Exhibition "Sewerage Exhibition '25 Osaka"

Achieve a continuous constant flow without pulsation, without using an air chamber! Measurement is possible with a flow meter!

The smooth flow pump "BPL Series" is diaphragm-type and achieves a continuous, pulsation-free flow without using an air chamber, allowing for measurement with a flow meter. There is no inconsistency in the injection and mixing of chemical solutions, enabling stable quality control at all times, and the power consumption is less than half that of air-driven pumps or rotary pumps. 【Features】 ■ Achieves a continuous, pulsation-free flow. ■ No mechanical seals, so there is no liquid leakage to the outside. ■ No need for an air chamber, eliminating piping vibrations due to air reduction and the risk of chemical spillage from air chamber damage. ■ The absence of pulsation allows for design with smaller and more cost-effective piping. ■ Since the flow is constant, the usage of chemicals can be managed with a flow meter. ■ Compared to conventional diaphragm pumps (300L/H class), CO2 emissions are reduced by approximately 50%. ★ For more details, please download the catalog. We also accept requests for loan units. Feel free to contact us.

• Positive Displacement Pump
• Flow Control
• Water treatment equipment

A dedicated machine for injecting sodium hypochlorite with peace of mind. It features an inline automatic air release mechanism and a double block with an air block mechanism!

This is a dedicated pump for hypochlorite injection with a gas lock-free type. 【Features】 ■ Automatic air release mechanism that reliably eliminates sucked-in air Adopts a special valve seat mechanism (patented) that allows air to be easily released. It automatically and reliably eliminates air that may mix into the pump head, quickly expelling it during restart after long periods of inactivity or during low-speed operation. ■ Air block mechanism that prevents air from mixing into the pump head (DCLPW only) An air block mechanism that prevents air mixing. Even when up to 15cc of air is rapidly injected, no air will mix into the pump head. ■ Pump head designed to minimize air retention The flow path within the pump head is minimized to reduce dead space, decreasing the amount of air mixing and retention, thereby increasing the compression ratio for easier air expulsion. ■ Transparent acrylic head for easy visibility The transparent acrylic head allows for immediate visibility of the pump's operational status, as well as the state of air mixing and retention. ■ Dedicated injection nozzle to prevent clogging at the injection point The dedicated nozzle prevents backflow of raw water and crystallization or clogging due to reactions with raw water at the injection point. Please feel free to contact us as we will help you select and introduce the most suitable product for you.

• Positive Displacement Pump
• Flow Control
• Water treatment equipment

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.