[Catalog Update] Needle Stop Valve / Metal Diaphragm Valve / UJR Fitting / UPG Fitting / FCS-T / FCS-P

It is a valve that can do anything (versatile) and "satisfies" all functions and forms.

<Features> 1. As a product certified by the Minister of High-Pressure Gas, it is designed with safety in mind. 2. The body has a robust forged finish and is compact due to its bonnetless design. 3. The stem is shaped like a needle, allowing for easy and precise flow adjustment with stability. 4. With Fuji Kin's unique combination packing and a design focused on operability, the handle torque is low, resulting in a more effective sealing structure. 5. The handle features a drainage hole and is designed for ease of operation, making it easy to attach the valve number nameplate. 6. Optional parts include a lock nut and an opening degree indicator. 7. The body is shaped for easy fixation with U-bolts.

• valve

<FINE series PURE> is a direct diaphragm valve for ultra-high purity use.

<Features> 1. Good replacement characteristics. 2. Diaphragm made of high-durability nickel-cobalt alloy.

• valve

<FINE series PURE> is a metal gasket type fitting for ultra-high purity applications.

<Features> 1. The sleeve displays the tube size, allowing for easy size identification at a glance. 2. The threaded part of the nut has been treated with silver plating, preventing thread seizing. 3. A special hardness enhancement treatment ensures stable attachment, detachment, and sealing performance.

• Pipe Fittings

This is a super high purity, ultra-small metal gasket type joint for ultra-high purity use.

<Features> 1. Miniaturization (approximately 70% of UJR) 2. Separation of the sealing part and the part subjected to external forces 3. Dead space free 4. Mechanism to prevent excessive tightening and damage to the tip of the sealing part 5. SUS316L W melt material UP treatment standard for liquid and gas contact parts 6. Nut with built-in pure ring

• Pipe Fittings

This is a flow control device that adopts a thermal flow sensor control method.

Achieved further total cost reduction and shortened lead time with a digital interface-equipped mass flow controller. 【Features】 ○ High precision Flow accuracy of ±1% ○ High-performance sensor Adoption of low-temperature flow sensors, achieving optimal structure for highly reactive gases and gases with low stability ○ High-reliability diaphragm valve with reduced gas contact area and prevention of particle generation Adoption of high-speed response piezo actuators Significant improvement in gas replacement characteristics due to dead space-free structure Minimal particle generation ○ Standard digital interface RS485 ○ RoHS compliant ● For other functions and details, please download the catalog.

• Flow Control

This is a flow control device that adopts a pressure control method for ultra-high purity applications.

A flow control system that enables high-precision flow control, which cannot be achieved with conventional mass flow controllers, by controlling pressure. 【Features】 ○ Simple and dead space-free structure ○ Excellent pressure fluctuation characteristics Since the output value does not fluctuate even when the upstream pressure varies, it can be installed on the upstream side. Additionally, it allows for the elimination of regulators from the gas system, achieving both cost reduction and miniaturization of the gas system. ○ Adoption of flow factor Compatible with various types of gases ○ Excellent accuracy ○ Equipped with flow self-diagnosis function ○ Quick response ○ Mount position free ○ Supports device network communication ● For other functions and details, please download the catalog.

• Flow Control

In civil engineering sites, steel plates have traditionally been the standard, but in recent years, more companies are choosing wooden mats to suit site conditions. Hyper CLT mats, utilizing wood CLT as civil engineering materials, are being introduced for a wide range of applications including public works, temporary roads, access routes, material yards, and temporary parking lots. The reasons for their selection are not simply because they are "made of wood." The 5×10 panels weigh about 230 kg, making them lightweight and easy to install and remove even with small machinery, with a maximum capacity of 40 panels on a 10-ton truck. This also leads to improvements in workability and transportation efficiency. Furthermore, they add different values to the site compared to steel plates, such as reducing glare and radiant heat, noise control, CO2 fixation, and consideration for aesthetics. They can be partially used only where needed, allowing for differentiation in use from steel plates. This technology is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The introduction of Hyper CLT mats is expanding as a new option that combines wood, NETIS, and civil engineering.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.