Registration for INCHEM TOKYO 2025 is now open!

Explosion-proof automatic filling machine for liquids compatible with various containers such as 18L cans, poly cans, drum cans, IBC containers, and canisters. A container-compatible type can also be manufactured.

This is a pressure-resistant explosion-proof liquid filling machine that can be used in hazardous locations. It contributes to the automation of filling operations in explosion-proof areas. Additionally, by installing a weighing scale on the machine side, it can also accommodate the JIS standard for automatic weighing. We also offer space-saving models for customers who have limited installation space. We can manufacture special specifications of filling machines that are not listed in the catalog, so please feel free to contact us. ■ Compatible with various containers such as 18L cans, polycans, drum cans, IBC containers, BIB containers, and containers with inner bags ■ The liquid contact parts are available in a variety of materials, including stainless steel and fluororesin (PTFE) ■ The filling valve is easy to disassemble and clean, providing excellent sanitary properties ■ Container-compatible types can also be manufactured, such as drum/container combined types and one-gallon can/drum combined types *Electrical equipment used in hazardous locations must have domestic explosion-proof certification in Japan, even if it has been certified for explosion-proof use overseas, such as IECEx or ATEX. Our products have obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas.

• Filling and bottling machines
• Scale
• Weighing Machine

It is possible to achieve low-cost control of peripheral devices and data collection in hazardous locations (explosion-proof areas)! This contributes to the explosion-proofing of control panels!

We have housed the MELSEC Q series sequencer in a pressure-resistant explosion-proof box and obtained domestic explosion-proof certification. Electrical equipment used in hazardous locations, even if certified for explosion-proof use overseas such as IECEx or ATEX, cannot be used in Japan without undergoing domestic explosion-proof testing. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas. If the power supply ratings and other standards are met, it is possible to replace units from the Q series that are not standard. It is ideal for replacing conventional air purge panels and similar equipment. Since it can control external devices such as solenoid valves in hazardous locations, replacing the control unit of existing equipment with this product makes it easier to achieve explosion-proof compliance. Additionally, it can accept inputs from sensors and measuring instruments, allowing for easy construction of data collection systems in hazardous locations. When combined with our product, the "Pressure-Resistant Explosion-Proof CC-Link Remote I/O Expansion Unit," it is also possible to expand the number of signal I/O and analog I/O points, enabling the construction of data collection and signal monitoring systems in hazardous locations. [Related Products] Pressure-Resistant Explosion-Proof CC-Link Remote I/O Unit Pressure-Resistant Explosion-Proof Fiber Optic Photoelectric Sensor

• PLC
• controller
• Display

We have housed fiber optic photoelectric sensors released by major companies in a pressure-resistant explosion-proof box and obtained labor inspection certification! Accurate detection in hazardous locations is possible!

If the detection location is in an explosion-proof area and the amplifier cannot be placed nearby, there is a method to extend it by ordering a fiber unit, but there are the following disadvantages: 1. If the distance between the detection location and the amplifier is long, the light may attenuate, making accurate detection impossible. 2. There are labor and costs associated with wiring fragile photoelectric tubes over long distances. In such cases, please consider this product. This product houses the power supply and amplifier in a pressure-resistant explosion-proof box and has obtained domestic explosion-proof certification (TIIS), allowing for detection at close range without light attenuation. ■ This is a pressure-resistant explosion-proof type of fiber optic photoelectric sensor that could not be used in hazardous locations before. ■ It can be used for accurate presence detection and for detecting the rotation speed of rotating bodies in explosion-proof areas. ■ Up to three sets of amplifiers and fiber units can be housed. Additionally, by using our pressure-resistant explosion-proof PLC and pressure-resistant explosion-proof CC-Link remote expansion unit in conjunction, it is also possible to build a monitoring and management system that can operate entirely within hazardous locations.

• Sensors
• Distance measuring device
• Optical Measuring Instruments

This is a pressure-resistant explosion-proof batch counter that can be used in hazardous locations. It can connect multiple flow meters and temperature sensors, allowing for batch settings and control for each one.

It can be connected to two standard flow meters in a hazardous area and allows for valve control. It also supports various types of temperature inputs such as temperature resistance thermometers and thermocouples. It features an easy-to-understand color LCD screen and a numeric keypad that facilitates batch settings. *Electrical equipment used in hazardous locations must have domestic explosion-proof certification in Japan, even if it has been certified for explosion-proof use overseas, such as IECEx or ATEX. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in hazardous areas.

• Flow Meter
• Flow Control
• Weighing Control

This is a pressure-resistant explosion-proof rotary connector that can be used in hazardous locations. It allows for the transmission of electrical signals and power supply from the fixed part to the rotating part in hazardous areas.

This product is a pressure-resistant explosion-proof rotary connector (rotary connector) that can be used in hazardous locations. Thanks to the low contact resistance and low noise characteristics of the built-in rotary connector, it can accommodate a wide range of electrical devices such as strain gauges and thermocouples, while being capable of carrying a large current relative to its size. *Electrical equipment used in hazardous locations must have domestic explosion-proof certification in Japan, even if it has been certified for explosion-proof use overseas, such as IECEx or ATEX. This product has obtained domestic explosion-proof certification (TIIS certification) and can be safely used in explosion-proof areas.

• Other Connectors
• Other power sources
• Wiring materials

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.