 4000 Blackwell SFF ● Flexible PCIe expansion ● Wide power input for industrial applications ● Operating temperature range of -20℃ to 45℃ ● Standard TPM 2.0 included * This model does not include memory, storage, or OS.

Product Features: ● Compatible with Intel Processor Core 3 and N series ● DDR5 SODIMM ×1 (up to 32GB) (sold separately) ● VGA ×1 + HDMI ×2 ● LAN ×4 (IEEE 802.3 at/af PoE compatible, total 80W) ● 9V to 36V DC input (with protection circuit) ● Wide temperature range -20℃ to 60℃ ● Onboard TPM 2.0

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.