[Online Seminar] Changing Machining: What Companies Can Achieve by Implementing Monitoring Systems (June 25)

It will contribute to cost reduction, allowing resources to be allocated to more important issues!

This document provides information about the "Artis Smart Monitoring Solution" in the context of machines, work, and FACTORY 4.0. It introduces an overview and features of the "Artis Smart Monitoring Solution," the product matrix of "GENIOR MODULAR," and tool/process monitoring. Additionally, it includes information on "machine condition monitoring" and the software "C-THRU4.0," so please feel free to read through it. [Contents (partial)] ■ Artis Smart Monitoring Solution ■ Simple integration of GENIOR MODULAR ■ GENIOR MODULAR product matrix ■ GENIOR MODULAR tool/process monitoring ■ GENIOR MODULAR base module *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

An ideal solution for detecting process anomalies during metal cutting with machine tools!

"GEMTP" is a power measurement module suitable for tool and process monitoring to avoid damage to workpieces. It supports 127 types of cycles and can connect to all machine controls via I/O signals. With multiple monitoring strategies (static, dynamic, area), it can be applied to various cutting processes. 【Features】 ■ Single-channel system for drive monitoring ■ Monitoring of tool conditions (breakage, wear, missing) ■ Supports 127 types of cycles ■ Can connect to all machine controls via I/O signals ■ Easy installation in control cabinets *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Detects dynamic collisions and damage! Protects machines with a compact design that is easy to install inside control panels.

"GEMAMS" is a collision detection system that detects collisions during the autonomous operation of machine tools and robots using connected acceleration sensors. If the limit of a hard stop (such as an emergency stop) is exceeded, a stop signal is issued within 1 millisecond. This allows for the avoidance or minimization of damage to the machinery. Additionally, we also offer "GEMCMS," which detects collisions during autonomous operation or manual operation using piezoelectric force sensors. 【Features】 ■ 1 to 3-axis acceleration sensors can be connected via IEPE interface (standard specification) ■ All events are stored in event memory ■ Three operation modes ■ Three different limits can be set for each mode ■ Frequency analysis through FT evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

Opportunities for preventive maintenance of peripheral devices and process monitoring are possible! Additionally, highly reliable data can be obtained.

"GEMVM" is a standalone module that enables preventive maintenance of machines, peripheral equipment, and other systems through vibration monitoring and temperature monitoring. By detecting collisions and activating alarms quickly (in less than 1 ms), it maximally protects against damage caused by collisions. Based on available sensor signals and defined processing, it performs predictive maintenance, detects tool imbalance, and conducts simple tool/process monitoring. Additionally, when combined with the VA-3D MG sensor, it can measure up to 3-axis gravitational acceleration. 【Features】 ■ Detects damage to spindle bearings and wear or defects in drive shafts ■ Detects vibrations and tool imbalance during machining processes ■ Minimizes damage ■ Visualization and analysis of measurement data ■ Detects incorrect cutting parameters *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

When a collision occurs, the stop signal is activated within 1 ms! It minimizes damage as much as possible.

"GEMCMS" is a highly efficient tool designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for valuable time savings and enabling the execution of stop commands in an even shorter time. Additionally, special sensors detect any slight μ-range distortions within the machine structure caused by forces acting on each axis of the spindle. [Features] ■ Minimizes subsequent damage due to programming, setup, and operational errors ■ Reaction time is under 1ms, faster than any NC overload device ■ Capable of detecting both severe collisions and non-impact (quasi-static) collisions ■ Extends machine lifespan ■ Increases machine operating rate *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Essential for economically efficient production! Introduction of autonomous intelligent tools and process monitoring systems.

We would like to introduce our tool and process monitoring system, 'GEMCPU'. The modular system utilizes all relevant process signals and data from machine tools, reacting in real-time after an event occurs. The system captures digital measurement data via a fieldbus interface or sensors, evaluates the data based on multiple criteria, and visualizes the process transparently. Trend or alarm reports enable users to optimize processes and produce more efficiently. 【Features】 ■ An economical solution even for simple applications ■ Can acquire up to 16 real-time measurement signals on up to 10 NC channels in parallel with the process ■ Virtually no need for troublesome adjustments or re-calibrations of the machine ■ Process signals are recorded and can be monitored online or offline * You can view the English version related link page. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube