Eliminate "inaccessible." New release of the "relay device" that solves communication issues in wireless emergency stop systems!

High-reliability wireless transmission and reception device compliant with ISO13849-1! Control from long distances using the 920MHz band.

The product is a wireless transmission and reception device "@seguro wes" that complies with functional safety standards enabling safe wireless emergency stops. It can be used in combination with either a contact transmitter that connects to safety devices such as waterproof, rechargeable remote controls, light curtains, and door switches, or a receiver installed on the machine to be stopped. It is suitable for installation in locations away from the main unit or outdoors, and antenna separation is also possible. 【Reasons to Choose This Product】 ■ Obtained ISO 13849-1 conformity certification from the Japan Quality Assurance Organization ■ High-reliability abnormal monitoring functions such as wireless communication interruption monitoring and power supply monitoring to prevent loss of stop control ■ Wireless communication in the 920MHz band allows for minimal interference and control from long distances ■ Built-in relay for emergency stop makes it easy to implement wireless emergency stops for various devices ■ Relay devices enable expansion of communication areas and countermeasures for dead spots in radio waves *If you wish to request a free rental, please feel free to contact us. *For more details, please refer to the PDF materials. Inquiries are also welcome.

• Communications

Measures against human intrusion into dangerous areas and prohibited driving zones! Supports multiple vehicle stops and input from contacts other than buttons.

The "AT-SW1T1/AT-SW1T2" is a contact transmitter that allows the connection of outputs from safety devices such as light curtains and distance sensors, enabling wireless stopping based on the detection of these safety devices. It enables compliance with standards for unmanned transport vehicles at a low cost, allowing operation without speed restrictions for unmanned transport vehicles that do not have human detection means. 【Features of the Contact Transmitter】 ■ Complies with functional safety standards to safely stop machinery ■ Achieves stopping linked with safety devices wirelessly ■ Available in two selectable types *For more details, please refer to the PDF document or feel free to contact us.

• Communications

Measures against human intrusion into dangerous areas and entry into no-entry zones! Supports multiple vehicle stops and input from contacts other than buttons.

The "AT-SW1T1/AT-SW1T2" is a contact transmitter that allows the connection of outputs from safety devices such as light curtains and distance sensors, enabling wireless stops triggered by the detection of safety devices. It enables compliance with standards for unmanned transport vehicles at a low cost, allowing operation without speed restrictions for unmanned transport vehicles that do not have human detection means. 【Features of the Contact Transmitter】 ■ Complies with functional safety standards to safely stop machinery ■ Achieves wireless stops linked with safety devices ■ Available in two selectable types *For more details, please refer to the PDF document or feel free to contact us.

• Communications

We will start renting prototype wireless emergency stop devices compatible with M:N communication.

"@seguro wes" is a wireless transmission and reception device designed for the emergency stop of robots that coexist with humans, AGVs, and large machinery. In addition to the ability to stop multiple devices (N units) with a single transmitter, we have developed a product that allows for stopping from multiple transmitters (M units), which has been highly requested. This enables the realization of stops from multiple transmitters. 【Features】 ■ Obtained compliance certification from the Japan Quality Assurance Organization 'ISO 13849-1' ■ Implemented a highly reliable abnormal monitoring function to prevent loss of stop control ■ Wireless communication in the 920MHz band allows for minimal interference and control from long distances ■ Capable of stopping multiple devices (N units) and stopping from multiple transmitters (M units) *Currently, we are offering free rental of prototype wireless emergency stop devices that support M:N communication. *If you are interested in renting a prototype, please feel free to contact us.

• Control Panel

Eliminate "inaccessibility." New release of the "relay device" that solves communication issues in wireless emergency stop systems!

Our company offers a compact wireless transmission and reception device called '@seguro wes' that allows for emergency stops of AGVs, AMRs, robots, and equipment from a distance with just the push of a button. This product is highly reliable and compliant with ISO 13849-1, and it excels in versatility, enabling control from long distances with minimal interference through 920MHz wireless communication. We are pleased to announce the launch of a "relay device" that ensures reliable transmission of emergency stop signals in environments where wireless communication is difficult or in extensive work sites. **Benefits of Introducing the Relay Device** - Expands communication area and eliminates "blind spots" A wireless network can be established to cover the entire factory, providing peace of mind that you can "stop whenever you want" no matter where you are. - Improves communication stability and reduces the risk of malfunction By securing multiple communication pathways, signals can still be transmitted through alternative routes in the event of a communication failure. - Breaks through communication distance barriers By using multiple relay devices, communication distances can be significantly extended. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Other safety equipment

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.