New Release: PFAS Mixed Standard Reagent! (Restec Corporation)

World Standard PFAS Analysis Support | Restek's Expert Team Delivers Fast and Accurate Results

Regulations and analytical methods for PFAS testing continue to change around the world. Restek's global expert team provides products and technical support that respond to the latest regulatory trends, enabling fast and accurate analysis. As a reliable partner, we offer optimal solutions. ■ PFAS Resource Library ■ PFAS Applications/Chromatograms ■ Partner for PFAS Analysis ■ PFAS-Related Products

• Testing Equipment and Devices

We will introduce the selection of SPME Arrows and the appropriate conditioning procedures!

This document serves as the instruction manual for the "Restek PAL SPME Arrow." It provides detailed information on the appropriate selection of SPME Arrows based on the characteristics of the analyte, as well as heating conditioning and solvent washing. The content is presented alongside diagrams, making it easy to reference. We encourage you to read it and make use of it. [Contents] ■ Selection of SPME Arrows ■ Heating conditioning and solvent washing of SPME Arrows *For more details, please refer to the PDF document or feel free to contact us.

• Technical and Reference Books

Explaining rapid, simple, low-cost, efficient, robust, and safe sample preprocessing techniques!

This document covers both Stage 1 (extraction) and Stage 2 (purification) of the "QuEChERS" method, providing a general overview of each stage and information on three key methods. "QuEChERS" is a rapid, simple, low-cost, efficient, robust, and safe sample preparation technique. Images are included for each step to provide clear explanations. We encourage you to read it. [Contents] ■ Overview of the two-stage operation in the QuEChERS method ■ Stage 1: Extraction ■ Stage 2: Purification *For more details, please refer to the PDF document or feel free to contact us.

• Technical and Reference Books

The fixed volume is large and the mechanical stability is high! Explanation of heating conditioning and solvent washing, etc.

This document is the instruction manual for the "Restek PAL SPME Arrow." It has several advantages over conventional SPME fibers in terms of having a larger stationary phase volume and higher mechanical stability. We provide detailed information on the selection of SPME Arrows and general precautions. Please take a moment to read it. 【Contents (partial)】 ■ Selection of SPME Arrow ■ Restek PAL SPME Arrow Conversion Kit ・ PAL System Compatibility ■ SPME Arrow Heating Conditioning and Solvent Washing ・ General Precautions ・ Heating Conditioning * For more details, please refer to the PDF document or feel free to contact us.

• Separation device
• Technical and Reference Books

The goal was excellent performance! It has good extraction efficiency and enables the extraction and analysis of lower concentration components.

At Restek, we offer the SPME product "Restek PAL SPME Arrow." This groundbreaking product features high-speed extraction and trace-level extraction performance, along with excellent robustness. Compared to conventional SPME fibers, it allows for a larger liquid phase volume, enabling the extraction of more compounds in a shorter time. 【Features of Restek PAL SPME Arrow】 ■ Durable and robust stainless steel construction ■ More efficient sample throughput with shorter extraction times ■ High extraction efficiency, allowing for the extraction and analysis of lower concentration components ■ Suitable for a wide range of target compounds and sample matrices *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.