We will be exhibiting at the 2012 Cleaning Comprehensive Exhibition.

We will conduct a live demo at Internepcon! A proposal for the latest one-component cleaning system from Kaken Tech, the number one in flux cleaning performance!

A flux cleaning system that enhances consideration for the environment and cost, the 'Micro Cleaner ECO'! In the flux cleaning of electronic circuit boards and electronic components, it has achieved the ideal of 'high cleaning power', 'non-hazardous one-liquid cleaning agent', and 'cost reduction'! The dedicated cleaning agent Micro Clean ECO-3002 can be used diluted three times with water, so it does not fall under the hazardous materials of the Fire Service Act! Additionally, it can reduce VOC components by approximately 70% while maintaining high cleaning performance (during use). Moreover, the built-in distillation regenerator in the device continuously distills and regenerates the dirty cleaning solution, reducing the amount of liquid consumed and eliminating the need for wastewater treatment facilities due to zero waste liquid. This enables operation at a lower running cost than ever before.

• Other cleaning machines
• Water treatment equipment
• Wastewater/wastewater treatment equipment

Just 1 minute! Outstanding cleaning performance! For cleaning solder pallets, it's Kaken Tech!

The pallets that come into direct contact with the product greatly influence mass production quality. The pallet cleaner and Paleclean system, specialized in pallet cleaning, significantly contribute to quality stability. The solder pallet cleaning system "Pallet Cleaner" achieves remarkable cleaning power with the specially developed cleaning agent Paleclean. The heavily adhered flux can be beautifully cleaned in a short time, freeing you from the hassle of cleaning pallets. In large equipment, not only pallets but also reflow fixtures can be cleaned! For more details, please download the catalog or contact us.

• Other cleaning machines

Outstanding cleaning ability! Quick-drying improves work efficiency!!

Ideal for substrate repairs and equipment maintenance such as reflow ovens! It powerfully cleans flux with the solvent strength of the cleaning solution and spray pressure. Quick-drying for improved work efficiency, with no irritating odor and low smell. For more details, please download the catalog or contact us.

• Cleaning agents

Alternative response to methylene chloride.

We handle paint and ink removers for cleaning tools. We offer alternatives to methylene chloride. For more details, please download the catalog or contact us.

• Other consumables

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.