★Techne Measurement★ WEB "Control Panel TKZ Series" has been added to the lineup.

Measurement panel for moisture management for wood pellet storage silos, explosion-proof specifications enable temperature and humidity measurement in explosion hazard areas.

■ Measurement using a probe from the top of the silo ■ Fire and explosion prevention measures for wood pellet storage silos ■ Equipment with barriers can be easily used in hazardous areas ■ Conversion to moisture-related physical quantities ■ Atmosphere measurement inside wood pellet storage silos ■ Maintaining accuracy up to 180°C

• Other temperature and humidity measuring instruments

Portable Dehumidifier for Furnace Atmosphere Gas

This product is an all-in-one portable dehumidifier that incorporates the necessary filter, pump, cooling device, and auto-drain device to dehumidify the atmosphere gas inside the furnace. With improvements to the switching power supply and internal structure, it has become lightweight and easy to carry, and the auto-drain function allows for complete operation from sampling to drainage with just this one unit. The representative devices built into this product are as follows: + Filter + Pump + Needle valve (built into the flow meter) + Flow meter + Cooling device + Auto-drain device

• Drying Equipment

For measuring gas in the furnace atmosphere.

This product allows for the measurement of dew point, oxygen, and hydrogen concentrations with a single unit, and the combination of measuring instruments can be freely selected. It enables flow adjustments to match the sample line and allows for the measurement of 1-3 sample line systems. ● Measurement of dew point, oxygen concentration, and hydrogen concentration ● Gas measurement of sample lines 1-3 ● Customizable shapes and flow adjustments to meet customer needs with a wide range of options ● High-temperature environments are possible with optional panel coolers ● Furnace atmosphere measurement panel

• Other temperature and humidity measuring instruments

Control panel for dew point measurement in corrosive gas.

Dry chlorine gas line measurement moisture analyzer panel, performing measurements of dry chlorine gas with a sampling equipment storage panel, and converting and outputting signals with a converter storage panel. ● Moisture analyzer storage panel ● Analysis panel for dry chlorine gas line measurement ● Can be changed to pole-mounted or wall-mounted depending on the installation environment ● Can accommodate high-temperature environments with an optional panel cooler ● Composed of two units: a sampling equipment storage panel for gas sampling and a converter storage panel that houses the signal converter.

• Other temperature and humidity measuring instruments

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

[To the owners of parking lots and parking lot construction companies] "I’m worried about not colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those particularly facing sidewalks or roadways are expected to pose risks of dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures using various sensors and alerts the surroundings with LED lights and buzzers. The device consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *Please note that a separate control panel is required to include the controller and switching power supply (24V) when using the exit warning system. *We kindly ask that customers arrange for the switching power supply (24V), LED rotating light, control panel, circuit breakers, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. We hope this will contribute to safer vehicle passage for everyone. ◎ For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.